National Item Identification Number
01-398-3361
013983361
2940-01-398-3361
2940013983361
National Stock Number
Item Name
FILTER,FLUID
Federal Supply Class
2940
Referenced on: http://trucks10ton.tpub.com//TM-9-2320-360-24P/css/TM-9-2320-360-24P_1020.htm
Referenced on: http://trucks10ton.tpub.com//TM-9-2320-360-24P/css/TM-9-2320-360-24P_307.htm
Referenced on: http://trucks10ton.tpub.com//TM-9-2320-360-24P/css/TM-9-2320-360-24P_932.htmDescription
A filter having inlet and outlet connections and designed to be connected in a pipe, tube or hose line. For spin-on, base-mounted filtering devices with integral outer casings, see FILTER ELEMENT, FLUID. Excludes AIR CONDITIONER.
Commercial and Government Entity Code (Supplier Data)
59556
KOVATCH CORPORATION
1 INDUSTRIAL COMPLEX
NESQUEHONING
PA
18240
570-669-5199
94330
WIRE CLOTH FILTER MFG CO JSN INC
DBA WIRE CLOTH FILTER MFG CO
611 SAINT CHARLES RD
MAYWOOD
IL
60153
708-410-1800
45152
OSHKOSH TRUCK CORPORATION
DIV OSHKOSH TRUCK CORPORATION
2307 OREGON ST
OSHKOSH
WI
54902
800-392-9921
45152
OSHKOSH TRUCK CORPORATION
DIV OSHKOSH TRUCK CORPORATION
2307 OREGON ST
OSHKOSH
WI
54902
800-392-9921
45152
OSHKOSH TRUCK CORPORATION
DIV OSHKOSH TRUCK CORPORATION
2307 OREGON ST
OSHKOSH
WI
54902
800-392-9921
73342
73342
K4285
TEREX EQUIPMENT LTD
NEWHOUSE INDUSTRIAL ESTATE
MOTHERWELL
ML1 5RY
UNITED KINGDOM
01698 732121
U2477
MITCHELL DIESEL LIMITED T/A MITCHELL
OWERSYSTEMS
FULLWOOD ROAD SOUTH
SUTTON-IN-ASHFIELD
NG17 2JZ
UNITED KINGDOM
01623 550550
73342
45152
OSHKOSH TRUCK CORPORATION
DIV OSHKOSH TRUCK CORPORATION
2307 OREGON ST
OSHKOSH
WI
54902
800-392-9921
NSN (National Stock Number) 2940-01-398-3361, 2940013983361 NIIN (National Identification Number) 01-398-3361, 013983361
Part Numbers (Reference Numbers)
039-90005-214
1545
2AX970
2GA488
2HS243
20505563
23013625
29505563
29505
Required Categories
SPECIAL FEATURES
III END ITEM IDENTIFICATION
Required Description
PENDING USER COORDINATION THIS ITEM TO BE STOCKED WITH NSN 2520-01-096-1739
SO 01-398-3362 GUIDE,VALVE STEM 4820 A replaceable cylindrical item designed to provide wear surface and maintain alignment of a reciprocating valve stem and the like, it may have a flange(s) and/or grooves. 0JAU7
66503
99207 3259-060
3259-060
3259-060 MATERIAL STEEL, CORROSION RESISTING 01-398-3363 HOUSING,FLYWHEEL 2815 An item designed to enclose the flywheel and related parts, clutch, plates, ring gear and the like on the end of the cylinder block. May be fabricated from a single casting or compound of two separate castings and may include mounting facilities. 11083
11083 1192920
9Y9881 END ITEM IDENTIFICATION 2320-01-383-2047 01-398-3364 OIL PAN 2815 A metal item designed to be attached to the lower portion of an internal combustion engine, compressor, hydraulic transmission, and the like. It serves as a reservoir for lubrication oil and may include baffle(s), oil cooler connectors, or the like. For items furnished with gasket(s), hardware, drain plugs, and the like, see PARTS KIT, OIL PAN. 11083 108-1233 ENGINE/COMPRESSOR DESIGN CONTROL ACTIVITY
III END ITEM IDENTIFICATION 11083
2320-01-383-2047 01-398-3365 PISTON,INTERNAL COMBUSTION ENGINE 2815 11083
11083 1014495
4P1550 HEAD STYLE
SKIRT BOTTOM CUTAWAY FEATURE
RING GROOVE QUANTITY
CARBON GROOVE
P B12 CAVITY
INCLUDED
3
NOT INCLUDED
NOT INCLUDED
INCLUDED
NOT INCLUDED
LOC 01-398-3366 MANIFOLD,INTAKE 2990 A preformed metallic item with one or more inlet ports and two or more outlet ports. It is designed to collect and direct air (diesel application) and/or fuel-air mixture (gasoline application) to the cylinders of an internal combustion engine. 11083 4P1618 INLET CONNECTION TYPE
INLET QUANTITY
TEMP REGULATING VALVE OPENING
III END IT PIPE
2
NOT INCLUDED
2320-01-383-2047 01-398-3367 BELT,V 3030 1VZM7
81300
1VZM7
81300
04NP0
73842
11083
24161 17343
17343
17343GL
17343GL
17345
17345
7E0744
9345 MATERIAL
STYLE DESIGNATOR
ANGLE IN DEG
NOMINAL WIDTH
OUTSIDE LENGTH
END ITE RUBBER CHLOROPRENE CLASS CR AND
RUBBER NATURAL AND
RUBBER SYNTHETIC OVERALL
A 01-398-3368 GEARSHAFT,SPUR 3040 A gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS. 11083 2W8087 SHAFT TYPE
GEAR LOCATION ON SHAFT
SHAFT END TYPE
III END ITEM IDENTIFICATION STRAIGHT
OFF CENTER BETWEEN ENDS OF SHAFT
PLAIN
2320-01-383-2047 01-398-3369 INJECTOR ASSEMBLY,FUEL 2910 An item consisting of springs, o-rings, plungers and miscellaneous internal and external parts that provide atomized fuel at specific pressure(s) to engine combustion chambers. It may include NOZZLE, FUEL INJECTION. 11083
11083 101-8673
1278213 ENGINE DESIGN CONTROL ACTIVITY
III END ITEM IDENTIFICATION 11083
2320-01-383-2047 01-398-3370 GEARSHAFT,SPUR 3040 A gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS. 11083 2W8090 SHAFT TYPE
GEAR LOCATION ON SHAFT
SHAFT END TYPE
III END ITEM IDENTIFICATION STRAIGHT
MIDPOINT BETWEEN ENDS OF SHAFT
PLAIN
2320-01-383-2047 01-398-3371 MANIFOLD,EXHAUST 2815 A preformed metallic item with two or more inlet ports and passages, and a common outlet designed to collect and direct exhaust gases from the cylinders of an internal combustion engine. 11083 7W7728 INLET CONNECTION TYPE
BOLT HOLE QUANTITY
OUTLET END CONNECTION TYPE
TEMP REGU FLANGED
12
FLANGED
NOT INCLUDED
2320-01-383-2047 01-398-3372 CONTROL ASSEMBLY,PUSH-PULL 3040 A control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE. 11083 4P5745 EFFECTIVE LENGTH
SPECIAL FEATURES
III END ITEM IDENTIFICATION 6.100 INCHES NOMINAL
USED IN GOVERNOR GP-UNIT INJECTOR FUEL SYSTEM 113-1989
23 01-398-3373 CAM,CONTROL 3040 An irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified). 11083 102-0679 CAM WIDTH
CAM OVERALL LENGTH
OVERALL HEIGHT
SPECIFIC USE
FEATURES PROVIDED; 4.000 INCHES NOMINAL
4.500 INCHES NOMINAL
0.100 INCHES NOMINAL
GOVERNORS-UNIT 01-398-3374 PROPELLER SHAFT WITH UNIVERSAL JOINT 2520 INC 17664 CANCELLED/REPLACED BY ,INC 52092, FIIG A522H0, APP-KEY ,INC 52091, FIIG A522H0, APP-KEY , ON 041996 A PROPELLER SHAFT having a UNIVERSAL JOINT on one or both ends. See also UNIVERSAL JOINT. 34623
95019
19207
95019
95019 RCSK-14787
RCSK-14787
12448544
910902-1
915587-1 01-398-3375 CYLINDER HEAD,DIESEL ENGINE 2815 An item designed to inclose the cylinder bore(s) of an engine block to form a combustion chamber(s). It may have liquid cooling passage(s) and/or air cooling fin(s) and may include valve(s), valve guide(s), rocker arm(s), injector tube(s), and the like. It is a component part of an ENGINE, DIESEL. See also CYLINDER HEAD, GASOLINE ENGINE. 11083 107-7592 CYLINDER QUANTITY
USAGE DESIGN
III END ITEM IDENTIFICATION 6
VEHICULAR
2320-01-383-2047 01-398-3376 HEAD,VALVE 4820 An item designed to mate with a hydraulic or pneumatic valve body. It must have inlet and/or outlet port(s). For items without ports see CAP (1), VALVE. 93784 5001A141 VALVE DESIGN CONTROL ACTIVITY
VALVE SIZE FOR WHICH DESIGNED
PORT QUANTITY
POR 93784
0.875 INCHES
4
THREADED INTERNAL TUBE 01-398-3377 WINDOW,VEHICULAR 2510 A single or multi-piece item(s), curved or flat, with frame(s), of transparent materiel. Designed for mounting in a vehicular body, door and the like, to protect personnel from foreign matter and to allow visibility. Also includes curved windows without frames forming part of a vehicular body. Excludes GLASS, LAMINATED
GLASS, SAFETY, SINGLE PLATE
PLASTIC SHEET
GLASS SHEET. 20722 8909-700-143 PANE QUANTITY
PANE MATERIAL
PANE LENGTH
PANE WIDTH
PANE THICKNESS
SAFETY GL 1
GLASS
0.125 INCHES NOMINAL
28.750 INCHES NOMINAL
26.420 INCHES NOMINAL
IN 01-398-3378 HANDLE,DOOR,VEHICULAR 2540 A device designed to actuate the mechanism of a vehicular door latch, either by turning or lifting the handle, or by operation of a PUSH BUTTON or trigger. 20722 8909-700-154 END ITEM IDENTIFICATION 3930-01-330-8906 01-398-3379 PROPELLER SHAFT WITH UNIVERSAL JOINT 2520 INC 17664 CANCELLED/REPLACED BY ,INC 52092, FIIG A522H0, APP-KEY ,INC 52091, FIIG A522H0, APP-KEY , ON 041996 A PROPELLER SHAFT having a UNIVERSAL JOINT on one or both ends. See also UNIVERSAL JOINT. 19207
34623
95019
95019 RCSK-14695
RCSK-14695
905689-3216
918860 01-398-3380 WHEEL,PNEUMATIC TIRE 2530 A wheel with an integral or removable rim designed to mount a pneumatic tire. Includes wheels without rims but designed to accommodate pneumatic tire rims. May include tire(s). Excludes WHEEL, LANDING GEAR. 19207
34623
41885
19207
41885 RCSK-14649-2
RCSK-14649-2
X90794
12448697
90794 TIRE RIM NOMINAL DIAMETER
TIRE
DESIGN FORM
DISK TYPE
MOUNTING FACE TYPE
LIG 20.000 INCHES
NOT INCLUDED
DISK
SINGLE
CENTERED
NOT INCLUDED
NOT INCLUDED; 01-398-3381 GEAR,INTERNAL 3020 A gear with teeth formed on the inner surface of a cylinder or cone. 70210 2743833-1 TEETH QUANTITY
STYLE DESIGNATOR
III END ITEM IDENTIFICATION 64
44 FLANGED RING
ALLIED SIGNAL OUTFLOW VALVE ACTUATOR,P/N 2740164-1 01-398-3382 GEAR,SPUR 3020 A gear, cylindrical in form, with straight teeth on the outer surface parallel to the axis of the gear. See also GEAR, ANTIBACKLASH, SPUR. For bulk material, see ROD, PINION. 70210 2047310-1 TEETH QUANTITY
NOMINAL OUTSIDE DIAMETER
BORE STYLE
III END ITEM IDENTIFICATIO 40
1.773 INCHES
10A W/KEYWAY BOTH ENDS
ALLIED SIGNAL OUTFLOW VALVE ACTUATOR,P 01-398-3383 GEAR,SPUR 3020 A gear, cylindrical in form, with straight teeth on the outer surface parallel to the axis of the gear. See also GEAR, ANTIBACKLASH, SPUR. For bulk material, see ROD, PINION. 70210 2047311-1 TEETH QUANTITY
STYLE DESIGNATOR
NOMINAL OUTSIDE DIAMETER
III END ITEM IDENTIF 9
4 PROTRUDING HUBS
0.706 INCHES
ALLIED SIGNAL OUTFLOW VALVE ACTUATOR 01-398-3384 COMPRESSOR,RECIPROCATING 2530 A positive displacement compressor designed to compress air or gas from an initial intake pressure to a higher discharge pressure by means of reciprocating piston(s) in cylinder(s). It is designed to be driven by an independent power source, such as an electric motor, gasoline or diesel engine, or the like. It does not include the prime mover, air storage tank, and the like. It may include various peripheral components, such as drive pulley, unloader, and the like. 11083 4P5435 GAS FOR WHICH DESIGNED
UNLOADER TYPE
SPECIAL FEATURES AIR
AUTOMATIC
E/I 2320-01-383-2047 01-398-3385 GEARSHAFT,SPUR 3040 A gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS. 70210 2743825-1 TEETH QUANTITY
SHAFT TYPE
GEAR LOCATION ON SHAFT
SHAFT END TYPE
III END ITEM 19
SHOULDERED
OFF CENTER BETWEEN ENDS OF SHAFT
PLAIN AND
SPLINED STRAIGHT
A 01-398-3386 CARRIER,GEAR ASSEMBLY 3010 A device designed to support and position one or several gear assemblies functioning as a unit. It may contain bearings, shafts, pins or the like. 70210
70210 2743485-1
2743800-1 END ITEM IDENTIFICATION
SPECIAL FEATURES ALLIED SIGNAL OUTFLOW VALVE ACTUATOR,P/N 2740164-1
DIA 0.6015 X 6.72 IN. 01-398-3387 SEAT,VALVE 4820 A replaceable item designed to provide a circular stationary seating surface for a mating, moveable item such as a valve disk or the like. The body may have a flange of various shapes. For diesel and gasoline reciprocating engines, see INSERT, ENGINE VALVE SEAT. 59364
59364 3180444
3180444-1 SPECIAL FEATURES
III END ITEM IDENTIFICATION 1.060 IN. O/A LG
MCDONNELL DOUGLAS CORP AIRCRAFT MODEL NO. C-17A 01-398-3388 ACTUATOR ASSEMBLY,PARKING BRAKE 2530 83445 51882-2 GENERAL CHARACTERISTICS ITEM DESCRIPTION
III END ITEM IDENTIFICATION RIGHT-HAND APPLICATION
1730-01-291-9248 01-398-3389 ACTUATOR ASSEMBLY,PARKING BRAKE 2530 83445 51882-1 GENERAL CHARACTERISTICS ITEM DESCRIPTION
III END ITEM IDENTIFICATION LEFT APPLICATION
1730-01-291-9248 01-398-3390 HEATING ELEMENT,ELECTRICAL,IMMERSION TYPE 2990 An electrical device in the form of a resistor consisting of a resistance wire, an insulating material, and a sheath. It is designed to transform electrical current into heat while immersed in a liquid to be heated or in contact with materials to be melted. It may include an automatic control to regulate the amount of heat generated. 7T417 MODEL 16 ELEMENT RADIATION SPECTRUM
HEAT CONTROL TYPE
EFFECTIVE HEATING LENGTH
ELEMENT NONINFRARED
THERMOSTAT
4.000 INCHES NOMINAL
1
1
STANDARD
HEATER,OIL PAN
C 01-398-3391 ELBOW,TUBE 4730 A fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. 88277
88277 17G450074
17G450074-73 MATERIAL
CONNECTION TYPE
CONNECTION STYLE
SEAT ANGLE
THREAD CLASS
FLOW ANGL STEEL CORROSION RESISTING OVERALL
THREADED INTERNAL TUBE 1ST END
THREADED EXTE 01-398-3392 COUPLING,TUBE 4730 A straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE. 96906 MS9381-14 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
STYLE DESIGNATOR
CONNECTION TYP STEEL CORROSION RESISTING OVERALL
AMS5646 ASSN STD SINGLE MATERIAL RESPONSE OVE 01-398-3393 PLUG,PIPE,MAGNETIC 4730 A pipe fitting primarily designed for installation in a lubrication or hydraulic system. It has an integral magnet in the body and external pipe threads. 61748 9200W000245 III END ITEM IDENTIFICATION 4610-01-295-2720 01-398-3394 COUPLING,TUBE 4730 A straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE. 96906 MS9381-16 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
STYLE DESIGNATOR
CONNECTION TYP STEEL CORROSION RESISTING OVERALL
AMS5646 ASSN STD SINGLE MATERIAL RESPONSE OVE 01-398-3395 ADAPTER,STRAIGHT,PIPE TO TUBE 4730 An adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line. 0S1H5
20722 6505-4-4
8909A915-001 MATERIAL
CONNECTION TYPE
CONNECTION STYLE
SEAT ANGLE
NOMINAL OUTSIDE DIAMETE STEEL OVERALL
THREADED INTERNAL TUBE 1ST END
THREADED EXTERNAL PIPE 2ND END
B 01-398-3396 REDUCER,TUBE 4730 A straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified). 54214
81343
98441
30780
45681
30780 J815-6-4SS
6-4 070119S
6-4LHBTX-SS
6-4LHBTXSS
6-4LHBTXSS
6-4LHTX-SS MATERIAL
CONNECTION TYPE
CONNECTION STYLE
SEAT ANGLE
NOMINAL OUTSIDE DIAMETE STEEL CORROSION RESISTING OVERALL
THREADED EXTERNAL TUBE ALL ENDS
B64 FLARED A 01-398-3397 TEE,PIPE 4730 A fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings. 81343
81343 J530
2-2-2 130424S MATERIAL
CONNECTION TYPE
CONNECTION STYLE
NOMINAL PIPE SIZE ACCOMMODATED
THR STEEL CORROSION RESISTING OVERALL
UNTHREADED INTERNAL PIPE 1ST END
UNTHREADED 01-398-3398 HOSE ASSEMBLY,NONMETALLIC 4720 A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT
and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. 01276
20722
20722
20772 1C01772EEE0140A
8909-900-068
8909A900-001
8909A900-068 INNER CONVEYING TUBE MATERIAL
MEDIA FOR WHICH DESIGNED
INSIDE SURFACE CONDITIO RUBBER, SYNTHETIC
FUEL/OIL, HYDROCARBON
SMOOTH
1ST LAYER BRAIDED CORROSION RE 01-398-3399 ELBOW,TUBE TO BOSS 4730 A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. 81343 20-20 070320S MATERIAL
CONNECTION TYPE
CONNECTION STYLE
SEAT ANGLE
NOMINAL OUTSIDE DIAMETE STEEL CORROSION RESISTING OVERALL
THREADED EXTERNAL TUBE 1ST END
THREADED EXTE 01-398-3400 VALVE,CHECK 4820 A valve permitting flow in one direction only. It does not have a stem, except when equipped with a lever and weight and has no pressure adjustment. It may be inline or cartridge (manifold) design. 05624
05395 CYLB51405-1
85CD0505-1 MATERIAL
STYLE DESIGNATOR
FLOW CONTROL DEVICE
MAXIMUM OPERATING PRESSURE
MAX ALUMINUM ALLOY 2017 BODY
A6 STRAIGHT THRU
DISK
8.0 POUNDS PER SQUARE INCH SIN 01-398-3401 CAM,CONTROL 3040 An irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified). 1E045
1E045
20722 AE1-27296ZN
1/27296
8909A700-170 SURFACE TREATMENT
CAM WIDTH
CAM OVERALL LENGTH
SPECIFIC USE
III END ITEM IDE ZINC
1.600 INCHES NOMINAL
1.700 INCHES NOMINAL
CABINET DOORS ON TRUCKS
3930- 01-398-3402 COUPLING ASSEMBLY,QUICK DISCONNECT 4730 A multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings. 11201 DV316E-0346 MATERIAL
SURFACE TREATMENT
STYLE DESIGNATOR
LEG LENGTH
OVERALL LENGTH
CONNE STEEL OVERALL
ZINC OVERALL
A2 COUPLING ASSEMBLY
4.180 INCHES NOMINAL
6.200 I 01-398-3403 HOSE ASSEMBLY,NONMETALLIC 4720 A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT
and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. 00624
26512 AE2460050E2440
GH12AR1E2440NH INNER CONVEYING TUBE MATERIAL
MEDIA FOR WHICH DESIGNED
INSIDE SURFACE CONDITIO RUBBER, SYNTHETIC
FUEL/OIL, HYDROCARBON
SMOOTH
OUTER LAYER MOLDED RUBBER, SYN 01-398-3404 HOSE ASSEMBLY,NONMETALLIC 4720 A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT
and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. 00624
26512 AE2460250G1620
GH12AR3G1620NH INNER CONVEYING TUBE MATERIAL
MEDIA FOR WHICH DESIGNED
INSIDE SURFACE CONDITIO RUBBER, SYNTHETIC
FUEL/OIL, HYDROCARBON
SMOOTH
OUTER LAYER MOLDED RUBBER, SYN 01-398-3405 HOSE ASSEMBLY,NONMETALLIC 4720 A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT
and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. 00624
26512 AE2460050E0240
GH12AR1E0240NH INNER CONVEYING TUBE MATERIAL
MEDIA FOR WHICH DESIGNED
INSIDE SURFACE CONDITIO RUBBER, SYNTHETIC
FUEL/OIL, HYDROCARBON
SMOOTH
OUTER LAYER MOLDED RUBBER, SYN 01-398-3406 HOSE ASSEMBLY,NONMETALLIC 4720 A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT
and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. 00624
26512 AE2460050E2260
GH12AR1E2260NH INNER CONVEYING TUBE MATERIAL
MEDIA FOR WHICH DESIGNED
INSIDE SURFACE CONDITIO RUBBER, SYNTHETIC
FUEL/OIL, HYDROCARBON
SMOOTH
OUTER LAYER MOLDED RUBBER, SYN 01-398-3407 TANK,HOT WATER STORAGE 4520 An item formed of metal, cylindrical in shape, with openings for pipe connections. Its primary purpose is to store heated water for distribution to various desired outlets. 14776
14776 300-0246-01
300-246 OVERALL LENGTH
OVERALL HEIGHT
MAXIMUM OPERATING PRESSURE
MATERIAL
SURFACE TR 7.750 INCHES NOMINAL
8.000 INCHES NOMINAL
NOT RATED
STEEL, CORROSION RESISTIN 01-398-3408 HEATING ELEMENT,ELECTRICAL,IMMERSION TYPE 4540 An electrical device in the form of a resistor consisting of a resistance wire, an insulating material, and a sheath. It is designed to transform electrical current into heat while immersed in a liquid to be heated or in contact with materials to be melted. It may include an automatic control to regulate the amount of heat generated. 14776
14776 200-0367-01
200-367-1 BODY STYLE
OVERALL LENGTH
OUTSIDE DIAMETER
ELEMENT RADIATION SPECTRUM
MATERI 30 CARTRIDGE, SCREW TYPE
6.500 INCHES NOMINAL
0.500 INCHES NOMINAL
NONINFRARE 01-398-3409 HOSE ASSEMBLY,NONMETALLIC 4720 A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT
and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. 00624 AE2460250G1800 INNER CONVEYING TUBE MATERIAL
MEDIA FOR WHICH DESIGNED
INSIDE SURFACE CONDITIO RUBBER, SYNTHETIC
FUEL/OIL, HYDROCARBON
SMOOTH
OUTER LAYER MOLDED RUBBER, SYN 01-398-3410 HOSE ASSEMBLY,NONMETALLIC 4720 A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT
and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. 88044
98441 AN6270-4D-0620
193000-4D-0620 INNER CONVEYING TUBE MATERIAL
MEDIA FOR WHICH DESIGNED
INSIDE SURFACE CONDITIO RUBBER, SYNTHETIC
AIR
SMOOTH
1ST LAYER BRAIDED FABRIC
OUTER LAYER MOLDED RUB 01-398-3411 ELBOW,PIPE 4730 A fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE
and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE. 02570
11649 B-4-ME
B-4-ME 01-398-3412 RESTRICTOR,FLUID FLOW 4730 An item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified)
and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW. 59364 3180136-1-1 III END ITEM IDENTIFICATION C-17A AIRCRAFT 01-398-3413 CYLINDER ASSEMBLY,ACTUATING,LINEAR 1650 A cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies. 88277
61898 17B3C6013-1
20500 III END ITEM IDENTIFICATION AIRCRAFT,MCDONNELL DOUGLAS CORP,MODEL C-17A 01-398-3414 RESTRICTOR UNIT,FLUID FLOW 4730 An assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW. 99240
99240
88277 6F3484F00028F
6F3584F00028
7D0269B00028F STRAINER TYPE AND QUANTITY
FLOW RATE AND FLUID TYPE
III END ITEM IDENTIFICATIO 1 FILTER
0.28 GALLONS PER MINUTE WATER
C-17A AIRCRAFT 01-398-3415 ADAPTER,STRAIGHT,PIPE TO TUBE 4730 An adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line. 96906
96906 MS51503A5S
MS51503B5S MATERIAL
SURFACE TREATMENT
CONNECTION TYPE
CONNECTION STYLE
SEAT ANGLE
NOMI STEEL CORROSION RESISTING OVERALL
CADMIUM OVERALL
THREADED INTERNAL PIPE 1ST E 01-398-3416 ADAPTER,STRAIGHT,TUBE TO BOSS 4730 An adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE. 99240
99240
88277
88277 6F3446F00092
6F3566F00092
7D0198
7D0198B00092F MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT TITANIUM ALLOY OVERALL
AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR
4965 ASSN 01-398-3417 BELT,VEHICULAR SAFETY 2540 A band of flexible material, designed to secure a person to a seat in a vehicle as a safety measure. 24617
11862
7X677 P10164949
10164949
10164949 PERSONNEL CAPACITY
SPECIAL FEATURES 1
USED ON GMC, CHEVROLET CAPRICE 1991 4 DOOR SEDAN 01-398-3418 PUMP UNIT,CENTRIFUGAL 4320 An assembled unit consisting of a commonly mounted centrifugal pump(s), prime mover(s), and the necessary components to provide for a complete operation. 30793 D2441 MEDIA FOR WHICH DESIGNED
PUMP QUANTITY
FREQUENCY IN HERTZ
PHASE
III END ITEM WATER, FRESH
1
60.0
SINGLE
INSINGER MACHINE CO. MODEL SPEEDER 86-2 DISHWASHI 01-398-3419 ADAPTER,STRAIGHT,TUBE TO HOSE 4730 An adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting. 59364 3180009-1 III END ITEM IDENTIFICATION C17A AIRCRAFT 01-398-3420 PARTS KIT,VALVE 4820 Do not use if a more specific item name is applicable. 33742 98650/1199 COMPONENT QUANTITY
NONSUPPLY ITEMS AND QUANTITIES 13
PLATE 5
SPRING 5
O-RING 3 01-398-3421 VALVE ASSEMBLY 4820 An assembly of items consisting of two or more complete valves on a common mounting
mounted on each other
or joined together with fitting(s), hose(s), tube(s), pipe(s), or the like. For items consisting of two or more valves in a common body, See VALVE ASSEMBLY, MANIFOLD. 33742 98650/1167 SPECIAL FEATURES
III END ITEM IDENTIFICATION 1ST STAGE SUCTION
MAKO COMPRESSOR MDLS 5408 AND 5409 01-398-3422 VALVE,EXPANSION 4820 A self-acting valve specifically designed for use in refrigeration systems for continual control of rate of flow of refrigerant. It may be actuated by a thermostatic element or self-actuated. 70255 ZZC11/2HW1002B BODY STYLE
BODY MATERIAL
END CONNECTION QUANTITY
FIRST END CONNECTION TYPE
F C1 STRAIGHT THRU
BRASS
3
UNTHREADED INTERNAL TUBE
H1 SOCKET
0.250 INCHES NO 01-398-3423 VALVE,SAFETY RELIEF 4820 A valve designed to automatically release excessive pressures. It is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. It is not designed for regulation of continuously fluctuating loads. It may be inline or cartridge (manifold) design. Excludes VALVE (1), RELIEF, PRESSURE AND TEMPERATURE. 01343
15187
75954
01343
15187
75954 CDS662
CDS662
CDS662
NMP0802D01S0065 CDS662
NMP0802D01S0065 CDS662
NMP0802D MATERIAL
STYLE DESIGNATOR
VALVE SIZE
FLOW CONTROL DEVICE
VALVE OPERATION MET STEEL BODY
C1A ANGLE FLANGED ENDS
0.500 INCHES
DISK
AUTOMATIC
FLANGE ALL EN 01-398-3424 DISK,VALVE 4820 An item of various shapes (usually circular, conical, cylindrical, or rectangular) used to prevent or regulate the flow of liquids or gases through the valve. May include a retainer, screw, holder, and the like. 30263 B-1620-E-0400-7 MATERIAL
STYLE DESIGNATOR
PRESSURE RATING
SPECIAL FEATURES BRONZE, ASTM B61
G46A SWING CHECK
150.0 POUNDS PER SQUARE INCH NOMINAL
COMPON 01-398-3425 SEAT,VALVE 4820 A replaceable item designed to provide a circular stationary seating surface for a mating, moveable item such as a valve disk or the like. The body may have a flange of various shapes. For diesel and gasoline reciprocating engines, see INSERT, ENGINE VALVE SEAT. 30263
30263 B-1620
B-1620-E-0600-6 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SPECIAL FEATURES
III END ITEM I NICKEL ALLOY OVERALL
QQ-N-233,COMP B FED SPEC SINGLE MATERIAL RESPONSE OVERALL; 01-398-3426 SEAT,VALVE 4820 A replaceable item designed to provide a circular stationary seating surface for a mating, moveable item such as a valve disk or the like. The body may have a flange of various shapes. For diesel and gasoline reciprocating engines, see INSERT, ENGINE VALVE SEAT. 30263 B-1620-E-0400-6 STYLE DESIGNATOR
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SPECIAL FEATUR B6 PLAIN
NICKEL ALLOY SEAT
QQ-N-233,COMP.B FED SPEC SINGLE MATERIAL RESPONSE O 01-398-3427 SEAT,VALVE 4820 A replaceable item designed to provide a circular stationary seating surface for a mating, moveable item such as a valve disk or the like. The body may have a flange of various shapes. For diesel and gasoline reciprocating engines, see INSERT, ENGINE VALVE SEAT. 30263
30263 B-1620
B-1620-E-0600-14 STYLE DESIGNATOR
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SPECIAL FEATUR B6 PLAIN
NICKEL ALLOY OVERALL
QQ-N-233 FED SPEC SINGLE MATERIAL RESPONSE OVERA 01-398-3428 SEAT,VALVE 4820 A replaceable item designed to provide a circular stationary seating surface for a mating, moveable item such as a valve disk or the like. The body may have a flange of various shapes. For diesel and gasoline reciprocating engines, see INSERT, ENGINE VALVE SEAT. 0A7U4 3-400-422570 MATERIAL
SPECIAL FEATURES RUBBER POLYETHYLENE SEAT
VALVE,BUTTERFLY 3IN 01-398-3429 DISK,VALVE 4820 An item of various shapes (usually circular, conical, cylindrical, or rectangular) used to prevent or regulate the flow of liquids or gases through the valve. May include a retainer, screw, holder, and the like. 0A7U4 3-400-422203F SPECIAL FEATURES VALVE BUTTERFLY 3IN 01-398-3430 VALVE,SAFETY RELIEF 4820 A valve designed to automatically release excessive pressures. It is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. It is not designed for regulation of continuously fluctuating loads. It may be inline or cartridge (manifold) design. Excludes VALVE (1), RELIEF, PRESSURE AND TEMPERATURE. 86184
86184
86184
86184 22118
22118 ASSY 22118-01C
22118-01C
50M-2 2IN P/N 22118-01C MATERIAL
STYLE DESIGNATOR
FACE TO FACE DISTANCE
VALVE SIZE
FLOW CONTROL DEVI RUBBER BODY
C8A STRAIGHT THRU FLANGED ENDS
10.000 INCHES
2.000 INCHES
DISK; 01-398-3431 DISK,VALVE 4820 An item of various shapes (usually circular, conical, cylindrical, or rectangular) used to prevent or regulate the flow of liquids or gases through the valve. May include a retainer, screw, holder, and the like. 30263
30263 B-1620
B-1620-E-0600-7 MATERIAL
STYLE DESIGNATOR
PRESSURE RATING
SPECIAL FEATURES
III END ITEM IDEN BRONZE, ASTM B61
G46A SWING CHECK
150.0 POUNDS PER SQUARE INCH NOMINAL
VALVE 01-398-3432 BELT,V 3030 11862
7X677
04NP0
73842
1VZM7
81300
81300 10085752
10085752
4060970
4060970
5060970
5060970
6PK2465 MATERIAL
STYLE DESIGNATOR
SECTION QUANTITY
NOMINAL WIDTH
OUTSIDE LENGTH
SPE RUBBER CHLOROPRENE CLASS CR AND
RUBBER NATURAL AND
RUBBER SYNTHETIC OVERALL
A 01-398-3433 VALVE,BUTTERFLY 4820 A valve that controls flow by a circular disk, or a pair of semicircular disks, attached to a common spindle or lever turning on a diametral axis. 76588 4.0-52-IQQ-3-1 MATERIAL
STYLE DESIGNATOR
MEDIA FOR WHICH DESIGNED
MAXIMUM OPERATING PRESSURE IRON BODY
NICKEL ALLOY FLOW CONTROL DEVICE
NICKEL ALLOY STEM
A1 STRAIGHT THRU 01-398-3434 YOKE,UNIVERSAL JOINT 2520 INC 17654 CANCELLED/REPLACED BY ,INC 52120, FIIG A522J0, APP-KEY ,INC 52119, FIIG A522J0, APP-KEY , ON 041996 A component of a UNIVERSAL JOINT which is designed to accommodate or include a Spider, block and/or pin(s) of a UNIVERSAL JOINT. The opposite end must have either a flange, hub or splined stub shaft which is designed to be attached to a driving or driven member. For items with a shaft, the length from the end of the shaft to the center of the cross pin, block or Spider bearing accommodations shall not exceed twice the length of the splines. See also PROPELLER SHAFT. 11862
7X677 15580204
15580204 01-398-3435 VALVE,GATE 4820 A valve having a flat or tapered disk (gate) which moves transversely to the axis of flow by rotating or sliding movements of the stem to open or close the orifice. It may also contain an oval or rectangular shaped slide which may be manually, motor, or pressure operated through the means of an arm or arm assembly. The body flange may be designed to accommodate tube type connectors. It may or may not contain thermal relief features. Includes valve (gate) specifically designed for the control of fluid systems in aircraft or missiles. 30263
30263 27-004
27-004-5 01-398-3436 VALVE,SAFETY RELIEF 4820 A valve designed to automatically release excessive pressures. It is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. It is not designed for regulation of continuously fluctuating loads. It may be inline or cartridge (manifold) design. Excludes VALVE (1), RELIEF, PRESSURE AND TEMPERATURE. 04627
30076
S5155
30076 1352032
1352032
21013-20901
21013-20901 SPECIAL FEATURES FORKLIFT 01-398-3437 VALVE,REGULATING,FLUID PRESSURE 4820 A valve designed to automatically maintain within close limits a predetermined outlet pressure which may be adjustable within a specified range regardless of the higher fluctuating or constant inlet pressure. It is designed for use with compressed gas(es) and various liquids and may include gauges. It may be inline or cartridge (manifold) design. Excludes REGULATOR, PRESSURE, MEDICAL GAS ADMINISTRATION APPARATUS
REGULATOR, OXYGEN, BAROMETRIC CONTINUOUS FLOW
REGULATOR, OXYGEN DEMAND
REGULATOR, OXYGEN DILUTER DEMAND
and valve(1), fluid pressure regulating, aircraft. 35795 30 1/4IN 25T45PSI N-522 END CONNECTION QUANTITY
SPECIAL FEATURES 2
MOD 30,1/4IN SIZE,45PSI 01-398-3438 CLAMP,HUB 3040 An item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP. 03956 1859545 MATERIAL
OUTSIDE DIAMETER
THICKNESS
BORE DIAMETER
CLAMP SECURING HOLE STYLE; BRASS, QQ-B-626, ALLOY 360, 1/2H
2.1250 INCHES NOMINAL
0.3200 INCHES NOMINAL; 01-398-3439 PARTS KIT,UNIVERSAL JOINT 2520 A parts kit used for the repair of a universal joint. It consists of bearings and other related components such as seals, lock plates, snap rings, and cap screws. It may include a spider. 11862
11862
11862
7X677 26001364
26018972
26037152
26037152 SPECIAL FEATURES USED ON GENERAL MOTORS LT TRUCK 1993, SPIDER KIT, FRT WHL DRV SHF TRIPOT JT 01-398-3440 CLAMP,HUB 3040 An item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP. 03956 1859557 MATERIAL
SURFACE TREATMENT
STYLE DESIGNATOR
THICKNESS
OVERALL LENGTH
OVERAL BRASS, QQ-B-613, ALLOY 353
BLACK OXIDE
B7 RECTANGULAR, SINGLE BOLT SECURED
0. 01-398-3441 VALVE,BALL 4820 A multi-ported, nonlubricated valve designed to provide straight through flow or ability to direct a number of flows or pressure through a single valve. The flow is controlled by the rotation of a ported ball within a suitable ported seat(s). The ball is usually engaged by a stem. It is normally operated in an open or closed position. Excludes VALVE, CHECK. 30003
30003
62295 1828AS123
1828AS123-1
3K123-27-27-27B-02 MATERIAL
STYLE DESIGNATOR
MEDIA FOR WHICH DESIGNED
MAXIMUM OPERATING PRESSURE STEEL COMP 316 BODY
STEEL COMP 316 FLOW CONTROL DEVICE
A2 CROSS
OXYGEN, GASEO 01-398-3442 BELT,V 3030 51541
24161 025577
9660-0003 MATERIAL
STRENGTHENING FEATURE
STYLE DESIGNATOR
CROSS-SECTIONAL SIZE
NOMINAL RUBBER NEOPRENE OVERALL
SYNTHETIC CORD
A4 DOUBLE PLAIN
BB
0.656 INCHES
197. 01-398-3443 TUBE AND FITTINGS,METALLIC 4710 An item consisting of metal tube, straight or prebent, with permanently attached fittings (brazed or welded) on one or both ends. It is primarily designed to convey fluids, gases, and/or semisolids. For items with detachable end fittings, see TUBE ASSEMBLY, METAL. 81381 82710 TUBING MATERIAL
TUBE OUTSIDE DIAMETER
WALL THICKNESS
END CONNECTION STYLE
MA STEEL, CORROSION RESISTING
1.000 INCHES NOMINAL
0.013 INCHES NOMINAL
B21 UNTH 01-398-3444 FILLER NECK,VEHICULAR COMPONENTS 2590 A metallic tubular item specificlly designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to an engine crankcase, radiator, fuel tank, transmission housing, and the like. It may have means for overflow. For items which do not accommodate a BREATHER or CAP, see TUBE, PIPE or HOSE (as modified). 12190
12190 K-100-N
42593-027 SPECIAL FEATURES U/O HYDRAULIC SERVICE UNIT
INCLUDES PRESSURE CAP 01-398-3445 PARTS KIT,ELECTRO-MECHANICAL ROTARY ACTUATOR 2910 A parts kit used to repair an ACTUATOR, ELECTRO-MECHANICAL, ROTARY. 61724 844144-6 COMPONENT QUANTITY
COMPONENT DOCUMENT ORIGIN
COMPONENT DOCUMENT PAGE NUMBER
A 3
INDUSTRIAL
FUBL.4592
FUBL 4592 1-E11 CATALOG NO.
NONSTERILE
NONREUSABLE 01-398-3446 UNIVERSAL JOINT 3010 INC 04482 CANCELLED/REPLACED BY ,INC 52079, FIIG A521W0, APP-KEY ,INC 52078, FIIG A521W0, APP-KEY ,INC 52077, FIIG A521W0, APP-KEY , ON 041996 A flexible connection which permits rotary motion to be transmitted between two shafts located at an angle to each other. The angle between the shafts may be continually varied within certain limits
the connecting ends must have either a flange, hub or splined stub shaft
the plain portion of a splined stub shaft must not exceed the length of the splines. Excludes drive or propeller shafts with joint(s) at one or both ends. See UNIVERSAL JOINT, GEARED. 88733
0DHG4
95310 50211020-1 REV D IT 2
50212011-1
50212011-1 01-398-3447 COUPLING,TUBE 4730 A straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE. 81349
81349
81349
78062
78062
78062
78062
78062
78062
78062
78062
780 M24714/1
M24714/1-010S-A
M24714/1-10S-A
02-0052-010
21138 FIND 14
21140-14; MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
CONNECTION TY ALUMINUM ALLOY 6061 OVERALL
QQ-A-200 FED SPEC SINGLE MATERIAL RESPONSE OVERALL; 01-398-3448 VALVE,GLOBE 4820 A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK
COCK, SHUTOFF, SCREW STEM
and VALVE, SOLENOID. 0ASY6
0ASY6
0ASY6 MPL2249
M3255
M3255-25 FLOW CONTROL DEVICE
MAXIMUM OPERATING PRESSURE
VALVE OPERATION METHOD
BONNET DISK
150.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
MANUAL
OUTSIDE SCREW-YOKE; 01-398-3449 SHAFT,SHOULDERED 3040 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT
and AXLE(1), STRAIGHT. 53711
53711 211045276
582-6404311-18 MATERIAL
FIRST END STYLE
FIRST END DIAMETER
END SIMILARITY
SECOND END STYLE; STEEL CORROSION RESISTING
1 PLAIN
1.5746 INCHES MINIMUM AND
1.5750 INCHES MAX 01-398-3450 COUPLING,TUBE 4730 A straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE. 81349
81349
78062
78062
78062
78062
59364
78062 M24714/1
M24714/1-117S-A
02-0052-117
21476-400 FIND 7
21487-400 FIND 5
2172 MATERIAL
SURFACE TREATMENT
CONNECTION TYPE
CONNECTION STYLE
NOMINAL OUTSIDE ALUMINUM ALLOY 6061 OVERALL
ANODIZE OVERALL
UNTHREADED EXTERNAL TUBE ALL ENDS; 01-398-3451 COUPLING HALF,QUICK DISCONNECT 4730 A fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. 14127 1815 MATERIAL
STYLE DESIGNATOR
OVERALL LENGTH
CONNECTION TYPE
QUICK DISCONNECT ME COPPER ALLOY BODY
A1 MALE COUPLING HALF
3.265 INCHES NOMINAL
UNTHREADED EXTER 01-398-3452 REGULATOR,THERMOSTATIC TEMPERATURE 4820 A self sensored actuating regulator designed to automatically regulate the flow of liquid or steam through a valve to maintain a predetermined temperature. Designed to close or open a valve when a change in temperature is detected to avoid overheating of controlled unit. Valve body not included. See also REGULATOR (1), TEMPERATURE AND PRESSURE. 55378 50146-19 OPENING TEMP RATING
OPERATING TEMP RATING
CAPILLARY TUBE LENGTH
BULB LENGTH; 60.0 DEG FAHRENHEIT NOMINAL
60.0 DEG FAHRENHEIT MINIMUM AND
90.0 DEG FAHRENHEI 01-398-3453 ROTOR,PUMP 4320 A rotor which is a part of a pump, but does not contain the shaft. For a rotor and shaft, see ROTOR AND SHAFT PUMP ASSEMBLY. 59180
59180
59180 DSC250BA
SF-5352 PIECE 063
SF-5408 PIECE 063 MATERIAL
PUMP MODEL NUMBER FOR WHICH DESIGNED
PUMP DESIGN CONTROL ACTIVITY STEEL
A6DBC-250
59180 01-398-3454 MAGNET ASSEMBLY,FILTER 4330 00736
00736
00736 D3W113-59
LMD3W091070 PC 16
6666PLDPLD3W181532PC5 GENERAL CHARACTERISTICS ITEM DESCRIPTION 6 TEETH;0.400 IN. I/D;1.156 IN. O/D;0.285 IN. THK 01-398-3455 TUBE,METALLIC 4710 A straight, hollow product, welded or seamless, of round, square, or any other cross section and continuous periphery, which does not conform in cross sectional dimensions to recognized pipe standards, or those in Tables 1 through 10, Appendix C, FIIG A004A. It is designed to convey fluids, gasses, and/or semisolids. It may be rolled into coils for ease in handling. For items designed to join a tube or tube fitting to another tube, pipe, or hose or fitting, see ADAPTER (as modified)
COUPLING (as modified)
or NIPPLE (as modified). Excludes TUBE, BENT (as modified)
PIPE, METALLIC
SPACER, SLEEVE
METAL BAR (hollow)
and items with fittings, except end protectors. 81346
51711 ASTM-A500 GR-B,2X4X5/16
6722111 ITEM 32 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
CROSS-SECTIONAL SHAPE STYLE
WAL STEEL
ASTM A500 ASSN STD SINGLE MATERIAL RESPONSE
16 SQUARE/RECTANGULAR
0.312 01-398-3456 CONTROL ASSEMBLY,PUSH-PULL 2590 A control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE. 41625
62809
41625
62809 B048721-005-0600
B048721-005-0600
48721-005-0600
48721-005-0600 EFFECTIVE LENGTH
TRAVEL DISTANCE 60.000 INCHES NOMINAL
5.000 INCHES NOMINAL 01-398-3457 PUMP,FUEL,CAM ACTUATED 2910 A device designed to transfer liquid fuel from a tank to a carburetor, or fuel injector metering and distribution pump of an internal combustion engine. Reciprocating motion of the diaphragm(s) is actuated through linkage from the engine camshaft. It may include a diaphragm actuated vacuum booster. Excludes electrical and rotor type engine fuel pumps. 97947 572-71980 ACTUATION METHOD PUSH ROD 01-398-3458 VALVE,GLOBE 4820 A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK
COCK, SHUTOFF, SCREW STEM
and VALVE, SOLENOID. 53711
80064
53711 803-2177525
803-2177525-M53
803-2177525-M535 1INCH FLG MATERIAL
STYLE DESIGNATOR
FACE TO FACE DISTANCE
VALVE SIZE
FLOW CONTROL DEVI NICKEL ALLOY BODY
NICKEL ALLOY FLOW CONTROL DEVICE
NICKEL ALLOY K-500 STEM
A1 01-398-3459 PUMP,FUEL,METERING AND DISTRIBUTING 2910 A device specifically designed to (1) increase the pressure of, (2) meter the amount of, (3) control the distribution of liquid fuel received directly or indirectly from the TANK, FUEL, ENGINE to the individual air inlet tubes or combustion chambers of gasoline or diesel engines. 97947 328-23090 GENERAL CHARACTERISTICS ITEM DESCRIPTION 1500 RPM 01-398-3460 VALVE,VENT 4820 A valve designed to relieve internal pressure from gear housings, automotive axles, differentials, transmissions and the like. May or may not be threaded on one end. For items with relief pressure ratings see VALVE (1), SAFETY RELIEF. 79128
79128
79128
09032 TATE 52-40 1.5I
1-1/2IN 1600FSG
1600FSG 1.5IN
52-40F 1.5IN MATERIAL
SURFACE TREATMENT
STYLE DESIGNATOR
CONNECTION TYPE
FLANGE SHAPE
NO STEEL BODY
ZINC
A1 STRAIGHT THRU
FLANGE ALL ENDS
ROUND WITH HOLES ALL ENDS; 01-398-3461 ROTOR,PUMP 4320 A rotor which is a part of a pump, but does not contain the shaft. For a rotor and shaft, see ROTOR AND SHAFT PUMP ASSEMBLY. 59180
59180
59180 DSD437AB
SF11062
SF11062 ITEM 16 01-398-3462 CAP,LINEAR ACTUATING CYLINDER 3040 An item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER. 09790 84559 OVERALL WIDTH
SPECIAL FEATURES 1.750 INCHES NOMINAL
1.000 IN.DIA BORE;1.119 IN.DIA COUNTERBORE;FOUR MOUNTING H 01-398-3463 RESTRICTOR,FLUID FLOW 4730 An item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified)
and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW. 09790
09790 78991 ASSY 78991-1
78991-1 01-398-3464 HOUSING,CYLINDER,PNEUMATIC ACTUATOR 3040 A housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like. 09790
09790
09790 84119-1
84140
84140 ITEM 30 MATERIAL
III END ITEM IDENTIFICATION STEEL CORROSION RESISTING
PNEUMATIC REGULATOR, P/N 84140 01-398-3465 COLLAR,SHAFT 3040 An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE
BUSHING, SLEEVE
SPACER, SLEEVE
and COUPLING, SHAFT, RIGID. 18930 AY39116E MATERIAL
SPECIAL FEATURES STEEL, CORROSION RESISTING
PART OF 3 IN. G4 PLUG VALVE 01-398-3466 PLATE,RETAINING,SHAFT 3040 A round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING
END BELL, ELECTRICAL ROTATING EQUIPMENT. 09790 84564 MATERIAL
SHAPE
OUTSIDE DIAMETER
THICKNESS
APERTURE DIAMETER
MOUNTING HOLE Q STEEL
ROUND
3.030 INCHES NOMINAL
0.120 INCHES NOMINAL
1.018 INCHES NOMINAL; 01-398-3467 COLLAR,RETAINING 3040 INC 42749 CANCELLED/REPLACED BY ,INC 13743, FIIG A231A0, APP-KEY B , ON 091997 An item designed to be mounted around a cam, bearing, and/or shaft to limit movement of all attaching items. It is secured directly to to the cam by use of a setscrew(s), pin(s), or the like, which may be part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items having a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP HUB. See also BEARING, SLEEVE
BUSHING, SLEEVE
SPACER, SLEEVE
and COUPLING, SHAFT, RIGID. Excludes COLLAR, SHAFT. 18930 AY38280C 01-398-3468 PARTS KIT,FLUID PRESSURE FILTER 4330 A parts kit used in servicing a FILTER, FLUID PRESSURE. It may contain such items as filter element(s), gasket(s), washer(s), preformed packing, bleeder valve(s), drain cock(s), and the like. 58470
79227
58470 ABK605WY
ABK605WY
BK605WY COMPONENT QUANTITY
NONSUPPLY ITEMS AND QUANTITIES
END ITEM NAME
END ITEM SOUR 9
BOWL W/DRAIN COCK,1
FLANGE RING,1
SCREW,1
DISK SEAL,1
O-RING,2
SSEAL CAP 01-398-3469 HOSE,NONMETALLIC 4720 A flexible, tubular item having a nonmetallic tube inner conveying surface and one or more reinforcement layers of a metallic or nonmetallic material. It is designed to convey gasses, liquids, or solids. For items with fittings on one or both ends, see HOSE ASSEMBLY, NONMETALLIC. Excludes HOSE, AIR DUCT
and HOSE AIR DUCT, AIR BREATHING. 18265
53711
53711
53711 P15-4214
513-5750015 ITEM 5
5750015
5750015 ITEM 5 01-398-3470 TUBING,NONMETALLIC 4720 An item of varying tubular shape molded or extruded from nonmetallic flexible material. It includes flat form plastic flexible tubing designed to be expanded for use and rubber flexible tubing designed to be fabricated into sealing and/or cushioning devices. Excludes HOSE, NONMETALLIC and TUBE (as modified). 00819 4720.604.1-8 NONMETALLIC HARDNESS RATING
MINIMUM TENSILE STRENGTH
TUBING MATERIAL
INSIDE S NOT RATED
NOT RATED
PLASTIC, POLYTETRAFLUOROETHYLENE
SMOOTH
CLEAR
1 ROUND; 01-398-3471 HOSE ASSEMBLY,METALLIC 4720 A length of metallic hose with fittings on one or both ends. For items without fittings, see HOSE, METALLIC. Excludes CONDUIT, ELECTRICAL
CONDUIT ASSEMBLY, ELECTRICAL
CASING, FLEXIBLE CONTROL
and CASING, FLEXIBLE SHAFT ASSEMBLY. 70510 212245-0180 INNER CONVEYING TUBE STYLE
INNER CONVEYING TUBE MATERIAL
LAYER COMPOSITION AND 9 ANNULAR OPEN-PITCH CORRUGATED
STEEL, QQ-S-766, CLASS 321
OUTER LAYER BRAIDED 01-398-3472 GEAR,BEVEL 3020 A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL. 0JF20
0JF20 M405
92-AV101-N-SYM-71 MATERIAL
TEETH QUANTITY
TEETH TYPE
STYLE DESIGNATOR
NOMINAL OVERALL LENGTH; STEEL OVERALL
24
STRAIGHT
39 PERIPHERAL FACE, BACK HUB PROTRUDING
1.581 INCH 01-398-3473 GEAR,BEVEL 3020 A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL. 0JF20
0JF20 M406
92-AV101-N-SYM-72 MATERIAL
TEETH QUANTITY
TEETH TYPE
STYLE DESIGNATOR
NOMINAL OVERALL LENGTH; STEEL OVERALL
24
STRAIGHT
39 PERIPHERAL FACE, BACK HUB PROTRUDING
1.581 INCH 01-398-3474 VALVE,GATE 4820 A valve having a flat or tapered disk (gate) which moves transversely to the axis of flow by rotating or sliding movements of the stem to open or close the orifice. It may also contain an oval or rectangular shaped slide which may be manually, motor, or pressure operated through the means of an arm or arm assembly. The body flange may be designed to accommodate tube type connectors. It may or may not contain thermal relief features. Includes valve (gate) specifically designed for the control of fluid systems in aircraft or missiles. 21368 0405NI 2.50IN MATERIAL
VALVE SIZE
VALVE OPERATION METHOD
INLET RELATIONSHIP WITH OUTLET
CO IRON BODY
STEEL COMP 316 SEAT
STEEL COMP 316 STEM
NICKEL ALLOY DISK
2.500 IN 01-398-3475 HEAD,SPRINKLER,FIRE PROTECTION 4210 An automatic device specifically designed for the discharge of water, chemical powder/foam, or vaporizing liquid in a sprayed, fogged, or directionalized patterns. Normally used in fixed fire protection systems. 54578 49-981-1-175 MATERIAL
HEAD TYPE
SPRAY ANGLE PATTERN
CONNECTION THREAD SIZE
CONNECTION THR BRONZE
SPRAY
180.0 DEGREES
1/2IN.-14
NPT
EXTERNAL
WATER
NOT INCLUDED 01-398-3476 GEAR,INTERNAL 3020 A gear with teeth formed on the inner surface of a cylinder or cone. 0JF20
0JF20
0JF20 M610
M610-SYM 65
92-AV101-N SHT 13 ITEM 103 NOMINAL OVERALL LENGTH
NOMINAL OUTSIDE DIAMETER
BORE NOMINAL DIAMETER 2.562 INCHES
5.125 INCHES
4.250 INCHES BOTH ENDS 01-398-3477 4820-00-483-0697 4820 01-398-3478 NUT,UNION 4730 An internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING. 15187
01343
75954 03890.203.130
03890.206.130
03890.206.130 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
III END ITEM IDENTIFICATION COPPER ALLOY 922 OVERALL
ASTMB61 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SAF 01-398-3479 GEAR OPERATOR,VALVE 4820 A hand controlled device maneuvered by a gear designed to open and close the flow control device. May include open and close position indicator. Excludes GEAR ASSEMBLY, SPEED DECREASER
GEARBOX ACCESSORY DRIVE, TURBINE ENGINE
and GEARCASE-MOTOR. 04457
54752
54752 KR610-90V-12BR
KR610-90V-12BR
KR640402 ASSY KR610-90V-12BR VALVE TYPE FOR WHICH DESIGNED BUTTERFLY 01-398-3480 STRAINER ELEMENT,SEDIMENT 4730 A replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID. 73124
73124
73134
73124 ST051015CFM001 PC. NO. 2
ST051015CFM005
ST051015CFM005 PC NO 2
ST262MGXXSPEC 01-398-3481 VALVE,GLOBE 4820 A valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK
COCK, SHUTOFF, SCREW STEM
and VALVE, SOLENOID. 54716 6GN82-2-WM P/L3072 MATERIAL
STYLE DESIGNATOR
OFFSET DISTANCE
FLOW CONTROL DEVICE
MEDIA FOR WHIC COPPER ALLOY BODY
PLASTIC POLYAMIDE FLOW CONTROL DEVICE
NICKEL ALLOY SEAT
STE 01-398-3482 COUPLING,PIPE 4730 A straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE. 96046 2395 MATERIAL
MEDIA FOR WHICH DESIGNED
NOMINAL PIPE SIZE ACCOMMODATED
III END ITEM IRON CAST OVERALL
WATER SINGLE RESPONSE
0.125 INCHES ALL ENDS
PUMP CIRCULATIN 01-398-3484 STRAINER,SEDIMENT 4730 A strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line. 73124
73124 ST050060BFM005 11/32IN PERF
ST050060BMF005 01-398-3485 COUPLING,PIPE 4730 A straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE. 0JM37 1004-66 NOMINAL PIPE SIZE ACCOMMODATED
III END ITEM IDENTIFICATION 6.000 INCHES ALL ENDS
USED ON SEWER LINES 01-398-3488 VALVE,CHECK 4820 A valve permitting flow in one direction only. It does not have a stem, except when equipped with a lever and weight and has no pressure adjustment. It may be inline or cartridge (manifold) design. 96822 04403 FLOW CONTROL DEVICE
MEDIA FOR WHICH DESIGNED
END ITEM IDENTIFICATION POPPET
AIR SINGLE RESPONSE
KELCO SAND BLAST MACHINE MODEL K130 01-398-3489 HOSE ASSEMBLY,NONMETALLIC 4720 A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT
and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. 09605 05550918 INSIDE SURFACE CONDITION
CROSS-SECTIONAL SHAPE STYLE SMOOTH
1 ROUND 01-398-3491 MODIFICATION KIT,GUN,WEAPON 1005 An item or collective items employed to modify weap0ns. 19204 11838841 01-398-3493 KEYBOARD,DATA ENTRY 7025 A device for data input by key depression which causes the generation of the selected character, numeral or the like. 5U421
56421
5U421 CRK-201
CRK-201
913-0008-008 III END ITEM IDENTIFICATION WORKSTATION, RUG 01-398-3494 CONTROL,COMPUTER 7035 A control which is an essential part of the central processing unit of a computer. It controls the other basic hardware units in such a manner that all operations are conducted in the correct time and logic sequence. It also prevents the introduction of a new task prior to completion of the task in process. The control comprises an instruction counter, an instruction and index register and comparator. 15476 DSRVW-AA/CGF III END ITEM IDENTIFICATION WORKSTATION RUG 01-398-3495 PRINTER,AUTOMATIC DATA PROCESSING 7025 A high-capacity hard copy printer specifically designed for data processing systems. Includes electrostatic and Laser-operated printers. 01526 3404 III END ITEM IDENTIFICATION WORKSTATION RUG 01-398-3496 COMPUTER,DIGITAL 7021 A computer which processes information represented by combinations of discrete or discontinuous data. It is a computer for performing sequences of arithmetic and logical operations, not only on external data but also on its own internally stored instructions, in contrast to a continuous data, analog computer. It may be designed for specific and/or combination operation, such as asynchronous, automatic, fixed program, and the like. May include handheld computer. Excludes peripheral hardware. 54418 485400-348 III END ITEM IDENTIFICATION FAAD 01-398-3497 SCREW ASSEMBLY,PANEL 5305 A headed, threaded fastening device over which may be assembled
(1) a stand-off
(2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw
a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded. 80063 A3170885 III END ITEM IDENTIFICATION AN/PAS-13(V)1 01-398-3498 SWITCH,LOCK 5930 A switch which is externally actuated by a key designed to be inserted into a switch, or actuated by a predetermined combination dial setting(s). Excludes SWITCH, LOCK, IGNITION. 00779
95146 164J2B-22
164J2B-22 NONPILE-UP CONTACT ARRANGEMENT
MAXIMUM VOLTAGE RATING IN VOLTS
CONTACT LOAD CU 1 POLE, DOUBLE THROW, BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT
20.0 DC AND; 01-398-3499 SWITCH,ROTARY 5930 A switch actuated by a definite angular rotation of the switch shaft about its axis. For items having rated actuation travel and pressure characteristics, see SWITCH, SENSITIVE. Excludes RELAY, ROTARY
SWITCH, STEPPING
and SWITCH, TELEPHONE (as modified). 8A246
59951 CD002268
GD-SW023A 01-398-3500 SWITCH,TOGGLE 5930 A switch which is externally actuated by a lever and whose contacts open and close with an instantaneous (snap) action
includes items having one or more momentary positions. Includes switches (snap action) which use mercury to bridge contacts, and assemblages of complete switches (snap action) having common actuators. Excludes SWITCH, LEVER
SWITCH, ROTARY
SWITCH, KNIFE
SWITCH, SENSITIVE
and SWITCH, BOX. 8A246
50804 CD002217-09
C5550AL 01-398-3501 SWITCH,TOGGLE 5930 A switch which is externally actuated by a lever and whose contacts open and close with an instantaneous (snap) action
includes items having one or more momentary positions. Includes switches (snap action) which use mercury to bridge contacts, and assemblages of complete switches (snap action) having common actuators. Excludes SWITCH, LEVER
SWITCH, ROTARY
SWITCH, KNIFE
SWITCH, SENSITIVE
and SWITCH, BOX. 8A246
3J688 CD002211-30
13188-001 01-398-3502 CAPACITOR,FIXED,CERAMIC DIELECTRIC 5910 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated. 037Z3 87047-26 01-398-3503 CAPACITOR,FIXED,CERAMIC DIELECTRIC 5910 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated. 037Z3 87047-31 01-398-3504 SHIELDING GASKET,ELECTRONIC 5999 A shaped metallic item designed to increase the effectiveness of radio frequency/electromagnetic interference, or a nonmetallic item containing a wire mesh, metal, or other electrically conductive particles designed to provide environmental sealing and radio frequency/electromagnetic interference shielding. For bulk items see WIRE MESH, KNITTED or GASKETING MATERIAL, CONDUCTIVE. 60050 ESS-06 MATERIAL
CROSS-SECTIONAL SHAPE STYLE
CROSS SECTION OUTSIDE DIAMETER
SPECIAL F COPPER ALLOY EMI/RFI CONDUCTOR
F72 EMI
0.094 INCHES NOMINAL
THIS IS A HIGH HU 01-398-3505 ELECTRON TUBE 5960 An inclosure, including two or more electrodes, in which a flow of electrons may occur through a vacuum or a contained gas. The electronic conduction takes place either by means of electrons emitted from a cathode or by ionization of the contained gas. Includes phototubes (photoemissive type only), Geiger-Mueller tubes, traveling wave tubes, cathode ray tubes and microwave tubes (Klystron, magnetron, or the like). Excludes items whose primary purpose is to produce light energy. Also excludes PHOTOELECTRIC CELL
and SEMICONDUCTOR DEVICE (as modified). 0CDN3 6119-0108-03 IDENTIFYING NUMBER
TUBE TYPE 6119-0108-03 REFERENCE NO.
CATHODE RAY 01-398-3506 LIGHT EMITTING DIODE 5980 A two electrode, solid state, optoelectronic device that emits visible or infrared radiant energy when electrically energized. May or may not include mounting hardware and/or heat sink. Excludes LAMP, CARTRIDGE
and LIGHT, INDICATOR. For solid state devices which are responsive to infrared or radiant energy, see SEMICONDUCTOR DEVICE (1), PHOTO. 58960
65507 10022628-101
10022628-101 III END ITEM IDENTIFICATION HG180U AIR DATA COMPUTER 01-398-3507 COIL,RADIO FREQUENCY 5950 An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors
however, excludes FILTER (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see TRANSFORMER, RADIO FREQUENCY. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC. 96906
96906
A1997 MIL-C-15305
MS75083-08
400-512-053 TERMINAL TYPE AND QUANTITY
RATING METHOD
WINDING OPERATING CURRENT
DC RESISTA 2 WIRE LEAD
ELECTRICAL SINGLE COMPONENT SINGLE WINDING
700.0 MILLIAMPERES DC N 01-398-3508 ADAPTER,CONNECTOR 5935 An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE
ADAPTER, LAMPHOLDER TO CONNECTOR
ADAPTER (1), CABLE CLAMP TO CONNECTOR
and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT. 1LQK8
28480 85052-60004
85052-60004 BODY STYLE
MATING END QUANTITY
III END ITEM IDENTIFICATION 28N STRAIGHT SHAPE
1
MX PEACEKEEPER MISSLE SUPPORT EQUIPMENT. 01-398-3509 ADAPTER,CONNECTOR 5935 An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE
ADAPTER, LAMPHOLDER TO CONNECTOR
ADAPTER (1), CABLE CLAMP TO CONNECTOR
and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT. 1LQK8
28480 85052-60003
85052-60003 BODY STYLE
MATING END QUANTITY
III END ITEM IDENTIFICATION 28N STRAIGHT SHAPE
1
MX PEACEKEEPER MISSLE SUPPORT EQUIPMENT. 01-398-3511 TOUCHSCREEN,DATA ENTRY 7025 A device which uses a pressure-sensitive panel to input information to an electronic computer system and/or control the operation of a system. It is mounted on the face of a display unit such as a cathode ray tube. It may include mounting hardware. 0A1V7 13-132X-01 01-398-3513 DETECTOR,RADIO FREQUENCY 5895 An electronic device which demodulates radio frequency energy and may also provide a direct current control potential. 01341
03538
56232 R6239
1211755-201
1211755-201 01-398-3514 ELECTRON TUBE 5960 An inclosure, including two or more electrodes, in which a flow of electrons may occur through a vacuum or a contained gas. The electronic conduction takes place either by means of electrons emitted from a cathode or by ionization of the contained gas. Includes phototubes (photoemissive type only), Geiger-Mueller tubes, traveling wave tubes, cathode ray tubes and microwave tubes (Klystron, magnetron, or the like). Excludes items whose primary purpose is to produce light energy. Also excludes PHOTOELECTRIC CELL
and SEMICONDUCTOR DEVICE (as modified). 6P860
03956
03956
03956 BS894
S0555-209019820
1811127-102
20901982 IDENTIFYING NUMBER
TUBE TYPE 1811127-102 REFERENCE NO.
TRANSMIT-RECEIVE 01-398-3515 FUSEHOLDER,BLOCK 5920 A fuseholder in which the fuseholder stud and/or clips and insulation are mounted on a flat base. Excludes FUSEHOLDER, RECEPTACLE. 56302
56365 9999SFR4
9999SFR4 01-398-3516 AMPLIFIER,DIRECT CURRENT 5996 An electronic device whose input signals control power from a source independent of the input signals and delivers output signals of greater amplitude with respect to current and/or voltage. The output signals characteristics are uniformly related to the input signals. It is used for small variations in direct current electrical impulses, and generally employs direct coupling between stages through resistors. 88907 814295A1 CIRCUIT CONSTRUCTION TYPE
OPERATING CONTROL METHOD
CONTROL TYPE
AVERAGE LIFE SOLID STATE
AUTOMATIC
LOCAL
NOT RATED
ENCASED
MECHANICAL
1 RECTANGULAR OR 01-398-3517 GUARD,SWITCH 5930 A framework fabricated of rigid material designed to protect a switch against external damage and/or prevent inadvertent throwing of the switch. Excludes switch locking devices. 91929 AML76E10T01P 01-398-3518 5980-01-238-7903 5980 01-398-3520 BACKSHELL,ELECTRICAL CONNECTOR 5935 An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions. 57958
06324 C5108642-7
380HS019M2312TA3 01-398-3521 TRANSFORMER,RADIO FREQUENCY 5950 An item having either a single tapped winding (autotransformer type), or two or more windings designed to furnish inductive reactance and/or transfer electrical energy in circuits by means of a magnetic field. It is so designed that its entire intended range of operations is above 20 Kilohertz (Kilocycles). The minimum value may extend into the audio frequency range (below 20 Kilohertz). It may include integral capacitors, coils, resistors, and adjustable tuning cores. For items having only two active terminals see COIL, RADIO FREQUENCY. Includes types having windings which may be moved with respect to each other. Excludes TRANSFORMER, DISCRIMINATOR. 50027 1505-1176 TERMINAL TYPE AND QUANTITY
SPECIAL FEATURES
CRITICALITY CODE JUSTIFICATION
II 6 PIN
WEAPON SYSTEM ESSENTIAL
FEAT
HELICOPTER, CARRIER BASED ASW
SEASPRITE H 01-398-3522 COIL,RADIO FREQUENCY 5950 An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors
however, excludes FILTER (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see TRANSFORMER, RADIO FREQUENCY. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC. 50027 1505-1955 TERMINAL TYPE AND QUANTITY
RATING METHOD
TURN QUANTITY
INCLOSURE TYPE
RELIAB 3 WIRE LEAD
WINDING TURNS SINGLE COMPONENT SINGLE WINDING
15 SINGLE COMPONENT 01-398-3523 COVER,FUSE 5920 An item designed to fully or partially enclose a fuse to prevent contact with foreign obstructions. 71607 FEA1D3 01-398-3524 FILTER,BAND PASS 5915 An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes a single inductance, or a single capacitance, or a single resistance. See COIL (as modified)
REACTOR
CAPACITOR (as modified)
and RESISTOR (as modified). 23042
04423
50027 X8BD155/38-1-0.5-50-QQR
1505-1250-001
1505-1250-001 01-398-3525 SEMICONDUCTOR DEVICE,DIODE 5961 A two electrode semiconductor device having an asymmetrical voltage - current characteristic. May or may not include mounting hardware and/or heatsink. Excludes LIGHT EMITTING DIODE and SEMICONDUCTOR DEVICE,PHOTO. For items containing material such as selenium and copper oxide, see RECIFIER, METALLIC. 50101
50027 GC-41276-38
9999-4492-001 SEMICONDUCTOR MATERIAL
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC
INCLOSURE MA SILICON
70.0 MAXIMUM REVERSE VOLTAGE, DC
METAL
PRESS FIT
2 PIN
0.624 INCHES 01-398-3526 RESISTOR,FIXED,FILM 5905 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form
or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors. 81349
81349 MIL-R-55342/2
M55342K02B681DR ELECTRICAL RESISTANCE
RESISTANCE TOLERANCE IN PERCENT
POWER DISSIPATION RATING 681.000 OHMS
-1.000 TO 1.000
0.050 FREE AIR
70.0
150.0
UNINCLOSED
198 TERM 01-398-3527 TRANSFORMER,POWER 5950 A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see TRANSFORMER (1), POWER, AUTOTRANSFORMER. Excludes TRANSFORMER (1), PULSE. 50027 1639-1330 TERMINAL TYPE AND QUANTITY
INPUT-OUTPUT PHASE RELATIONSHIP
INCLOSURE TYPE
REL 6 PIN
SINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT
FULLY INCLOSED
NOT ESTABL 01-398-3528 TRANSFORMER,CURRENT 5950 An item consisting of one or more windings, designed to be placed near or connected in series with an alternating current power line to measure the current passing through the line by means of a meter
or to control the current passing through the line by means of a control device. Excludes TRANSFORMER, POWER, CURRENT REGULATING. 50027 1639-1331-002 TERMINAL TYPE AND QUANTITY
(NON-CORE DATA) WINDING TAP LOCATION
INPUT-OUTPUT P 7 PIN
CENTER TAP SINGLE COMPONENT SINGLE SECONDARY
SINGLE PHASE TO SINGLE PHAS 01-398-3529 TRANSFORMER,CURRENT 5950 An item consisting of one or more windings, designed to be placed near or connected in series with an alternating current power line to measure the current passing through the line by means of a meter
or to control the current passing through the line by means of a control device. Excludes TRANSFORMER, POWER, CURRENT REGULATING. 50027 1639-1331-001 TERMINAL TYPE AND QUANTITY
(NON-CORE DATA) WINDING TAP LOCATION
INPUT-OUTPUT P 5 PIN
CENTER TAP SINGLE COMPONENT SINGLE SECONDARY
SINGLE PHASE TO SINGLE PHAS 01-398-3530 HEAT EXCHANGER,AIR TO AIR,AIRCRAFT 1660 A heat transfer device designed to lower compressed air temperature to an acceptable level by passing it through tubes and flowing ducted ram air over the tubes, heat of the compressed air is transferred to the ram air reducing the temperature. Consists of a sheet metal housing with ram air connection(s) with or without ducts, a tubular type core, inlet and outlet ports. May contain a shutoff valve. Normally used in aircraft air conditioning and/or air induction systems. 11245 5310G10 01-398-3531 TRANSFORMER,POWER 5950 A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see TRANSFORMER (1), POWER, AUTOTRANSFORMER. Excludes TRANSFORMER (1), PULSE. 50027 1639-1332 TERMINAL TYPE AND QUANTITY
WINDING OPERATING VOLTAGE
INPUT-OUTPUT PHASE RELATI 11 PIN
5.00 AC VOLTS NOMINAL SINGLE COMPONENT 1ST SECONDARY
15.00 AC VOLTS NOM 01-398-3532 MICROCIRCUIT,MEMORY 5962 A circuit designed to store information and/or coded instructions for later use. Item has pins or other connections to install in a computing device. Does not include magnetic drums, tapes, punched cards or the like. For items that have portable type connectors see MEMORY, PORTABLE, SOLID STATE. 67268
67268
16236 84036
8403609XA
8403609XX OUTPUT LOGIC FORM
(NON-CORE DATA) BIT QUANTITY
VOLTAGE RATING AND TYPE PER CHA COMPLEMENTARY-METAL OXIDE-SEMICONDUCTOR LOGIC
16384
-0.3 VOLTS MINIMUM POWER S 01-398-3533 CAPACITOR,FIXED,CERAMIC DIELECTRIC 5910 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated. 33967 1008-0014 01-398-3534 CAPACITOR,FIXED,CERAMIC DIELECTRIC 5910 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated. 2B487
3B150
49956 C00063
C00063
C00063 01-398-3536 CAPACITOR,FIXED,CERAMIC DIELECTRIC 5910 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated. 33967 1008-0032 01-398-3537 CAPACITOR,FIXED,CERAMIC DIELECTRIC 5910 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated. 33967 1008-0036 01-398-3538 CAPACITOR,FIXED,CERAMIC DIELECTRIC 5910 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated. 33967 1008-0021 01-398-3539 CAPACITOR,FIXED,CERAMIC DIELECTRIC 5910 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated. 33967 1008-0050 01-398-3540 CAPACITOR,FIXED,CERAMIC DIELECTRIC 5910 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated. 33967 1008-0065 01-398-3541 CAPACITOR,FIXED,CERAMIC DIELECTRIC 5910 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated. 33967 1008-0049 01-398-3542 7025-01-377-8512 7025 01-398-3543 RECEIVER-TRANSMITTER,LIGHT SIGNAL 6030 A signal component capable of performing the function of a RECEIVER, LIGHT SIGNAL and a TRANSMITTER, LIGHT SIGNAL. 0T156
0T156
0T156
0T156 AT-F1500FT-PNP
AT-F1700FT-PLUS
AT-1700FT
AT-1700FTPLUS 01-398-3544 SWITCH ASSEMBLY 5930 Two or more complete switches mounted on each other or having a common mounting the major function of which is to hold the switches. Each switch, as a separable item, must be capable of functioning in accordance with its own name. Excludes items consisting of individually separable switches which are physically interlocked (e.g., one button returns when the other is pushed), which have a common actuator, or are electrically connected. See also SWITCH, PUSH. 43689
43689
53711 D4801-987 ASSY 4
G65N-M5123-31097L1
401-5281296 ASSY 4 01-398-3545 SWITCH ASSEMBLY 5930 Two or more complete switches mounted on each other or having a common mounting the major function of which is to hold the switches. Each switch, as a separable item, must be capable of functioning in accordance with its own name. Excludes items consisting of individually separable switches which are physically interlocked (e.g., one button returns when the other is pushed), which have a common actuator, or are electrically connected. See also SWITCH, PUSH. 43689
43689
53711 D4801-987 ASSY 7
G65N-M5123-31100L1
401-5281296 ASSY 7 01-398-3546 RECTIFIER,SEMICONDUCTOR DEVICE,UNITIZED 5961 Two or more diode semiconductor devices designed to function as a unit in changing alternating current to direct current. The diode devices are internally connected in series, and are permanently cased, encapsulated, potted, or molded together to form an inseparable unit. These units may be designed as either half-wave or full-wave rectifiers and may be mounted to form either single phase or three phase bridges. For interconnected items arranged in stack(s), see RECTIFIER, SEMICONDUCTOR DEVICE. For items fabricated in the form of a monolithic or thin film structure that perform the function of a circuit, see INTEGRATED CIRCUIT (as modified). Excludes SEMICONDUCTOR DEVICES, UNITIZED
SEMICONDUCTOR DEVICE ASSEMBLY
and RECTIFIER NETWORK, UNITIZED. 12954
80103
51298 D2149
FBL-00-210
HES504 MATERIAL
ABSOLUTE MAXIMUM VOLTAGE RATING IN VOLTS PER CHARACTERISTIC
ABSOLUTE SILICON
100.0 REPETITIVE PEAK REVERSE VOLTAGE
15.00 AMPERES FORWARD CURRENT, A 01-398-3547 INSULATOR,THERMAL 5999 INC 39983 CANCELLED/REPLACED BY INC 39324, FIIG A03600, APP-KEY B , ON 030194 INC 39983 CANCELLED ON 011494 An item which is specifically designed to prevent the unwanted transmission of heat to an electrical or electronic component. It is constructed of a thermally rated material and is usually thin in comparison to its length and width. Excludes HEAT SINK (as modified). 05869
53711 6510493
6510493 01-398-3548 RECTIFIER,SEMICONDUCTOR DEVICE 5961 Two or more interconnected SEMICONDUCTOR DEVICE (1), DIODE arranged in stack(s) for use in power supplies to change alternating current to direct current. For items containing material such as selenium or copper oxide, see RECTIFIER, METALLIC. 05825
53711 5905709
5905709 MATERIAL
MOUNTING METHOD
TERMINAL TYPE AND QUANTITY
III END ITEM IDENTIFICATI SILICON
UNTHREADED HOLE
5 TAB, SOLDER LUG AND
2 TERMINAL LUG
MARK 48 TORPEDO 01-398-3549 CONNECTOR,PLUG,ELECTRICAL 5935 An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE
JACK, TIP
PLUG, TELEPHONE
PLUG TIP
INSERT, ELECTRICAL CONNECTOR
CONNECTOR BODY (as modified)
and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL
WIRING HARNESS (as modified)
and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR. 81349
81349 MIL-C-28748/14
M28748/14C10F1A BODY STYLE
OVERALL LENGTH
OVERALL HEIGHT
OVERALL WIDTH
MATING END QUANTITY; 18A HOOD, TOP OPENING W/CLAMP
0.880 INCHES NOMINAL
1.680 INCHES NOMINAL
0.280 01-398-3550 CONNECTOR,RECEPTACLE,ELECTRICAL 5935 An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER
JACK, TELEPHONE
JACK, TIP
INSERT ELECTRICAL CONNECTOR
INSERT MODULE, ELECTRICAL CONNECTOR
CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. 08718
71468 153416-3050
153416-3050 BODY STYLE
MATING END QUANTITY
CONTACT POSITION ARRANGEMENT STYLE
INCLUDED CO 14G STRAIGHT SHAPE, INTERNAL COUPLING
1
ABDB NONSTD SINGLE MATING END
1 SINGL 01-398-3551 OSCILLATOR,CRYSTAL CONTROLLED 5955 An oscillator whose operating frequency(ies) is controlled by a CRYSTAL UNIT, QUARTZ. For an oscillator controlled by a device other than a crystal, see OSCILLATOR (1), NONCRYSTAL CONTROLLED. See also GENERATOR, SIGNAL
and CALIBRATOR, FREQUENCY. Excludes FREQUENCY SUPPLY, TELEPHONE CARRIER
RESONATOR, TUNING FORK
and OSCILLATOR, PULSE DELAY. 81349
81349
94117 MIL-O-55310/16
M55310/16-B44A27M77750
154112P27 CIRCUIT CONSTRUCTION TYPE
FREQUENCY PER CHANNEL
OPERATING CONTROL METHOD
CONT SOLID STATE
27.7775 MEGAHERTZ NOMINAL OPERATING CHANNEL
AUTOMATIC
REMOTE
NOT 01-398-3552 CAPACITOR,FIXED,CERAMIC DIELECTRIC 5910 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated. 04222
04222
94117 12102C103KBT050
12102C103K9T2A
130102P1 CAPACITANCE VALUE PER SECTION
TOLERANCE RANGE PER SECTION
NONDERATED CONTINUOU 10000.000 PICOFARADS SINGLE SECTION
-10.00 TO 10.00 PERCENT SINGLE SECTION
200 01-398-3553 CAPACITOR,FIXED,METALLIZED,PAPER-PLASTIC DIELECTRI 5910 A capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. It may be a single unit or consist of two or more units which cannot be separated. 37942
94117 PVC2047
140026P5 CAPACITANCE VALUE PER SECTION
TOLERANCE RANGE PER SECTION
NONDERATED CONTINUOU 0.470 MICROFARADS SINGLE SECTION
-10.00 TO 10.00 PERCENT SINGLE SECTION
100.0 01-398-3554 BUTTON,SEWING HOLE 8315 A button with two or more holes through face for attaching to a material by sewing with threads. Excludes BUTTON, STAPLE and BUTTON, TACK. 81348 V-B-871 MATERIAL
HEAD DIAMETER IN LINES
SPECIAL FEATURES
NONDEFINITIVE SPEC/STD DATA; PLASTIC MELAMINE
30
GREEN, US ARMY, 483
CABLE NO. 62016
DULL FINISH
II TYPE 01-398-3555 FASTENER TAPE,PILE 8315 A tape with an uncut pile forming loops which engage the hooks of a hook fastener tape to form a fastening device. It is a component of a hook and pile fastener tape. 58536
81349 A-A-55126
MIL-F-21840 FIBER MATERIAL
WIDTH
SPECIAL FEATURES
NONDEFINITIVE SPEC/STD DATA
DEPARTURE NYLON
2.000 INCHES
TAN, US ARMY, 380
1 CLASS
AS MODIFIED BY COLOR
58536
A- 01-398-3556 HANDLE,BOW 5340 An item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. It may be with or without a mounting plate. Includes sash lifts of the bow type. Excludes HANDLE DOOR. 06540
1YGB8
12436 13256-A-1032-2
13256-A-1032-2
7010510 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT ALUMINUM ALLOY 6061 BALL
ALUMINUM ALLOY 6061 OVERALL
QQ-A-225/8 FED SPEC SINGL 01-398-3557 BUSHING,SLEEVE 3120 A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE
BUSHING, TAPERED
SPACER, SLEEVE
INSULATOR, BUSHING
and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. 72314 1340DD1015-001 MATERIAL
SURFACE TREATMENT
STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAM STEEL COMP 303 OVERALL
PASSIVATE OVERALL
17C SOLID
0.1450 INCHES NOMINAL
0.2 01-398-3558 BEARING,BALL,ANNULAR 3110 A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME. 40920
83086
59364 H409
SBMDRI-1812QQ5SD612FA1P1216LY48E
358976-1 01-398-3559 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 63097 2-307-008-808-15 01-398-3560 SHIM 5365 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE
WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED
SHIM STOCK ASSORTMENT, GASKET
and BEARING, WASHER, THRUST. 96214 3114216-1 01-398-3562 PLATE,MOUNTING 5340 A metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies. 98897
98897 3341096
3341096-7 SHAPE
LENGTH
WIDTH
MOUNTING HOLE QUANTITY
SPECIAL FEATURES RECTANGULAR
2.600 INCHES NOMINAL
5.814 INCHES NOMINAL
4 ALL HOLES
CONSIST OF 01-398-3563 STUD,CONTINUOUS THREAD 5307 A headless fastener not exceeding 12 inches (304.8 mm) in length having an external thread of one nominal diameter running from end to end. See also ROD, CONTINUOUS THREAD. 17472 6060-0040-03 SURFACE TREATMENT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
OVERALL LENGTH PASSIVATE OVERALL
QQ-P-35, TYPE II FED SPEC SINGLE TREATMENT RESPONSE OVERALL; 01-398-3564 DOOR,ACCESS,WEAPON SYSTEM 5342 A rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, GENERAL PURPOSE. 05172
1W025 1870-0075
1870-0075 PERIPHERAL SHAPE STYLE
WIDTH
LENGTH
CROSS-SECTIONAL SHAPE STYLE
BODY THICKNE 1 RECTANGLE, NO HOLES
17.680 INCHES NOMINAL
16.000 INCHES NOMINAL
26 FLAT
3. 01-398-3565 SCREW,MACHINE 5305 An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS
BOLT, EXTERNALLY RELIEVED BODY
SCREW, EXTERNALLY RELIEVED BODY
and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT
BOLT, MACHINE
BOLT, INTERNAL WRENCHING
and SCREW, CAP SOCKET HEAD. 80205
81349
80205 MIL-S-7839
MIL-S-7839
NAS603-2 THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNJF
0.190 INCHES
32
3A
RIGHT-HAND
0.063 INCHES MINIMUM AND
0.125 INCHES M 01-398-3567 SCREW,CAP,SOCKET HEAD 5305 An externally threaded fastener whose threaded portion is of one nominal diameter. The head has an internal socket or multiple spline for use with an inserted driver. A locking feature may be incorporated in the design of the head or threads. Excludes items with bevel (conical) heads. See BOLT, INTERNAL WRENCHING. Excludes SCREW, SHOULDER
and SCREW, MACHINE. 59364 3180057-1 THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNF
0.190 INCHES
32
3A
RIGHT-HAND
0.450 INCHES MINIMUM AND
0.470 INCHES MA 01-398-3569 PIN,SHOULDER,HEADLESS 5315 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end. 26512 C99S12255-11 STYLE DESIGNATOR
SHANK LENGTH
SHANK DIAMETER
OVERALL LENGTH
FIRST END STYLE; J163 SHOULDER
1.250 INCHES NOMINAL
0.995 INCHES MINIMUM AND
0.998 INCHES MAXI 01-398-3570 INSERT,PANEL FASTENER 5325 An insert which must have a hole that may be internally threaded with a flange on one end. It may have an undercut on the end opposite the flange to provide a shoulder to allow for mating with another insert. Pre-assembled items will consist of an expansion sleeve and a body which may be flared. Internally threaded items may have a self-locking feature. Excludes INSERT, SCREW THREAD. 80205 NAS1836C3-10P MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT STEEL COMP 303 OVERALL
ASTM A482 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CAD 01-398-3571 BOLT,CLOSE TOLERANCE 5306 An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. 80205 NAS6706-21 THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNJF
0.375 INCHES
24
3A
RIGHT-HAND
0.578 INCHES NOMINAL
1.875 INCHES MINIM 01-398-3572 BOLT,MACHINE 5306 An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. 26512
94189 GB511GY1
15253 THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNF
0.500 INCHES
20
3A
RIGHT-HAND
0.718 INCHES NOMINAL
STEEL OVERALL
ZINC 01-398-3573 BOLT,SHOULDER 5306 An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW. 80205 NAS6705U11X THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNJF
0.3125 INCHES
24
3A
RIGHT-HAND
0.469 INCHES NOMINAL
1.142 INCHES MINI 01-398-3574 BOLT,CLOSE TOLERANCE 5306 An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. 80205 NAS6705P8 THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNJF
0.3125 INCHES
24
3A
RIGHT-HAND
0.469 INCHES NOMINAL
0.954 INCHES MINI 01-398-3575 SETSCREW 5305 An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. A locking feature may be incorporated in the design of the head or threads. 29372
58794
05395 CA21063-10-10-15
FTD7135-10-10-15
S10244-10-10-15 THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNF
0.190 INCHES
32
3A
RIGHT-HAND
0.625 INCHES NOMINAL
0.937 INCHES NOMINA 01-398-3576 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 59782 14-202-006-00 MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S STEEL CORROSION RESISTING OVERALL
0.141 INCHES MINIMUM
1 ROUND
0.236 INCHES M 01-398-3577 SCREW,MACHINE 5305 An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS
BOLT, EXTERNALLY RELIEVED BODY
SCREW, EXTERNALLY RELIEVED BODY
and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT
BOLT, MACHINE
BOLT, INTERNAL WRENCHING
and SCREW, CAP SOCKET HEAD. 24617 159962 THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNC
0.190 INCHES
24
2A
RIGHT-HAND
1.167 INCHES MINIMUM AND
1.250 INCHES MA 01-398-3578 SCREW,CAP,HEXAGON HEAD 5305 An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE
BOLT, EXTERNALLY RELIEVED BODY
BOLT, INTERNAL WRENCHING
and SCREW, CAP, SOCKET HEAD. 24617 9421948 THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNF
0.312 INCHES
24
2A
RIGHT-HAND
0.875 INCHES MINIMUM AND
1.153 INCHES MA 01-398-3579 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 14776
14776 200-1009
200-1009-01 01-398-3580 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 96266 WA-121905 STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAMETER
BODY INSIDE DIAMETER
C 17C SOLID
1.2500 INCHES NOMINAL
1.1870 INCHES NOMINAL
0.7500 INCHES NOMINAL; 01-398-3581 SCREW,TAPPING 5305 A hardened externally threaded fastener whose thread extends to the bearing surface of the head. The thread may be fluted or otherwise designed to cut or form its own mating thread. Excludes SCREW, ASSEMBLED WASHER. 73439
45152 B71-04768-002
1594900 NONMACHINE THREAD STYLE
NONMACHINE NOMINAL THREAD DIAMETER
FASTENER LENGTH
MA A13 GIMLET POINT
0.190 INCHES
0.719 INCHES MINIMUM AND
0.781 INCHES MAXIMUM; 01-398-3582 BOLT,MACHINE 5306 An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. 26233
0FKM1
0KDM1
57733 M60FS616-14B
323443
323443
323443 01-398-3583 BOLT,MACHINE 5306 An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. 0FKM1
0KFM1
57733 323487
323487
323487 01-398-3584 SCREW,MACHINE 5305 An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS
BOLT, EXTERNALLY RELIEVED BODY
SCREW, EXTERNALLY RELIEVED BODY
and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT
BOLT, MACHINE
BOLT, INTERNAL WRENCHING
and SCREW, CAP SOCKET HEAD. 80205 NAS1191E04T7B THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNJC
0.112 INCHES
40
3A
RIGHT-HAND
0.388 INCHES MINIMUM AND
0.438 INCHES M 01-398-3585 SPACER,PLATE 5365 A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET
INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. 98897 3337043-19 MATERIAL
OVERALL THICKNESS
STYLE DESIGNATOR
OVERALL LENGTH
OVERALL WIDTH ALUMINUM ALLOY 7075
0.080 INCHES NOMINAL
A24 RECTANGULAR
13.000 INCHES NOMINA 01-398-3586 SPACER,TAPERED 5365 A metallic or nonmetallic item of various peripheral shapes, having a solid angular cross-section. It is designed to maintain a predetermined distance between two surfaces. It must have only one tapered surface. For items with two tapered surfaces, see WEDGE (as modified). 98897
98897 LS12379B004-016
3337043-21 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT ALUMINUM ALLOY 6061
QQ-A-250/11, T6 FED SPEC SINGLE MATERIAL RESPONSE
CHROMATE 01-398-3587 SPACER,PLATE 5365 A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET
INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. 98897 3337043-25 MATERIAL
OVERALL THICKNESS
STYLE DESIGNATOR
OVERALL LENGTH
OVERALL WIDTH ALUMINUM ALLOY 7075
0.080 INCHES NOMINAL
A24 RECTANGULAR
6.000 INCHES NOMINAL 01-398-3588 SPACER,PLATE 5365 A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET
INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. 98897 3337043-17 MATERIAL
OVERALL THICKNESS
STYLE DESIGNATOR
OVERALL LENGTH
OVERALL WIDTH ALUMINUM ALLOY 7075
0.080 INCHES NOMINAL
A24 RECTANGULAR
24.000 INCHES NOMINA 01-398-3589 STUD,SELF-LOCKING 5307 A headed fastener threaded externally on a portion or on the full length of the shank. The head has projections on the underside or periphery, or is otherwise designed to be mechanically pressed and embedded in a metallic panel, or the like. It is securely locked in position by the displaced metal. For items that require locking rings, see BOLT, SELF-LOCKING and STUD, LOCKED IN. Excludes INSERT, SCREW THREAD. 81349
81349 MIL-S-63540/7-10T
M63540/7-10T MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
STYLE DESIGNA COPPER ALLOY 510
ASTMB159 ASSN STD SINGLE MATERIAL RESPONSE
TIN OVERALL
80 SE 01-398-3590 ANGLE,STRUCTURAL 9540 A structural shape fabricated from a ferrous or nonferrous material and resembling the letter L in cross-sectional form. The edges may have a bulb, be rounded, and the inside corner may have a fillet. 81343
97499 AMS-QQ-A-250/5
406-060-804-143 MATERIAL
FABRICATION METHOD
HEAT TREATMENT
LENGTH
BASIC SHAPE STYLE
OVERALL ALUMINUM ALLOY, QQ-A-250/5, ALLOY 2024
EXTRUDED
T-3 SOLUTION HEAT TREATED
12. 01-398-3591 ANGLE,STRUCTURAL 9540 A structural shape fabricated from a ferrous or nonferrous material and resembling the letter L in cross-sectional form. The edges may have a bulb, be rounded, and the inside corner may have a fillet. 97499 406-060-818-119 MATERIAL
FABRICATION METHOD
HEAT TREATMENT
LENGTH
BASIC SHAPE STYLE
OVERALL ALUMINUM ALLOY, QQ-A-250/5, ALLOY 2024
EXTRUDED
T-3 SOLUTION HEAT TREATED
12. 01-398-3592 BUTTON,PLUG 5340 An item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole
to cover a hole through which passes a shaft, cable, or the like
or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM. 57771 D4182 MATERIAL
STYLE DESIGNATOR
HOLE ACCOMMODATION DIAMETER STEEL
A10 STANDARD
0.1718 INCHES NOMINAL 01-398-3593 SCREW,MACHINE 5305 An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS
BOLT, EXTERNALLY RELIEVED BODY
SCREW, EXTERNALLY RELIEVED BODY
and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT
BOLT, MACHINE
BOLT, INTERNAL WRENCHING
and SCREW, CAP SOCKET HEAD. 56878 38030-94C-3B THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNRC
0.112 INCHES
40
3A
RIGHT-HAND
0.138 INCHES MINIMUM AND
0.188 INCHES M 01-398-3594 SCREW,CAP,SOCKET HEAD 5305 An externally threaded fastener whose threaded portion is of one nominal diameter. The head has an internal socket or multiple spline for use with an inserted driver. A locking feature may be incorporated in the design of the head or threads. Excludes items with bevel (conical) heads. See BOLT, INTERNAL WRENCHING. Excludes SCREW, SHOULDER
and SCREW, MACHINE. 0UNC5
0BJ33 190F50BHSCSZ
8909A929-001 NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
FASTENER LENGTH
HEAD STYLE; 0.190 INCHES
32
0.500 INCHES NOMINAL
B30 BUTTON
D5 HEXAGON 01-398-3595 O-RING 5331 A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION. 73760 42003B 01-398-3596 BOLT,SHOULDER 5306 An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW. 66144 02-1017 THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNF
0.500 INCHES
20
2A
RIGHT-HAND
1.315 INCHES NOMINAL
1.875 INCHES NOMINA 01-398-3597 STANDOFF,THREADED,SPACING 5340 A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified)
use maximum dimensions(s) for compliance. 05395
06540
1YGB8 S10021-26
9747-SS-0440-7
9747-SS-0440-7 MATERIAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
CROSS-SECTIONAL SHAPE; STEEL CORROSION RESISTING STANDOFF
QQ-Z-325C TYPE 1 CLASS 3 FED SPEC 1ST TREATM 01-398-3598 PIN,STRAIGHT,HEADLESS 5315 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM)
for items whose length exceeds twelve inches (304 MM)
see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED. 51663 RB12699 01-398-3599 CONNECTOR,FERRULE,WIRE ROPE 4030 A metallic preformed item of various shapes designed to connect the ferruled ends of wire rope. Excludes COUPLING, WIRE ROPE, QUICK DISCONNECT. 12058
80063 A3143528
A3143528 01-398-3600 BOLT,MACHINE 5306 An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. 39428
39428
39428 91271A770
91272A722
91272A770 THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNRF
0.500 INCHES
20
3A
RIGHT-HAND
1.500 INCHES NOMINAL
2.500 INCHES NOMIN 01-398-3601 STUD ASSEMBLY,TURNLOCK FASTENER 5325 A STUD, TURNLOCK FASTENER over which may be assembled an EYELET, TURNLOCK FASTENER. Stud(s) without cam slots or cam lead threads are provided with a crosspin or eared nut for locking with the mating RECEPTACLE, TURNLOCK FASTENER. May be spring loaded. For like items having a threaded fastener, see SCREW ASSEMBLY, PANEL or SCREW, PANEL FASTENER. 71286 40S47-28 MATERIAL
SURFACE TREATMENT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
TURN STEEL COMP 1050 EJECTOR SPRING
STEEL COMP 1050 EYELET
STEEL PIN
STEEL COMP 40 01-398-3602 NUT,PLAIN,HEXAGON 5310 A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) 14776 500-423-8 THREAD SERIES
NOMINAL THREAD SIZE
THREAD QUANTITY PER INCH
THREAD CLASS
THRE UNC
0.138 INCHES
32
2B
RIGHT-HAND
STEEL CORROSION RESISTING OVERALL
NOT RA 01-398-3603 PIN,STRAIGHT,HEADED 5315 A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC. 39428 92390A224 MATERIAL
STYLE DESIGNATOR
DIAMETER
UNDER HEAD LENGTH
HEAD STYLE
HOLE ARRANG STEEL COMP 302 OVERALL
L193 STRAIGHT
0.312 INCHES NOMINAL
2.250 INCHES NOMINA 01-398-3604 5310-00-929-6395 5310 01-398-3605 SHIM 5365 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE
WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED
SHIM STOCK ASSORTMENT, GASKET
and BEARING, WASHER, THRUST. 59364 3180116-10-1 01-398-3606 SHIM 5365 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE
WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED
SHIM STOCK ASSORTMENT, GASKET
and BEARING, WASHER, THRUST. 59364 3180116-1-1 01-398-3607 SHIM 5365 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE
WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED
SHIM STOCK ASSORTMENT, GASKET
and BEARING, WASHER, THRUST. 59364 3180116-10-2 01-398-3608 SHIM 5365 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE
WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED
SHIM STOCK ASSORTMENT, GASKET
and BEARING, WASHER, THRUST. 59364 3180116-10-3 01-398-3609 SHIM 5365 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE
WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED
SHIM STOCK ASSORTMENT, GASKET
and BEARING, WASHER, THRUST. 59364 3180116-1-3 01-398-3610 CLAMP,BLOCK,SECTION 5340 A single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE. 92003 2883144-101 01-398-3611 SHIM 5365 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE
WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED
SHIM STOCK ASSORTMENT, GASKET
and BEARING, WASHER, THRUST. 59364 3180116-1-2 01-398-3612 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 10236 8147041-1 MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S COPPER ALLOY 110 OVERALL
0.256 INCHES NOMINAL
1 ROUND
0.500 INCHES NOMINAL
1 01-398-3613 PIN-RIVET 5320 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. 17446
56878
60516
73197
9N513
97928
1W025 HLT623SD-10-14
HLT623SD-10-14
HLT623SD-10-14
HLT623SD-10-14
HLT623SD-10-14; MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT NICKEL ALLOY 718 OVERALL
AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PA 01-398-3614 PIN-RIVET 5320 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. 17446
56878
60516
73197
9N513
97928
1W025 HLT623SD-10-18
HLT623SD-10-18
HLT623SD-10-18
HLT623SD-10-18
HLT623SD-10-18; MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
MINIMUM TENSI NICKEL ALLOY 718 OVERALL
AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PA 01-398-3615 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 80378 DAA3122D559-023 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
MIL-P-22241, TY 1 GR B MIL SPEC SINGLE 01-398-3616 PIN-RIVET 5320 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. 17446
56878
60516
73197
9N513
97928
1W025 HLT623SD-10-13
HLT623SD-10-13
HLT623SD-10-13
HLT623SD-10-13
HLT623SD-10-13; MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT NICKEL ALLOY 718 OVERALL
AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PA 01-398-3617 PIN-RIVET 5320 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. 06725
06725
0PTK6
17446
56878
73197
92215
97928
1W025
76823 AIC-L780V3-2
AIC-L780V3U-2
HLT453SS-6-2
HLT453SS6-2
HLT453SS6-2
HLT453SS6-2 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
MINIMUM TENSILE STRENGTH
SHEAR TITANIUM ALLOY UNS R56400 OVERALL
AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR; 01-398-3618 PIN-RIVET 5320 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. 17446
56878
60516
73197
9N513
97928
1W025 HLT623SD-8-17
HLT623SD-8-17
HLT623SD-8-17
HLT623SD-8-17
HLT623SD-8-17
HLT62 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
MINIMUM TENSI NICKEL ALLOY 718 OVERALL
AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PA 01-398-3619 PIN-RIVET 5320 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. 17446
56878
60516
73197
9N513
97928
1W025 HLT623SD-8-12
HLT623SD-8-12
HLT623SD-8-12
HLT623SD-8-12
HLT623SD-8-12
HLT62 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
MINIMUM TENSI NICKEL ALLOY 718 OVERALL
AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PA 01-398-3620 PIN-RIVET 5320 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. 17446
56878
60516
73197
9N513
97928
06725
1W025
92215 HLT623SD-8-13
HLT623SD-8-13
HLT623SD-8-13
HLT623SD-8-13
HLT623SD-8-13
HLT62 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
MINIMUM TENSI NICKEL ALLOY 718 OVERALL
AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PA 01-398-3621 RECEPTACLE,TURNLOCK FASTENER 5325 A threaded or tempered item used to secure the STUD, TURNLOCK FASTENER or STUD ASSEMBLY, TURNLOCK FASTENER by engaging with the cross pin, cam lead threads, or eared nut of the STUD, TURNLOCK FASTENER and securing it by means of its thread locking or spring action. 1W025
5M902
80539 03A214-6-9-4
195005-6-9C-4M
195005-6-9C-4M MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT STEEL CORROSION RESISTING BARREL
STEEL COMP 630 RETAINER
IRON ALLOY 660 STUD; 01-398-3622 RIVET,BLIND 5320 An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY. 73197
5M902
98524
76823 BL5270L-8-6
PLT5270AC8-6
PLT5270AC8-6
03A054V08L6 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT TITANIUM ALLOY UNS R56400 NUT
STEEL COMP 304 OR
STEEL COMP 303SE OR
IRON ALLO 01-398-3623 PIN-RIVET 5320 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. 17446
56878
60516
73197
9N513
97928
1W025 HLT623SD-8-18
HLT623SD-8-18
HLT623SD-8-18
HLT623SD-8-18
HLT623SD-8-18
HLT62 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT NICKEL ALLOY K-500 OVERALL
AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL; 01-398-3624 PIN-RIVET 5320 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. 17446
56878
60516
73197
9N513
97928
73197 HLT623SD-8-19
HLT623SD-8-19
HLT623SD-8-19
HLT623SD-8-19
HLT623SD-8-19
HLT62 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT NICKEL ALLOY 718 OVERALL
AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PA 01-398-3625 PLATE,RESILIENT MOUNT 5340 An item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item. 13446
89749 24880516
996086 01-398-3626 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 13446 2411107 01-398-3627 WASHER,CONVEX 5310 A washer which is round with a centrally located hole. One bearing surface is smooth, flat, and unbroken, the other bearing surface is smooth, unbroken, and is raised to form a curved or spherical contour. See also WASHER (1), CONCAVE. Excludes BEARING, WASHER THRUST. 59579
83564 2674-1
2674-1 01-398-3628 RING,RETAINING 5325 A resilient metal item, circular or nearly circular, which is designed to be inserted into an internal or external groove and retained by its own spring action, or it may have external prongs or projections designed to be inserted into a hole and retained by spring action of the prongs which grip by imbedding into the material. For items having internal prongs which perform the same function, see PUSH ON NUT. It is used to keep and/or lock a part(s) in position, as a ball bearing on a shaft or in a housing. See also CLIP, RETAINING and PIN, LOCK. Excludes RING, CONNECTING, ROUND. 77237 247949 III END ITEM IDENTIFICATION 2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR) 01-398-3630 SPRING,HELICAL,COMPRESSION 5360 An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE. 77237 247656 01-398-3631 BRACKET,MOUNTING 5340 A bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified)
BRACKET, ANGLE
and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR
BRACKET, FIRE EXTINGUISHER
BRACKET, SOLENOID
BRACKET, TRACK, SLIDING DOOR
and RETAINER (as modified). 89749 2774629 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
OVERALL HEIGH STEEL
SAE NO 903 ASSN STD SINGLE MATERIAL RESPONSE
PAINT
2.000 INCHES NOMINAL 01-398-3632 SPACER,RING 5365 A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE
INSULATOR WASHER
and SHIM. See also SPACER, PLATE and SPACER, SLEEVE. 77237 244356 01-398-3633 WASHER,SPRING TENSION 5310 A bent spring metal washer with a centrally located hole. It is designed to exert pressure axially when assembled in place. 0JA67 18 453 006 01-398-3634 SPRING,HELICAL,COMPRESSION 5360 An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE. 77237 235960 END ITEM IDENTIFICATION 2420-66-148-7692, HMEE (HIGH MOBILITY ENGINEER EXCAVATOR) 01-398-3635 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 89749 552914 MATERIAL
STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAMETER
BODY INSIDE D STEEL OVERALL
17C SOLID
0.2500 INCHES NOMINAL
0.7500 INCHES NOMINAL
0.4062 I 01-398-3636 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 77873
77873 02063268
2-63268 01-398-3637 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 3D6E9
78500 1229-K-817
1229-K-817 01-398-3638 NUT,PLAIN,ROUND 5310 A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) 78500 NL-112-1C 01-398-3639 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 0JA67 13 729 144 01-398-3640 WASHER,LOCK 5310 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces 0JA67 18 453 003 01-398-3641 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 13446 3311N009 01-398-3642 BRACKET,MOUNTING 5340 A bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified)
BRACKET, ANGLE
and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR
BRACKET, FIRE EXTINGUISHER
BRACKET, SOLENOID
BRACKET, TRACK, SLIDING DOOR
and RETAINER (as modified). 89749 2774628 MATERIAL
OVERALL LENGTH
OVERALL HEIGHT
MOUNTING HOLE DIAMETER
MOUNTING HOLE STEEL
3.000 INCHES NOMINAL
2.000 INCHES NOMINAL
0.281 INCHES NOMINAL
PLAIN; 01-398-3643 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 89749 618639 MATERIAL
STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAMETER
BODY INSIDE D STEEL OVERALL
17C SOLID
2.9840 INCHES MINIMUM AND
3.0160 INCHES MAXIMUM
2.00 01-398-3644 PLUG,MACHINE THREAD 5365 An item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED. 89749 036247 01-398-3645 PLUG,MACHINE THREAD 5365 An item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED. 62983 308730 01-398-3646 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 89749 1303798 MATERIAL
STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAMETER
BODY INSIDE D STEEL OVERALL
17C SOLID
2.1090 INCHES MINIMUM AND
3.1410 INCHES MAXIMUM
0.74 01-398-3647 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 89749 1303421 MATERIAL
STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAMETER
BODY INSIDE D STEEL OVERALL
17C SOLID
0.2130 INCHES MINIMUM AND
0.2250 INCHES MAXIMUM
0.43 01-398-3648 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 89749 2803003 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
STYLE DESIGNATOR
OVERALL LENGTH STEEL OVERALL
ASTM-A-513 TY 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
17C SO 01-398-3649 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 62389 047154 01-398-3650 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 79150
89749 08641M
2791568 01-398-3651 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 89749 1303388 MATERIAL
STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAMETER
BODY INSIDE D STEEL OVERALL
17C SOLID
0.3960 INCHES MINIMUM AND
0.4160 INCHES MAXIMUM
0.50 01-398-3652 NUT,PLAIN,HEXAGON 5310 A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) 98349 L-14-MN-2-X-1 01-398-3653 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 89749 35E-20 01-398-3654 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 77640 G114986 01-398-3655 NUT,SELF-LOCKING,HEXAGON 5310 A nut having a flat bottom and 6 sides. An integral feature is incorporated for locking on the threads of a mating member. Excludes NUT (1), SELF-LOCKING, CAP. 12603
77237 59D8
59D8 THREAD SERIES
NOMINAL THREAD SIZE
THREAD QUANTITY PER INCH
THREAD CLASS
THRE UNC
0.500 INCHES
13
2B
RIGHT-HAND
PLASTIC POLYAMIDE LOCKING INSERT
STEEL O 01-398-3656 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 24976
64294 A418X006
A418X006 01-398-3657 BRACKET,MOUNTING 5340 A bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified)
BRACKET, ANGLE
and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR
BRACKET, FIRE EXTINGUISHER
BRACKET, SOLENOID
BRACKET, TRACK, SLIDING DOOR
and RETAINER (as modified). 89749 682037 MATERIAL
OVERALL HEIGHT
MOUNTING HOLE DIAMETER
MOUNTING HOLE TYPE
MOUNTING H STEEL COMP 1010
0.375 INCHES NOMINAL
0.344 INCHES NOMINAL
PLAIN
1 01-398-3658 PIN,STRAIGHT,HEADED 5315 A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC. 0CUJ4
59276 CP-265
047391 MATERIAL
STYLE DESIGNATOR
CHAMFER LENGTH
DIAMETER
PIN CHAMFER ANGLE
HEAD ST STEEL OVERALL
L193 STRAIGHT
0.060 INCHES NOMINAL
0.616 INCHES MINIMUM AND
0. 01-398-3659 PIN,SPRING 5315 A tubular item, so formed as to provide a spring action against the inside wall of a hole when driven into abutting pieces to position and hold them in place. 89749 2F1224 01-398-3660 SPACER,PLATE 5365 A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET
INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. 62389 098633 01-398-3661 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 89749 2797469 01-398-3662 PLUG,MACHINE THREAD 5365 An item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED. 62983 319265 01-398-3663 PARTS KIT,SEAL REPLACEMENT,MECHANICAL EQUIPMENT 5330 A parts kit consisting of numerous items. The kit may contain seals, gaskets, packing, and/or retainers for repairing mechanical equipment. Excludes kits including tools, collars, pins, sleeves and associated hardware. Excluds PARTS KIT (1), SEAL REPLACEMENT, ARTILLERY. 89749 1811217 COMPONENT QUANTITY
COMPONENT DOCUMENT ORIGIN
DOCUMENT SOURCE
DOCUMENT TYPE
D 6
INDUSTRIAL
89749
MFR CATALOG
1811217
1 01-398-3664 O-RING 5331 A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION. 01276
89749 FF9446-228
25K40208 MATERIAL
HARDNESS RATING
CENTER HOLE DIAMETER
CROSS-SECTIONAL HEIGHT
SPECIFI RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
65.0 SHORE DUROMETER A MINIMUM AND
75 01-398-3665 NUT,SELF-LOCKING,HEXAGON 5310 A nut having a flat bottom and 6 sides. An integral feature is incorporated for locking on the threads of a mating member. Excludes NUT (1), SELF-LOCKING, CAP. 89749 39DM10 THREAD SERIES
NOMINAL THREAD SIZE
THREAD PITCH IN MILLIMETERS
THREAD TOLERANC ISO M
10.0 MILLIMETERS
1.50
6H INTERNAL
RIGHT-HAND
STEEL OVERALL
NOT RATED 01-398-3666 SPRING,HELICAL,EXTENSION 5360 An open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE. 89749 2797757 MATERIAL
STYLE DESIGNATOR
SPRING FREE OUTSIDE DIAMETER
COIL HELIX DIRECTION; STEEL OVERALL
B1 CYLINDRICAL
12.9 MILLIMETERS NOMINAL
RIGHT-HAND
42 01-398-3667 PLUG,MACHINE THREAD 5365 An item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED. 08832 LFT-837 01-398-3668 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 78422 5603880 01-398-3669 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 24975
68505 115-67
115-67 01-398-3670 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 24975
68505 120-212
120-212 01-398-3671 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 89749 279774 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE STEEL COMP 1009 OVERALL
ASTM 569 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
12. 01-398-3672 NUT,SELF-LOCKING,HEXAGON 5310 A nut having a flat bottom and 6 sides. An integral feature is incorporated for locking on the threads of a mating member. Excludes NUT (1), SELF-LOCKING, CAP. 78422 5341130 01-398-3673 NUT,SELF-LOCKING,HEXAGON 5310 A nut having a flat bottom and 6 sides. An integral feature is incorporated for locking on the threads of a mating member. Excludes NUT (1), SELF-LOCKING, CAP. 89749 33 DM 50 THREAD SERIES
NOMINAL THREAD SIZE
THREAD PITCH IN MILLIMETERS
THREAD TOLERANC ISO M
5.0 MILLIMETERS
0.80
6H INTERNAL
RIGHT-HAND
COPPER ALLOY OVERALL
NOT 01-398-3674 WASHER,LOCK 5310 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces 78422 5640340 MATERIAL
SURFACE TREATMENT
COLOR
STYLE DESIGNATOR
HOLE DIAMETER
OUTSIDE DIA STEEL OVERALL
ZINC AND
CHROMATE OVERALL
YELLOW OVERALL
108 SPLIT HELICAL-RIG 01-398-3675 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 89749 1791211 01-398-3676 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 76364
76364 H-7993-L
7993-L-800 01-398-3677 PARTS KIT,SEAL REPLACEMENT,MECHANICAL EQUIPMENT 5330 A parts kit consisting of numerous items. The kit may contain seals, gaskets, packing, and/or retainers for repairing mechanical equipment. Excludes kits including tools, collars, pins, sleeves and associated hardware. Excluds PARTS KIT (1), SEAL REPLACEMENT, ARTILLERY. 75160 AH143521 01-398-3678 SEAL,PLAIN ENCASED 5330 A pliable rubber, felt, leather, or composition ring-shaped element, split or solid
with or without spring or spreader, having a metal shell on all or a portion of at least two of the outer surfaces. It may be designed to be either bolt mounted or pressmounted between fixed and moveable parts to form a tight and effective seal by the pressure of the spring or spreader or the resiliency inherent in the element material. Excludes PACKING WITH RETAINER. 77445 2195909 01-398-3679 PARTS KIT,SEAL REPLACEMENT,MECHANICAL EQUIPMENT 5330 A parts kit consisting of numerous items. The kit may contain seals, gaskets, packing, and/or retainers for repairing mechanical equipment. Excludes kits including tools, collars, pins, sleeves and associated hardware. Excluds PARTS KIT (1), SEAL REPLACEMENT, ARTILLERY. 75160
75160 AH143519
AH144593 01-398-3680 PACKING ASSEMBLY 5330 Any combination of items manufactured from PACKING MATERIAL to predetermined dimensions, or any combination of nonmetallic molded or formed shapes (other than solid rubber or synthetic rubber rings having a square or rectangular cross section) specifically designed and manufactured for use as a seal. The assembly may include metal lantern rings, metal separators, and/or end or adapter rings. 5F573
72902 8097-173-HR
8097-173-HR MATERIAL
CROSS-SECTIONAL SHAPE STYLE
CROSS-SECTIONAL HEIGHT
CENTER HOLE DIAME PLASTIC POLYURETHANE BOTTOM RING
RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR INTER 01-398-3681 SEAL ASSEMBLY,SHAFT,SPRING LOADED 4320 A combination of items used in sealing various rotary shaft equipment. It may include items such as bellows, disk, drive ring, flexible diaphragm, mating ring, o-ring, retainer, seat, sleeve, washer and the like. Excludes SEAL, PLAIN ENCASED. 71724
10941
10941 F-SD-3000FIGAASZ2.25YT1
091-125-01-7668
091-125-02-7668 01-398-3682 BEARING,WASHER,THRUST 3120 An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground
have visible or detectable means of lubrication
grooves, indentations
or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE. 53711
53711 595-6401267 ITEM 72
595-6401298-1 MATERIAL
STYLE DESIGNATOR
OUTSIDE DIAMETER
CORNER SHAPE
CROSS-SECTIONAL SHAP COPPER ALLOY OVERALL
23 ROUND
3.9600 INCHES MINIMUM AND
4.0000 INCHES MAXIMUM 01-398-3683 BEARING,WASHER,THRUST 3120 An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground
have visible or detectable means of lubrication
grooves, indentations
or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE. 53711
53711 595-6401267 ITEM 77
595-6401299-1 MATERIAL
STYLE DESIGNATOR
OUTSIDE DIAMETER
CORNER SHAPE
OVERALL THICKNESS
C COPPER ALLOY OVERALL
23 ROUND
3.2100 INCHES MINIMUM AND
3.2500 INCHES MAXIMUM 01-398-3684 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 04627
30076 1334771
1334771 01-398-3685 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 04627
30076 367945
367945 01-398-3686 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 12190
D9182
D9182 PL45267-256
42593-256
45267-256 MATERIAL RUBBER CHLOROPRENE CLASS CR OVERALL 01-398-3687 PACKING ASSEMBLY KIT,STUFFING TUBE 5330 A kit consisting of two PACKING ASSEMBLY to seal each end of stuffing tubes used for electrical penetration of bulkheads. 12190
D9182
D9182 PL45267-170
SEM216665Z
42593-170 COMPONENT DOCUMENT ORIGIN
DOCUMENT SOURCE
DOCUMENT TYPE
DOCUMENT IDENTIFICATI INDUSTRIAL
12190
MFR LETTER
PL45267-170
1
PACKING ASSEMBLY, NYLON STUFFING 01-398-3688 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 12190
D9182 PC45471-1
42593-217 MATERIAL
SPECIAL FEATURES RUBBER CHLOROPRENE CLASS CR OVERALL
HPU RESERVIOR, NEOPRENE IMPREGNATED CORK 01-398-3689 SEAL,NONMETALLIC SPECIAL SHAPED SECTION 5330 An item fabricated from NONMETALLIC SPECIAL SHAPED SECTION. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes BUSHING, NONMETALLIC
PACKING, PERFORMED
PAD, CUSHIONING;and SEAL, PLAIN. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC SPECIAL SHAPED SECTION. 0ASY6
0ASY6 M3255-9
X5845-11 01-398-3690 PACKING MATERIAL 5330 Any material specifically designed and constructed to resist deterioration from the action of heat, gas, chemicals or liquids and used to create a tight seal. It is supplied in loose form or in coils, spirals, spools or cut lengths, usually having a square or round cross section. For rubber items having a round cross section, see RUBBER ROUND SECTION. Excludes ROPE, ASBESTOS
CALKING COTTON
and CALKING LEAD. See also PACKING, PREFORMED
and OAKUM. 00062
11661
34646
14153
14153
00062 C1208-000-226
C1208-000-226
C1208-000-226
LL-HX9-2372
PO0156NRP
303639PC24 01-398-3691 SEAL ASSEMBLY,SHAFT,SPRING LOADED 4320 A combination of items used in sealing various rotary shaft equipment. It may include items such as bellows, disk, drive ring, flexible diaphragm, mating ring, o-ring, retainer, seat, sleeve, washer and the like. Excludes SEAL, PLAIN ENCASED. 96046
96046
96046 082682D ITEM NO. 2
082827
82827 01-398-3692 SEAL ASSEMBLY,SHAFT,SPRING LOADED 4320 A combination of items used in sealing various rotary shaft equipment. It may include items such as bellows, disk, drive ring, flexible diaphragm, mating ring, o-ring, retainer, seat, sleeve, washer and the like. Excludes SEAL, PLAIN ENCASED. 96046
96046
96046 082682D ITEM NO. 10
083459
83459 01-398-3693 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 00062
14153
00062 C1018-074-226
LL-HX9-2373
303639PC25 01-398-3694 PACKING,PREFORMED 5330 A circular shaped item with an aperture manufactured to predetermined dimensions and designed for use as a seal in stuffing boxes, packing nuts, and the like. It may be (1) any nonmetallic molded or formed ring (except solid (without joint) rings having a square or rectangular cross section)
or (2) any shredded metal or metal foil type metallic or semimetallic rings. Excludes felt items but includes multimaterial items in which one of the materials is felt. For solid (without joints) nonmetallic items with a square or rectangular cross section, see WASHER (as modified) and GASKET. For rubber items specifically designed for weather-proofing doors, windows, chests, and the like see SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
and SEAL, NONMETALLIC, SPECIAL SHAPED SECTION. For circular (with aperature) nonmetallic items with a solid round cross-section see O-RING. Excludes CUP, COMPRESSION
GASKET
WASHER (as modified)
and FELT, MECHANICAL, PREFORMED. 14153
14153
00062
13902
00062 LL-HX9-2374
P00216NRP
0802-150-11G-F
0802-150-11G-F
303679PC11 01-398-3695 PACKING,PREFORMED 5330 A circular shaped item with an aperture manufactured to predetermined dimensions and designed for use as a seal in stuffing boxes, packing nuts, and the like. It may be (1) any nonmetallic molded or formed ring (except solid (without joint) rings having a square or rectangular cross section)
or (2) any shredded metal or metal foil type metallic or semimetallic rings. Excludes felt items but includes multimaterial items in which one of the materials is felt. For solid (without joints) nonmetallic items with a square or rectangular cross section, see WASHER (as modified) and GASKET. For rubber items specifically designed for weather-proofing doors, windows, chests, and the like see SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
and SEAL, NONMETALLIC, SPECIAL SHAPED SECTION. For circular (with aperature) nonmetallic items with a solid round cross-section see O-RING. Excludes CUP, COMPRESSION
GASKET
WASHER (as modified)
and FELT, MECHANICAL, PREFORMED. 14153
14153
00062
13902
00062 LL-HX9-2375
P00348NRP
0802-150-11H-F
0802-150-11H-F
303679PC11A 01-398-3696 SPACER,RING 5365 A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE
INSULATOR WASHER
and SHIM. See also SPACER, PLATE and SPACER, SLEEVE. 09176
09176 N2275
1905-1393 ITEM 21 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
OVERALL THICKNESS
INSIDE DIAMET STEEL COMP 630
ASTM A564 ASSN STD SINGLE MATERIAL RESPONSE
0.154 INCHES MINIMU 01-398-3697 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 14153
00062
13902
00062 LL-HX9-2376
0802-150-13G-F
0802-150-13G-F
303679PC13 01-398-3698 PLUG,MACHINE THREAD 5365 An item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED. 60285 5252-A-MIL-I-20 MATERIAL
STYLE DESIGNATOR
FLANGE DIAMETER
CONNECTION STYLE
THREAD SERIES DES STEEL OVERALL
C24 PLUG, MACHINE
8.380 INCHES NOMINAL
J1 PLAIN
UNF EXTERNAL; 01-398-3699 WASHER,FLAT 5310 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. 53711
D9182
53711 DF2012-60-19
582-6404311-19
582-64043111-19 MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S STEEL OVERALL
1.781 INCHES MINIMUM AND
1.797 INCHES MAXIMUM
1 ROUND
3.000 IN 01-398-3700 5365-01-474-1999 5365 01-398-3701 PIN,STRAIGHT,HEADLESS 5315 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM)
for items whose length exceeds twelve inches (304 MM)
see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED. D9182
01289
7Y333 4801938-16
4801938-16
4801938-16 01-398-3702 SHIM 5365 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE
WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED
SHIM STOCK ASSORTMENT, GASKET
and BEARING, WASHER, THRUST. 09176
09176 RM267-5
1905-1393 ITEM 24 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
CONSTRUCTION
OVERALL THICKNESS; STEEL
QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE
ONE-PIECE
0.008 INCHES NOMIN 01-398-3703 SEAL,PLAIN ENCASED 5330 A pliable rubber, felt, leather, or composition ring-shaped element, split or solid
with or without spring or spreader, having a metal shell on all or a portion of at least two of the outer surfaces. It may be designed to be either bolt mounted or pressmounted between fixed and moveable parts to form a tight and effective seal by the pressure of the spring or spreader or the resiliency inherent in the element material. Excludes PACKING WITH RETAINER. 89762 93122 01-398-3704 NUT,PLAIN,ROUND 5310 A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) 51506
50027 1016-R-SS-210-12
9998-7026-001 THREAD SERIES
NOMINAL THREAD SIZE
THREAD QUANTITY PER INCH
THREAD CLASS
THRE UNC
0.086 INCHES
56
2B
RIGHT-HAND
STEEL COMP 303 OVERALL
PASSIVATE OVERALL 01-398-3705 PARTS KIT,SEAL REPLACEMENT,MECHANICAL EQUIPMENT 5330 A parts kit consisting of numerous items. The kit may contain seals, gaskets, packing, and/or retainers for repairing mechanical equipment. Excludes kits including tools, collars, pins, sleeves and associated hardware. Excluds PARTS KIT (1), SEAL REPLACEMENT, ARTILLERY. 11862
7X677
11862
61928
7X677
11862 24204443
24204443
8680901
8680901
8680901
8683971 01-398-3706 WIRE ROPE ASSEMBLY,SINGLE LEG 1640 An assembly consisting of wire rope, with terminal attachment(s) and/or end loop(s), in a continuous run from end to end. (If without attachments, one end must terminate in a loop.) It may contain one or more intermediate and/or end attachments such as sliding or fixed ring(s), hook(s), or the like. For items specifically designed for aviation, see WIRE ROPE ASSEMBLY, SINGLE LEG, AVIATION. Excludes CONTROL ASSEMBLY, PUSH-PULL. 80205 NAS302-24-0272 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
CORE CONSTRUC STEEL CORROSION RESISTING ALL ATTACHMENTS
STEEL WIRE ROPE
MIL-W-83420, TY 1, C 01-398-3707 STANDOFF,THREADED,SPACING 5340 A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified)
use maximum dimensions(s) for compliance. 51506
50027 14010-H-B-688-9
9998-7036-005 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT COPPER ALLOY OVERALL
QQ-B-626 COMP 360 1/2 HARD FED SPEC SINGLE MATERIAL RESPON 01-398-3708 BOLT,MACHINE 5306 An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. 26512
27624
06710
56878 GB511GJ4-9
PBF1503-4-9
VCB0043-4-9
124506-9 THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNJF
0.250 INCHES
28
3A
RIGHT-HAND
0.576 INCHES MINIMUM AND
0.593 INCHES M 01-398-3709 SPRING,HELICAL,COMPRESSION 5360 An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE. 95310
95310
73976 14551310 PIECE 12
14551310 PIECE 7
16020 01-398-3710 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 2B058
90031
2B058
90031 670-003-130
670-003-130
670-003-130/503
670-003-130/503 01-398-3711 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 2B058
90031 623-003-110
623-003-110 01-398-3712 STUD,PLAIN 5307 A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD. 35795
35795
35795 N42738
27402N PC 2
42738 01-398-3713 SPRING,HELICAL,COMPRESSION 5360 An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE. 84830
95310 LHC-218T-3-SS
14551208 PIECE 21 MATERIAL
SURFACE TREATMENT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
STYL STEEL OVERALL
PASSIVATE OVERALL
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVE 01-398-3714 SEAL,PLAIN 5330 A pliable rubber or composition ring-shaped element, split or jointless (solid) not encased in a metal shell, but having a spring, spreader and/or molded-in reinforcement. It is designed to be pressmounted between fixed and movable or moving parts to form a tight and effective seal. 09790
09790 85352
85840 ITEM 26 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION NICKEL ALLOY OVERALL
QQ-N-288, CL D FED SPEC SINGLE MATERIAL RESPONSE OVERALL 01-398-3715 SCREW ASSEMBLY,PANEL 5305 A headed, threaded fastening device over which may be assembled
(1) a stand-off
(2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw
a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded. 90245
53711 DCT7900-4-A-2
6239944-1 THREAD SERIES DESIGNATOR
NOMINAL THREAD DIAMETER
THREAD QUANTITY PER INCH
THR UNC
0.112 INCHES
40
2A
RIGHT-HAND
0.390 INCHES NOMINAL
COPPER ALLOY 360 ST 01-398-3716 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 09790 79507-1 01-398-3717 RETAINER,PACKING 5330 An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE. 09790
09790 78796
78798 ITEM 6 01-398-3718 SPRING,GARTER,EXTENSION 5360 A close-coiled helical extension spring, with ends fastened together to form a circle, designed to impose compression stresses toward the center of the circle thus formed when uniformly expanded. 0JF20 92-AV101-N-SYM-87 MATERIAL STEEL OVERALL 01-398-3719 SPRING,HELICAL,COMPRESSION 5360 An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE. 0JF20 92-AV101-N-SYM-57 MATERIAL
INSIDE DIAMETER
COIL QUANTITY STEEL OVERALL
1.375 INCHES NOMINAL
15 01-398-3720 RING,RETAINING 5325 A resilient metal item, circular or nearly circular, which is designed to be inserted into an internal or external groove and retained by its own spring action, or it may have external prongs or projections designed to be inserted into a hole and retained by spring action of the prongs which grip by imbedding into the material. For items having internal prongs which perform the same function, see PUSH ON NUT. It is used to keep and/or lock a part(s) in position, as a ball bearing on a shaft or in a housing. See also CLIP, RETAINING and PIN, LOCK. Excludes RING, CONNECTING, ROUND. 0JF20
0JF20 M68
92-AV101-N-SYM-0 01-398-3721 PIN,STRAIGHT,HEADLESS 5315 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM)
for items whose length exceeds twelve inches (304 MM)
see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED. 73124
73124 HP501Z93
ST051040BFM005 PC N0 14 01-398-3722 STUD,CONTINUOUS THREAD 5307 A headless fastener not exceeding 12 inches (304.8 mm) in length having an external thread of one nominal diameter running from end to end. See also ROD, CONTINUOUS THREAD. 86184
86184 16620 FIND 22
74461F MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
NOMINAL THREAD SIZE
THREAD QUAN COPPER ALLOY 655
QQ-C-591 FED SPEC SINGLE MATERIAL RESPONSE
0.438 INCHES
14 01-398-3723 PIN,STRAIGHT,HEADLESS 5315 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM)
for items whose length exceeds twelve inches (304 MM)
see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED. 59309
59309 10304-12-04
25307 SHT 4 ITEM 5 MATERIAL
FIRST END STYLE
SECOND END RELATIONSHIP WITH FIRST END
PIN OVERALL L STEEL COMP 316 OVERALL
9 SQUARE
IDENTICAL
9.750 INCHES NOMINAL
0.5000 INCHES 01-398-3724 GASKET AND PREFORMED PACKING SET 5330 Two or more different sizes and/or types of gaskets and preformed packing, grouped together in a single package and intended for one item replacement in the repair of pumps, valves, engines, compressors and the like. FOR ITEMS INTENDED FOR INDIVIDUAL REPEATED REPLACEMENT AND/OR GENERAL USE, SEE GASKET AND PREFORMED PACKING ASSORTMENT
for items containing gaskets, preformed packing, and additional items such as washers and seals, see PARTS KIT (as modified). See also GASKET
and GASKET SET. Excludes GASKET ASSORTMENT
and PACKING ASSORTMENT, PREFORMED. 1HQE5
11862
7X677
11862 031903X
24204441
24204441
8689989 01-398-3725 NUT,PLAIN,HEXAGON 5310 A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) 11862
7X677 15646261
15646261 01-398-3726 PIN,STRAIGHT,HEADLESS 5315 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM)
for items whose length exceeds twelve inches (304 MM)
see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED. 73124
73124 AV0600Z10
ST051040BFM005 PIECE 16 01-398-3727 GASKET SET 5330 Two or more sizes and/or types of gaskets packaged or grouped for issue as a unit for complete replacement. See also GASKET ASSORTMENT. 11862
7X677
11862
11862 12456409
12456409
12511043
12532481 01-398-3728 PLATE,MOUNTING 5340 A metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies. 94592 4480-4156 01-398-3729 PIN,TAPERED,THREADED 5315 A cone-shaped headless item, having a threaded portion at either end. It is used for aligning, fastening, and the like by fitting into a corresponding taper reamed hole. 94592 8130-4024 01-398-3730 MAGNET,PERMANENT 5340 An object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET
magnetized hand tools
and compass needles. 94592 7950-4029 01-398-3731 STUD,TURNLOCK FASTENER 5325 A pinlike item designed to turn within and be held in place by an EYELET, TURNLOCK FASTENER
RING, RETAINING
or the surface of the item it fastens. It is provided with either a cam slot, cam lead threads, or a hold for accommodating a pin. Securing is accomplished by mating with a LOCKSPRING, TURNLOCK FASTENER or RECEPTACLE, TURNLOCK FASTENER. It has either provisions to accommodate a knob or extension or has a head which has provisions to facilitate turning. 94222 82-12-280-16 MATERIAL
SURFACE TREATMENT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
TURN STEEL COMP 1008 HEAD
STEEL COMP 1008 STUD
ZINC AND
CHROMATE OVERALL
MIL-C-87 01-398-3732 PLUG,MACHINE THREAD 5365 An item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED. 98660 R77-32SS 01-398-3733 STUD,TURNLOCK FASTENER 5325 A pinlike item designed to turn within and be held in place by an EYELET, TURNLOCK FASTENER
RING, RETAINING
or the surface of the item it fastens. It is provided with either a cam slot, cam lead threads, or a hold for accommodating a pin. Securing is accomplished by mating with a LOCKSPRING, TURNLOCK FASTENER or RECEPTACLE, TURNLOCK FASTENER. It has either provisions to accommodate a knob or extension or has a head which has provisions to facilitate turning. 72794
26512 A35T42
GS520B7-42 MATERIAL
SURFACE TREATMENT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
TURN STEEL OVERALL
CADMIUM OVERALL
QQ-P-416, TY1, CL2 FED SPEC SINGLE TREATMENT RES 01-398-3734 PIN,EXPANDING GRIP 5315 A quick-acting fastening and aligning device with a cam handle and a solid, inner pin surrounded by male and female bushings. Actuation of the handle creates an expanding or contracting action. It may be furnished with captive pin, locking cam handle, lanyard or lock ring. 98524 EGP6C24KL6 MATERIAL
SURFACE TREATMENT
SHEAR STRENGTH
STYLE DESIGNATOR
OVERALL WIDTH
GR ALUMINUM ALLOY CAM HANDLE
STEEL CORROSION RESISTING INNER PIN
CADMIUM CAM HAND 01-398-3735 GROMMET,NONMETALLIC 5325 An item of any peripheral shape having flanges or groove(s) on its outer perimeter to provide a self-retaining characteristic when inserted in a hole, clamp, or the like. Designed for the purpose of protecting and/or insulating wires, cables and other items passing through it. Excludes BUSHING, NONMETALLIC
BUMPER
and INSULATOR BUSHING. 71483
D9182 15298P01
28884P-02 01-398-3736 PLATE,MOUNTING 5340 A metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies. 98897 3341087-3 01-398-3737 STRAP,WEBBING 5340 A narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE
LOOP, STRAP FASTENER
strap end clip
RING, DEE
Hook
and the like. Excludes STRAP, BERTH, MATTRESS RETAINING
STRAP, CHIN
safety straps
and WEBBING, TEXTILE. Do not use if a more specific item name applies. 98897 3339039-1 MATERIAL
LENGTH
WIDTH
COLOR
END TYPE
FOLD TYPE
ATTACHMENT METHOD FOR WHICH COTTON, MIL-W-530, TYPE 2A, CLASS 3
12.2000 INCHES NOMINAL
1.5000 INCHES NOMIN 01-398-3738 STANDOFF,THREADED,SPACING 5340 A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified)
use maximum dimensions(s) for compliance. 24930 GS11-120-4 01-398-3740 CLAMP,BLOCK 5340 A square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE. 67032 82-2734090-1 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
DISTANCE FROM CENTER OF MOUNTING ALUMINUM ALLOY 356.0
QQ-A-596, T6 FED SPEC SINGLE MATERIAL RESPONSE
0.500 INCH 01-398-3741 RIVET,TUBULAR 5320 A headed fastening device having a smooth shank which is hollow or having a cavity at its end and designed to have the shank clinched after insertion. 55284 2609826-2 01-398-3742 PIN,STRAIGHT,HEADLESS 5315 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM)
for items whose length exceeds twelve inches (304 MM)
see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED. 26055 706-182-001 01-398-3743 O-RING 5331 A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION. 11384 101491/126 01-398-3744 RIVET,SOLID 5320 A headed fastening device having a smooth solid shank designed to have the shank end upset after insertion. 55284 2610174-4 01-398-3745 SETSCREW 5305 An externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. A locking feature may be incorporated in the design of the head or threads. 66144 04-1027 01-398-3746 BOLT,HEXAGON,HEAD 5306 19200
19204 12012018
12012018 MATERIAL STEEL CORROSION RESISTING 01-398-3747 RIVET,BLIND 5320 An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY. 11815
55284 CCP-6-3
2610468-1 01-398-3748 BOLT,SHOULDER 5306 An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW. 66144 02-1302 01-398-3749 COVER,ACCESS 5340 A rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS. Excludes all covers not specifically designed to provide access for the purposes listed above. 81996
97427 1680-ALSE-205-1
88C7741 01-398-3750 PLUG,MACHINE THREAD 5365 An item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED. K5436
13446
89749 24880532
24880532
996547 01-398-3751 O-RING 5331 A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION. 89749
89749 6598740
910590 01-398-3753 SEAL,PLAIN 5330 A pliable rubber or composition ring-shaped element, split or jointless (solid) not encased in a metal shell, but having a spring, spreader and/or molded-in reinforcement. It is designed to be pressmounted between fixed and movable or moving parts to form a tight and effective seal. 77873
77873 02070354
2-70354 01-398-3754 SEAL,PLAIN ENCASED 5330 A pliable rubber, felt, leather, or composition ring-shaped element, split or solid
with or without spring or spreader, having a metal shell on all or a portion of at least two of the outer surfaces. It may be designed to be either bolt mounted or pressmounted between fixed and moveable parts to form a tight and effective seal by the pressure of the spring or spreader or the resiliency inherent in the element material. Excludes PACKING WITH RETAINER. 3D6E9
78500 A-1205-E-1253
A-1205-E-1253 01-398-3755 CLAMP,LOOP 5340 A clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL
BAND, RETAINING
CLAMP (1), C
BRACKET PIPE. 13446 36671416 01-398-3756 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 3D6E9
78500 A-1205-B-1198
A-1205-B-1198 01-398-3757 PIN,SHOULDER,HEADLESS 5315 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end. 62389 098981 01-398-3758 SEAL,PLAIN 5330 A pliable rubber or composition ring-shaped element, split or jointless (solid) not encased in a metal shell, but having a spring, spreader and/or molded-in reinforcement. It is designed to be pressmounted between fixed and movable or moving parts to form a tight and effective seal. 89749 4319102 01-398-3759 CAP,PROTECTIVE,DUST AND MOISTURE SEAL 5340 An item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR
HOOD, SEALING, BOTTLE
and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. 08832 LFT-757 01-398-3760 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 30130 9051204-01 01-398-3761 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 52374
D9182
52374 01-435-0138-5 ITEM 61
60-650-0040-1
60-650-1040-1 01-398-3762 STUD,PLAIN 5307 A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD. 86301 25355-108-30 01-398-3763 PARTS KIT,SEAL REPLACEMENT,MECHANICAL EQUIPMENT 5330 A parts kit consisting of numerous items. The kit may contain seals, gaskets, packing, and/or retainers for repairing mechanical equipment. Excludes kits including tools, collars, pins, sleeves and associated hardware. Excluds PARTS KIT (1), SEAL REPLACEMENT, ARTILLERY. 02570
12623 T-9K-6N
T-9K-6N 01-398-3764 PARTS KIT,SEAL REPLACEMENT,MECHANICAL EQUIPMENT 5330 A parts kit consisting of numerous items. The kit may contain seals, gaskets, packing, and/or retainers for repairing mechanical equipment. Excludes kits including tools, collars, pins, sleeves and associated hardware. Excluds PARTS KIT (1), SEAL REPLACEMENT, ARTILLERY. 27005 314733 01-398-3765 PARTS KIT,SEAL REPLACEMENT,MECHANICAL EQUIPMENT 5330 A parts kit consisting of numerous items. The kit may contain seals, gaskets, packing, and/or retainers for repairing mechanical equipment. Excludes kits including tools, collars, pins, sleeves and associated hardware. Excluds PARTS KIT (1), SEAL REPLACEMENT, ARTILLERY. 11862
7X677 26036529
26036529 01-398-3766 PIN,STRAIGHT,HEADLESS 5315 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM)
for items whose length exceeds twelve inches (304 MM)
see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED. D9182
0BR59
01289
7Y333
01289 4801938-15
4801938-15
4801938-15
4801938-15
7569E14 PIECE 2 01-398-3767 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. D9182
D9182
39428
D9182 8815K16
8815K16 (O/A WI DTH 1 IN)
8815K16 (O/A WIDTH 1 IN)
8815K16 (0/A WI TH 01-398-3768 SEAL,PLAIN ENCASED 5330 A pliable rubber, felt, leather, or composition ring-shaped element, split or solid
with or without spring or spreader, having a metal shell on all or a portion of at least two of the outer surfaces. It may be designed to be either bolt mounted or pressmounted between fixed and moveable parts to form a tight and effective seal by the pressure of the spring or spreader or the resiliency inherent in the element material. Excludes PACKING WITH RETAINER. 32574 19-172-56 01-398-3769 PIN,STRAIGHT,HEADLESS 5315 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM)
for items whose length exceeds twelve inches (304 MM)
see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED. 03502 101A610BA-1201 01-398-3770 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 76122 40677 01-398-3771 SPRING,HELICAL,COMPRESSION 5360 An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE. 0JF20 92-AV101-N-SYM-11 01-398-3772 O-RING 5331 A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION. 76122 43605 01-398-3773 SPRING,HELICAL,COMPRESSION 5360 An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE. 73976
0DHG4
95310
D9182 13060
14551000 PIECE 88
14551000 PIECE 88
73976 01-398-3774 PIN,LOCK 5315 A fastening device formed from resilient wire stock into a shape resembling the letter "U", of which at least one of the prongs is straight for insertion into a hole
the other prong may have one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action. See also CLIP, RETAINING and RING, RETAINING. 75954 048.100.0090 01-398-3775 RETAINER,PACKING 5330 An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE. 2Y614 3A16213 01-398-3776 SEAL,PLAIN ENCASED 5330 A pliable rubber, felt, leather, or composition ring-shaped element, split or solid
with or without spring or spreader, having a metal shell on all or a portion of at least two of the outer surfaces. It may be designed to be either bolt mounted or pressmounted between fixed and moveable parts to form a tight and effective seal by the pressure of the spring or spreader or the resiliency inherent in the element material. Excludes PACKING WITH RETAINER. 11862
7X677 14071849
14071849 01-398-3777 SEAL,PLAIN ENCASED 5330 A pliable rubber, felt, leather, or composition ring-shaped element, split or solid
with or without spring or spreader, having a metal shell on all or a portion of at least two of the outer surfaces. It may be designed to be either bolt mounted or pressmounted between fixed and moveable parts to form a tight and effective seal by the pressure of the spring or spreader or the resiliency inherent in the element material. Excludes PACKING WITH RETAINER. 11862
7X677 10191640
10191640 01-398-3778 SEAL,PLAIN ENCASED 5330 A pliable rubber, felt, leather, or composition ring-shaped element, split or solid
with or without spring or spreader, having a metal shell on all or a portion of at least two of the outer surfaces. It may be designed to be either bolt mounted or pressmounted between fixed and moveable parts to form a tight and effective seal by the pressure of the spring or spreader or the resiliency inherent in the element material. Excludes PACKING WITH RETAINER. 11862
7X677 15661460
15661460 01-398-3779 HANDWHEEL 5340 An item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL. 43689 330476-T1XX-23 01-398-3780 RING,RETAINING 5325 A resilient metal item, circular or nearly circular, which is designed to be inserted into an internal or external groove and retained by its own spring action, or it may have external prongs or projections designed to be inserted into a hole and retained by spring action of the prongs which grip by imbedding into the material. For items having internal prongs which perform the same function, see PUSH ON NUT. It is used to keep and/or lock a part(s) in position, as a ball bearing on a shaft or in a housing. See also CLIP, RETAINING and PIN, LOCK. Excludes RING, CONNECTING, ROUND. 94592 5040-4284 01-398-3781 SPRING,HELICAL,COMPRESSION 5360 An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE. 07524 471621 01-398-3782 SPRING,HELICAL,COMPRESSION 5360 An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE. 01343
01343 B12488-006-292
SW1005 REV C 01-398-3783 SPRING,HELICAL,COMPRESSION 5360 An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE. 15158 OSDC750 PC 6 01-398-3784 CAP,FILLER OPENING 5342 A part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK
and COVER (1), (as modified). 64559 74001510 01-398-3785 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 26512 123SAV58666-1 END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTURERS CODE
DESIGN CONT E-2C
26512
123SAV58666-1 01-398-3786 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 26512 123SAV57021-1 END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTURERS CODE
DESIGN CONT E-2C
26512
123SAV57021-1 01-398-3787 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 30003 1988AS222 01-398-3788 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 30003 1988AS233 01-398-3789 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 30003 1988AS225 01-398-3790 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 30003 1988AS228 01-398-3791 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 82577 5034240-5 END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTURERS CODE
DESIGN CONT F-14D ACFT
82577
5034240-5 01-398-3792 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 96214 2930703-2 END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTURERS CODE
DESIGN CONT P-3C ACFT
96214
2930703-2 01-398-3793 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 82577 5085230 END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTURERS CODE
DESIGN CONT F-14D ACFT
82577
5085230 01-398-3794 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 96214 878737-4 END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTURERS CODE
DESIGN CONT P-3C ACFT
96214
878737-4 01-398-3795 COVER,ACCESS 5340 A rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS. Excludes all covers not specifically designed to provide access for the purposes listed above. 17863 8400337-501 PERIPHERAL SHAPE STYLE
WIDTH
LENGTH
CROSS-SECTIONAL SHAPE STYLE
BODY THICKNE 22 RECTANGLE, MULTI HOLES
13.980 INCHES NOMINAL
17.480 INCHES NOMINAL
26 FLAT 01-398-3796 PIN,STRAIGHT,HEADLESS 5315 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM)
for items whose length exceeds twelve inches (304 MM)
see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED. 28638
30003
80020 3223AS514-1
3223AS514-1
3223AS514-1 MATERIAL
SURFACE TREATMENT
FIRST END STYLE
FIRST END TAPER LENGTH
FIRST END STEEL COMP 304 OVERALL
PASSIVATE OVERALL
1 CHAMFERED
0.060 INCHES NOMINAL
45 01-398-3797 PULLEY,GROOVE 3020 A pulley with one or more grooved faces or rims of the same diameter. For pulleys encased in a shell or frame, see BLOCK, TACKLE. For items specifically designed for aviation, see PULLEY(1), GROOVE, AVIATION. 28638
30003
80020 3223AS516-1
3223AS516-1
3223AS516-1 HUB END OUTSIDE DIAMETER AND LOCATION
MATERIAL AND LOCATION
GROOVE SHAPE
GROO 0.378 INCHES MINIMUM BOTH ENDS AND
0.380 INCHES MAXIMUM BOTH ENDS
BRASS, NAVAL 01-398-3798 RELAY ASSEMBLY 5945 Two or more RELAYS (as modified) having a common mounting or mounted on each other. If item contains electronic components see ELECTRONIC COMPONENT ASSEMBLY. Excludes AMPLIFIER-RELAY ASSEMBLY
RELAY ASSEMBLY GROUP
and RELAY-SWITCH. 76301 74A732100-1001 SPECIAL FEATURES
III END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTU MFR DESCRIBES AS RELAY BOX ASSEMBLY
F/A-18 AIRCRAFT
76301
74A732100-1001 01-398-3799 COMPUTER,ANALOG 7020 A computer which solves problems by translating physical conditions into related mechanical or electrical quantities and uses mechanical or electrical equivalent circuits as an analog for the physical phenomenon being investigated. The physical quantities in an analog computer are varied continuously instead of in discrete steps as in a digital computer. Excludes peripheral hardware. 66464
54418 1754AS129-1
485000-31 SPECIAL FEATURES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
III END ITEM MONITOR, EMSP
AS DIFFERENTIATED BY THE SOURCE CONTROL DRAWING NO.
ENGINE MODEL 01-398-3800 PANEL,INTERFACE DEVICE 4920 An item which is specifically designed to contain wiring and circuitry components necessary to interface the Avionic Unit Under Test and the prime Automatic Test Equipment. 96547 13702101TPH III UNPACKAGED UNIT LENGTH
III UNPACKAGED UNIT WIDTH
III UNPACKAGED UNIT HEIGH 17.000 INCHES NOMINAL
11.500 INCHES NOMINAL
15.000 INCHES NOMINAL
96547
1370 01-398-3801 INDICATOR,PRESSURE 6685 An indicator which indicates the pressure of a gas or liquid in a given system. 61174
58880 A55A9096-1
40-732-1 ELECTRICAL CONNECTION QUANTITY
PRESENTATION TYPE
ACCURACY RATING
SCALE DIVISI 1
DIAL
2000.0 POUNDS PER SQUARE INCH SINGLE INDICATOR SINGLE SCALE
6 SINGLE I 01-398-3802 RECEIVER-TRANSMITTER,COUNTERMEASURES 5865 A single component capable of performing the functions of a RECEIVER (1), COUNTERMEASURES and TRANSMITTER, COUNTERMEASURES. 13672
30003 TSF70B462
497AS734 OVERALL LENGTH
OVERALL DEPTH
OVERALL HEIGHT
III END ITEM IDENTIFICATION
THE 5.750 INCHES MAXIMUM
6.562 INCHES NOMINAL
4.875 INCHES MAXIMUM
EP3E ACFT
136 01-398-3803 CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL,BRANCHED 5995 A definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL with branches (forks), and having one or more ends processed and/or terminated in fittings to provide for connection to other items. Excludes LEAD, TEST. See also wiring harness. 76301 74D053108-1001 CONDUCTOR QUANTITY
MATERIAL
CABLE ASSEMBLY OVERALL LENGTH
BRANCH QUANTITY
TE 58
COPPER ALLOY CORE CONDUCTOR ALL CONDUCTORS
PLASTIC ETHYLENE-TETRAFLUOROETHY 01-398-3804 STUD,STEPPED 5307 A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends on which the nominal diameter of one threaded section is greater than the other. The entire unthreaded portion must be of a single diameter equal to or smaller than the maximum major diameter of the larger threaded end. Includes radial grooves or thread reliefs. Excludes items with tapered threads. 99207 4110T07P01 THREAD DIRECTION
SPECIAL FEATURES
III END ITEM IDENTIFICATION
THE MANUFACTURE RIGHT-HAND
BOLT,DOUBLE THREAD-OIL COOLER BRACKET
ENGINE MODEL T64
99207
4110 01-398-3805 STATOR,ENGINE GENERATOR 2925 A stator which is a maintenance part of a GENERATOR, ENGINE ACCESSORY. 24235 52944 HEIGHT
III END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTURERS CODE; 2.562 INCHES MAXIMUM
J400 ENGINE
24235
52944 01-398-3806 TUBE ASSEMBLY,METAL 4710 A length of tubing, straight, or prebent to a predetermined angle, with added component(s) that forms an end connection on one or both ends. For flexible tube assemblies, see HOSE ASSEMBLY (as modified). For items having perforations in the tubing or attachments, see TUBE ASSEMBLY, FIRE EXTINGUISHING SYSTEM. Excludes items having integral preformed or plain ends, TUBE, BENT (as modified), and items which are branched or forked. 76301
76301 74A582004-1005
74A582004-1007 TUBING MATERIAL
TUBE OUTSIDE DIAMETER
WALL THICKNESS
END CONNECTION STYLE
DE ALUMINUM ALLOY, QQ-A-250/11, ALLOY 6061, T6
2.500 INCHES NOMINAL
0.035 INCHES 01-398-3807 HINGE,HALF ASSEMBLY 1560 76301 74A150679-1003 III END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTURERS CODE
DESIGN F/A-18 NON-HSP SUPPORT
76301
74A150679-1003 01-398-3808 PANEL,CONTROL,ELECTRICAL-ELECTRONIC EQUIPMENT 5895 A panel, upon which are mounted such items as indicator lights, meters, relays, switches and the like, which is specifically designed for the purpose of controlling the operation of electrical and electronic equipment. See also PANEL, TEST, ELECTRICAL. 02995
17863 TY9100-1
8912468-5 PANEL MATERIAL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
III END ITEM I ALUMINUM ALLOY
AS DIFFERENTIATED BY THE SOURCE CONTROL DWR NO.
S3 ACFT
17863; 01-398-3809 FILTER,RADIO FREQUENCY INTERFERENCE 5915 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE. 25656
15634
06481
17863
06481 400195
400218
7137137-3
7137147-2
7137147-3 OVERALL LENGTH
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE
MFR SOURCE CONTRO 3.400 INCHES NOMINAL
06481
7137147-3 01-398-3810 STUD,SELF-LOCKING 5307 A headed fastener threaded externally on a portion or on the full length of the shank. The head has projections on the underside or periphery, or is otherwise designed to be mechanically pressed and embedded in a metallic panel, or the like. It is securely locked in position by the displaced metal. For items that require locking rings, see BOLT, SELF-LOCKING and STUD, LOCKED IN. Excludes INSERT, SCREW THREAD. 28638
30003
80020 3223AS705-1
3223AS705-1
3223AS705-1 MATERIAL
SURFACE TREATMENT
OVERALL LENGTH
THREAD SERIES DESIGNATOR
NOMINAL T STEEL COMP 303
PASSIVATE OVERALL
1.400 INCHES NOMINAL
UNF STUD THREAD
0.375 01-398-3811 GENERATING AND CHARGING PLANT,OXYGEN-NITROGEN,SEMI 3655 A mobile unit designed to produce a continuous supply of nitrogen and/or oxygen, and charge it into container(s). 30003 1828AS103-1 III FSC APPLICATION DATA
THE MANUFACTURERS DATA
MANUFACTURERS CODE
DESIGN CON TRAILER,OXGYEN
30003
1828AS103-1 01-398-3813 BLADE,TURBINE ROTOR,AIRCRAFT GAS TURBINE ENGINE 2840 An item mounted on a DISK, TURBINE, AIRCRAFT GAS TURBINE ENGINE. It is designed to create the flow of air in the turbine section of an ENGINE, GAS TURBINE, AIRCRAFT. 99207 6084T11P03 ENGINE SECTION LOCATION
III END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MA LOW PRESSURE TURBINE
F404 ENGINE
99207
6084T11P03 01-398-3814 FITTING,STRUCTURAL COMPONENT,AIRCRAFT 1560 An item of unique shapes and cross-sectional configurations specifically designed with dimensional tolerances and finishes. It may be metallic and/or nonmetallic and must be able to mate with or join to like items with aircraft application. The item may consist of more then one (1) piece to form an assembly. Do not use if a more specific item name exists. Excludes BRACKET (1), STRUCTURAL COMPONENT, AIRCRAFT. 78286 70209-82206-045 MATERIAL
AIRCRAFT LOCATION
SIDE FOR WHICH DESIGNED
III END ITEM IDENTIFICATIO ALUMINUM ALLOY
SIDE FUSELAGE
LEFT SIDE
SH60B HELO MARK III
78286
70209-8220 01-398-3815 PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT 5975 A panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK. 78286 70550-83107-045 PANEL MATERIAL
III END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTURE ALUMINUM ALLOY
SH-60F ACFT
78286
70550-83107-045 01-398-3816 REGULATOR,VOLTAGE 6110 A component within a single inclosure or provided with a single mounting specifically designed to control automatically the voltage output of an electrical system within certain required limits, regardless of variations of the effective load or of input voltages within a specific range. Does not include items in which regulation is accomplished solely by transformer action. See also REGULATOR SET, VOLTAGE. Excludes REGULATOR, ENGINE GENERATOR. 96214 2700057-2 SPECIAL FEATURES
III END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTU VOLTAGE REGULATOR HEAT SINK ASSEMBLY
AIRCRAFT MODEL P3C PECULIAR
96214
270005 01-398-3817 SWITCH,RADIO FREQUENCY TRANSMISSION LINE 5985 An item specifically designed for mechanically or electronically positioning one or more radio frequency transmission line sections so as to couple it or them to other sections in a radio frequency transmission line system. The switching function may be operated by a manual actuator, an electromechanical actuator or by means of an arrangement of semiconductors and passive circuit devices. Excludes RELAY, (as modified). 3B150
49956
18876 G377339-2
G377339-2
11448438-002 III END ITEM IDENTIFICATION
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE
MFR PATRIOT, SURFACE TO AIR MISSILES
18876
11448438-002 01-398-3818 CANE,WALKING 6515 An item used as an aid in ambulation. 11544 5191 UNIT TYPE
OVERALL LENGTH
HANDLE END DIAMETER
TIP END DIAMETER
SHAFT TYPE
HA PATIENT-OPERATED
62.000 INCHES MINIMUM AND
70.000 INCHES MAXIMUM
1.000 INCHES 01-398-3819 FILM,PHOTOGRAPHIC 6750 A flexible plastic material in roll or sheet form bearing a coating which, when exposed to a light source and then given a chemical treatment, produces a visible black and white or color image. The roll film may come with or without perforations, sound track, leader, and/or trailer. The sheet film may be cut in sizes that can be easily handled one sheet at a time, or prepared in pack form where a quantity of sheets are enclosed in a pocket so designed that individual exposures can be made by removing tabbed shields. Photographic film may be used for, but not be limited to aerial photography, motion picutre, microfilm, graphic arts, portrait, reproductions, and the like. 13873
19139
19139 CVC PROJECT
PRO 400 FILM
196 6340 FILM TYPE
FILM SUBTYPE
MATERIAL
EMULSION TYPE
REPRODUCTION TYPE
EMULSION SE STILL PICTURE
CAMERA
PLASTIC
COLOR
NEGATIVE
DAYLIGHT
CLEAR
400 INTERNATIO 01-398-3821 CANE,WALKING 6515 An item used as an aid in ambulation. 11544 5190 UNIT TYPE
OVERALL LENGTH
HANDLE END DIAMETER
TIP END DIAMETER
SHAFT TYPE
HA PATIENT-OPERATED
70.000 INCHES MINIMUM AND
78.000 INCHES MAXIMUM
1.000 INCHES 01-398-3822 SWITCH,ROTARY 5930 A switch actuated by a definite angular rotation of the switch shaft about its axis. For items having rated actuation travel and pressure characteristics, see SWITCH, SENSITIVE. Excludes RELAY, ROTARY
SWITCH, STEPPING
and SWITCH, TELEPHONE (as modified). 64366 505A685G01 INDIVIDUAL SECTION QUANTITY
SWITCH ACTUATOR INDEXING POSITION QUANTITY
SWITCH 3
2 SINGLE ACTUATOR
30.0 DEGREES SINGLE ACTUATOR
THREADED STUD
18 CONTACTS; 01-398-3824 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. S0564
04627
30076 F2SM-20-WP8
1367523
1367523 01-398-3825 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 05395 4178-06701-17 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
CROSS-SECTION ALUMINUM ALLOY 5052 OVERALL
QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE OVERAL 01-398-3826 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 14632 794151-3 01-398-3827 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. 05395 4178-06701-15 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
CROSS-SECTION ALUMINUM ALLOY 5052 OVERALL
QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE OVERAL 01-398-3828 CANE,WALKING 6515 An item used as an aid in ambulation. 11544 5390 UNIT TYPE
OVERALL LENGTH
HANDLE END DIAMETER
TIP END DIAMETER
SHAFT TYPE
HA PATIENT-OPERATED
36.000 INCHES NOMINAL
0.875 INCHES
0.875 INCHES
STRAIGHT
C 01-398-3829 CANE,WALKING 6515 An item used as an aid in ambulation. 11544 5392 UNIT TYPE
OVERALL LENGTH
HANDLE END DIAMETER
TIP END DIAMETER
SHAFT TYPE
HA PATIENT-OPERATED
40.000 INCHES NOMINAL
0.875 INCHES
0.875 INCHES
STRAIGHT
C 01-398-3830 SEAL,PLAIN ENCASED 5330 A pliable rubber, felt, leather, or composition ring-shaped element, split or solid
with or without spring or spreader, having a metal shell on all or a portion of at least two of the outer surfaces. It may be designed to be either bolt mounted or pressmounted between fixed and moveable parts to form a tight and effective seal by the pressure of the spring or spreader or the resiliency inherent in the element material. Excludes PACKING WITH RETAINER. S0564
04627
30076 F802-11-399
1361691
1361691 01-398-3831 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. S0564
04627
30076 FE30-10-271B
1360889
1360889 01-398-3832 O-RING 5331 A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION. S0564
04627
30076 FE1H-14-122A
1361801
1361801 01-398-3833 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. S0564
04627
30076 B621-15-173
1367191
1367191 01-398-3835 PANEL,IDENTIFICATION,COMBAT 2590 An item specifically designed to be attached to a combat/tactical vehicle. It is color coded to assist in the visual identification of the vehicle on the battlefield as a friendly unit. 19207
67101 12379835-2
2031813-2 COLOR
III END ITEM IDENTIFICATION TAN
END ITEM IDENTIFICATION:FLU 419 SEE
COLOR:TAN
APPLICATION:PANEL
PANEL PO 01-398-3836 PANEL,IDENTIFICATION,COMBAT 2590 An item specifically designed to be attached to a combat/tactical vehicle. It is color coded to assist in the visual identification of the vehicle on the battlefield as a friendly unit. 19207
67101 12379835-1
2031813-1 COLOR
SPECIAL FEATURES
III END ITEM IDENTIFICATION
III PART NAME ASSIGNED BY GREEN
INCLUDES PANEL, REFLECTOR, P/N 12379837-1
AND FRAME, P/N 12379836-1
END 01-398-3837 PANEL,IDENTIFICATION,COMBAT 2590 An item specifically designed to be attached to a combat/tactical vehicle. It is color coded to assist in the visual identification of the vehicle on the battlefield as a friendly unit. 19207
67101 12379833-2
2031815-1-2 MATERIAL
OVERALL LENGTH
OVERALL HEIGHT
COLOR
GENERAL CHARACTERISTICS ITEM DE ALUMINUM
48.000 INCHES NOMINAL
4.760 INCHES NOMINAL
TAN
END ITEM IDENTIFICAT 01-398-3838 PANEL,IDENTIFICATION,COMBAT 2590 An item specifically designed to be attached to a combat/tactical vehicle. It is color coded to assist in the visual identification of the vehicle on the battlefield as a friendly unit. 19207
67101 12379833-1
2031815-1-1 MATERIAL
OVERALL LENGTH
OVERALL HEIGHT
COLOR
GENERAL CHARACTERISTICS ITEM DE ALUMINUM
48.000 INCHES NOMINAL
4.760 INCHES NOMINAL
GREEN
END ITEM IDENTIFIC 01-398-3839 PANEL,IDENTIFICATION,COMBAT 2590 An item specifically designed to be attached to a combat/tactical vehicle. It is color coded to assist in the visual identification of the vehicle on the battlefield as a friendly unit. 19207
67101 12379764-2
2031787-2 OVERALL LENGTH
OVERALL HEIGHT
COLOR
III END ITEM IDENTIFICATION 11.710 INCHES NOMINAL
23.940 INCHES NOMINAL
TAN
END ITEM IDENTIFICATION:M113A 01-398-3840 PANEL,IDENTIFICATION,COMBAT 2590 An item specifically designed to be attached to a combat/tactical vehicle. It is color coded to assist in the visual identification of the vehicle on the battlefield as a friendly unit. 19207
67101 12379834-2
2031815-2-2 MATERIAL
OVERALL LENGTH
COLOR
SPECIAL MARKINGS
SPECIAL FEATURES
III END ITE ALUMINUM ALLOY
48.000 INCHES NOMINAL
TAN
THIS SIDE OFF
DO NOT EXTEND TAPE BE 01-398-3841 PANEL,IDENTIFICATION,COMBAT 2590 An item specifically designed to be attached to a combat/tactical vehicle. It is color coded to assist in the visual identification of the vehicle on the battlefield as a friendly unit. 19207
67101 12379763-1
2031808-1 MATERIAL
OVERALL LENGTH
OVERALL HEIGHT
COLOR
SPECIAL MARKINGS
III END ITEM ALUMINUM ALLOY
47.600 INCHES NOMINAL
12.750 INCHES NOMINAL
GREEN
THIS SIDE O 01-398-3842 PANEL,IDENTIFICATION,COMBAT 2590 An item specifically designed to be attached to a combat/tactical vehicle. It is color coded to assist in the visual identification of the vehicle on the battlefield as a friendly unit. 19207
67101 12379763-2
2031808-2 SPECIAL FEATURES END ITEM IDENTIFICATION:M113A3 APC M981 FISTV M577A3 ACP M1064A3 MORT M901A3 TOW 01-398-3843 PANEL,IDENTIFICATION,COMBAT 2590 An item specifically designed to be attached to a combat/tactical vehicle. It is color coded to assist in the visual identification of the vehicle on the battlefield as a friendly unit. 19207
67101 12379786-1
2031788-1 COLOR
III END ITEM IDENTIFICATION GREEN
END ITEM IDENTIFICATION:BFVS M2A2 IFV M2A3 CFV
COLOR:GREEN
APPLICATION: 01-398-3844 PANEL,IDENTIFICATION,COMBAT 2590 An item specifically designed to be attached to a combat/tactical vehicle. It is color coded to assist in the visual identification of the vehicle on the battlefield as a friendly unit. 19207
67101 12379819-2
2031807-2 01-398-3845 PANEL,IDENTIFICATION,COMBAT 2590 An item specifically designed to be attached to a combat/tactical vehicle. It is color coded to assist in the visual identification of the vehicle on the battlefield as a friendly unit. 19207
67101 12379786-2
2031788-2 SPECIAL FEATURES END ITEM IDENTIFICATION:BFVS, M2A2 IFV, M2A3 CFV;COLOR:TAN
APPLICATION:PANEL
P 01-398-3846 PANEL,IDENTIFICATION,COMBAT 2590 An item specifically designed to be attached to a combat/tactical vehicle. It is color coded to assist in the visual identification of the vehicle on the battlefield as a friendly unit. 19207
67101 12379785-1
2031789-1 SPECIAL FEATURES END ITEM IDENTIFICATION:BFVS, M2A2 IFV, M2A3 CFV
COLOR:GREEN
APPLICATION:PANEL 01-398-3847 PANEL,IDENTIFICATION,COMBAT 2590 An item specifically designed to be attached to a combat/tactical vehicle. It is color coded to assist in the visual identification of the vehicle on the battlefield as a friendly unit. 67101 2031811-2 SPECIAL FEATURES END ITEM IDENTIFICATION:M993 MLRS
COLOR:TAN
APPLICATION:PANEL
PANEL POSITION: 01-398-3848 BOND ASSEMBLY,AIRCRAFT 1560 78286 70209-24021-083 MATERIAL
SPECIAL FEATURES
III END ITEM IDENTIFICATION GLASS FIBER
USED ON AIR DUCT MODIFICATION
SH-60F ASW HELICOPTER 01-398-3849 BOND ASSEMBLY,AIRCRAFT 1560 78286 70209-24021-084 MATERIAL
SPECIAL FEATURES
III END ITEM IDENTIFICATION GLASS FIBER
USED ON AIR DUCT MODIFICATION
SH-60F ASW HELICOPTER 01-398-3850 BLOWER PLUG,RESPIRATOR 4240 50378 GVP-115 MATERIAL
SPECIAL FEATURES
III END ITEM IDENTIFICATION PLASTIC
ABS PLASTIC,THREADED ON ONE END
USED TO CAP OFF INLET AND OUTLET OF TH 01-398-3851 FLANGE,DUCT AIRCRAFT 1560 78286 70209-24021-201 MATERIAL
III END ITEM IDENTIFICATION GLASS FIBER
SH-60F ASW HELICOPTER 01-398-3852 TWO STAGE RAMP 6670 7W667
13873 AC-2R
NEW PRODUCT GENERAL CHARACTERISTICS ITEM DESCRIPTION
SPECIAL FEATURES ASSEMBLED: 78LX24W INCHES, WEIGHT: 70 LBS, ENTRY RAMP: 46LX24W INCHES, WEIGHT: 3 01-398-3853 FILTER PLUG,RESPIRATOR 4240 50378 GVP-116 MATERIAL
SPECIAL FEATURES
III END ITEM IDENTIFICATION PLASTIC
ABS PLASTIC,THREADED ON ONE END
USED TO CAP OFF THE FACEPIECE WHEN USI 01-398-3855 CUFF ASSEMBLY 1615 78286 70150-09109-041-X8 01-398-3856 MODULAR CAUSEWAY,FE 1945 34712 E03152 III END ITEM IDENTIFICATION PORT SUPPORT EQUIPMENT 01-398-3858 BATTERY,STORAGE 6140 A battery, composed of two or more cells forming a single unit, which may or may not be readily separable and which may be efficiently recharged by sending an electric current through the cells in a direction opposite that of the discharging current. The item may be furnished with integral charging facilities. For items which are composed of a single cell see CELL BATTERY. 0WJD8
61222 GS012P3-LL
S65 VOLTAGE IN VOLTS
SPECIAL FEATURES 6.0
CAPACITY IS 4AH;POWER:14 WATTS FOR 90 MINUTES;FOR EMERGENCY LIGHTS 01-398-3859 CLEANER,RECORDER HEAD 5835 An item used to remove shavings and foreign particles by mechanical means from a recording head. 08125
7J886
0EMM0 RT-RCLP
RT-RCLP
869943 GENERAL CHARACTERISTICS ITEM DESCRIPTION
III END ITEM IDENTIFICATION MINI-CASSETTE
DICTAPHONE 01-398-3860 VERAPAMIL HYDROCHLORIDE INJECTION 6505 All Except USA 32288 NDC00517-5402-05 01-398-3861 6240-01-396-2167 6240 01-398-3862 JACK,TELEPHONE 5935 A contact spring type electrical fitting of two or more conductors, which is arranged for the insertion of a PLUG, TELEPHONE. One conductor may be grounded. Does not include separable telephone jacks which are termed, JACK ASSEMBLY, TELEPHONE. Excludes JACK, TIP. 70778
0R4E7 OR-81200103A
SE-103A8 ELECTRICAL INSULATION FEATURE
MAXIMUM VOLTAGE RATING IN VOLTS
SPECIAL FEATURES INSULATED COMPLETELY
110.0 AC
8 CONDUCTOR;MODULAR,SURFACE MOUNT 01-398-3863 CARTRIDGE,TONER 7510 A replaceable cartridge that contains dry toner, used for the copying of documents in a PRINTER (as modified) or copying machine (as modified). The item may contain and house the photosensitive drum, corona wire, and the like. For toner used to refill toner reservoirs, see TONER, INDIRECT, ELECTROSTATIC PROCESSING or TONER, DIRECT, ELECTROSTATIC PROCESSING. 61722 S051009 COLOR
CARTRIDGE TYPE
SPECIAL FEATURES
III END ITEM IDENTIFICATION BLACK
NEW
LONG LIFE IMAGING CARTRIDGE
EPSON EPL-7000, EPL-7500 AND EPL-8000 L 01-398-3865 PARTS KIT,BEARING REPLACEMENT,MECHANICAL EQUIPMENT 3120 A parts kit consisting of one or more bearings or bearing assemblies, which are issued as a unit for repair/replacement. It may include gasket(s), O-ring(s), race(s), seal(s), spacer(s), washer(s), or the like. 0A7U4
0A7U4 2-3-400-99BP
2-3-400-99BPKIT 01-398-3866 TUBE,METALLIC 4710 A straight, hollow product, welded or seamless, of round, square, or any other cross section and continuous periphery, which does not conform in cross sectional dimensions to recognized pipe standards, or those in Tables 1 through 10, Appendix C, FIIG A004A. It is designed to convey fluids, gasses, and/or semisolids. It may be rolled into coils for ease in handling. For items designed to join a tube or tube fitting to another tube, pipe, or hose or fitting, see ADAPTER (as modified)
COUPLING (as modified)
or NIPPLE (as modified). Excludes TUBE, BENT (as modified)
PIPE, METALLIC
SPACER, SLEEVE
METAL BAR (hollow)
and items with fittings, except end protectors. 81346 ASTM B111 MEASURING METHOD AND LENGTH
CROSS-SECTIONAL SHAPE STYLE
WALL THICKNESS
DIAMET 168.000 INCHES NOMINAL SPECIFIC
1 PLAIN ROUND
0.035 INCHES NOMINAL
0.875 INCH 01-398-3867 TUBE,METALLIC 4710 A straight, hollow product, welded or seamless, of round, square, or any other cross section and continuous periphery, which does not conform in cross sectional dimensions to recognized pipe standards, or those in Tables 1 through 10, Appendix C, FIIG A004A. It is designed to convey fluids, gasses, and/or semisolids. It may be rolled into coils for ease in handling. For items designed to join a tube or tube fitting to another tube, pipe, or hose or fitting, see ADAPTER (as modified)
COUPLING (as modified)
or NIPPLE (as modified). Excludes TUBE, BENT (as modified)
PIPE, METALLIC
SPACER, SLEEVE
METAL BAR (hollow)
and items with fittings, except end protectors. 81346 ASTM B111 MEASURING METHOD AND LENGTH
CROSS-SECTIONAL SHAPE STYLE
WALL THICKNESS
DIAMET 168.000 INCHES NOMINAL SPECIFIC
1 PLAIN ROUND
0.049 INCHES NOMINAL
1.125 INCH 01-398-3868 CONTACT ASSEMBLY,ELECTRICAL 5999 Two or more CONTACT, ELECTRICAL on a common mounting or mounted on each other. Excludes BRUSH SET, ELECTRICAL CONTACT
CONTACT SET (as modified)
and INSERT, ELECTRICAL CONNECTOR. 00779
73030 102844-7
791267-6 III END ITEM IDENTIFICATION PACER DAWN 01-398-3869 CONTACT ASSEMBLY,ELECTRICAL 5999 Two or more CONTACT, ELECTRICAL on a common mounting or mounted on each other. Excludes BRUSH SET, ELECTRICAL CONTACT
CONTACT SET (as modified)
and INSERT, ELECTRICAL CONNECTOR. 00779
73030 102844-6
791267-5 III END ITEM IDENTIFICATION PACER DAWN 01-398-3870 SWIVEL JOINT,TUBE 4730 A metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement. 25795 600019 III FSC APPLICATION DATA
THE MANUFACTURERS DATA
MANUFACTURERS CODE
DESIGN CON PACER DAWN
25795
600019 01-398-3872 BUSHING,SLEEVE 3120 A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE
BUSHING, TAPERED
SPACER, SLEEVE
INSULATOR, BUSHING
and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. 96906
96906 MS14238
MS14238A04P023 MATERIAL
STYLE DESIGNATOR
BODY OUTSIDE DIAMETER
SPEC/STD CONTROLLING DATA
MA ALUMINUM ALLOY OVERALL
22C SOLID
0.3750 INCHES MINIMUM AND
0.3758 INCHES MAXI 01-398-3873 MICROCIRCUIT,DIGITAL 5962 A microcircuit specifically designed to generate, modify, or process electrical signals which operate with two distinct or binary states. These states are commonly referred to as on and off, true and false, high and low, or "1" and "0". 81349
81349
81349
81349 MIL-M-38510/309
M38510/30904B2A
M38510/30904B2B
M38510/30904B2X OUTPUT LOGIC FORM
DESIGN FUNCTION AND QUANTITY
OPERATING TEMP RANGE
TERMINAL TRANSISTOR-TRANSISTOR LOGIC
2 MULTIPLEXER
-55.0 TO 125.0 DEG CELSIUS
20 PIN; 01-398-3874 MICROCIRCUIT,MEMORY 5962 A circuit designed to store information and/or coded instructions for later use. Item has pins or other connections to install in a computing device. Does not include magnetic drums, tapes, punched cards or the like. For items that have portable type connectors see MEMORY, PORTABLE, SOLID STATE. 65786 PAL22V10CM-15DMB VOLTAGE RATING AND TYPE PER CHARACTERISTIC
MEMORY DEVICE TYPE
OPERATING TEMP R 5.0 VOLTS NOMINAL POWER SOURCE
PAL
-55.0 TO 125.0 DEG CELSIUS
24 PIN
DUAL-IN 01-398-3875 POWER SUPPLY 6130 A component which converts available alternating current or direct current electrical power into a form required to operate another component or set. The item may consist of a combination of an INVERTOR, VIBRATOR
VIBRATOR, INTERRUPTER
VIBRATOR, SELF-RECTIFYING
INVERTOR, POWER, STATIC
with a transformer and rectifier(s) employing electron tubes, semiconductor diode or metallic (dry disc) type components, or the synchronized secondary contact(s) of a VIBRATOR, SELF-RECTIFYING
or may consist of electron tubes, semiconductor diode or metallic (dry disc) type rectifiers and capacitors in transformerless (alternating current-direct current type) circuits which may be of the voltage-multiplier type. The item may incorporate a FILTER, DIRECT CURRENT POWER and provisions for regulation of input and/or output voltage. Excludes battery chargers
rotating machinery types
such as motor generators and dynamotors, POWER SUPPLY, CAUTERY APPARATUS
POWER SUPPLY, ELECTRODIAGNOSTIC INSTRUMENTS, and POWER SUPPLY, MOBILE RESPIRATOR. 80103 EWS-300-15 OUTPUT VOLTAGE RATING
OUTPUT CURRENT RATING
OUTPUT CONNECTION TYPE
ELECTRICAL 15.0 DC VOLTS NOMINAL SINGLE POWER OUTPUT
22.0 DC AMPERES NOMINAL SINGLE POWER 01-398-3876 COUNTER,ELECTRONIC,DIGITAL READOUT 6625 An instrument used to count the frequency of recurrent electronic events and display the count on the panel of the instrument in numeric form. May also include facilities for a readout printed on tape. May include facilities for a very accurate output which can be used as a secondary transfer standard. It can be used to measure frequency, period, time interval, phase angle, frequency ratio, and for multiple period averaging. See also COUNTER, ELECTRONIC, DIGITAL and INDICATOR, DIGITAL DISPLAY. 32873 6163A DISPLAY TYPE
DISPLAY DIGIT QUANTITY
DISPLAY POSITIONED DECIMAL POINT
CURRENT LIGHT EMITTING DIODE
7
PROVIDED
AC/DC
4.000 INCHES NOMINAL 01-398-3877 SCREW,MACHINE 5305 An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS
BOLT, EXTERNALLY RELIEVED BODY
SCREW, EXTERNALLY RELIEVED BODY
and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT
BOLT, MACHINE
BOLT, INTERNAL WRENCHING
and SCREW, CAP SOCKET HEAD. 80064
0AT62
93236 HL-11255-120
SCR1567
SCR1567 NOMINAL THREAD DIAMETER
FASTENER LENGTH
SCREW MATERIAL
HEAD STYLE
SPECIAL FE 0.375 INCHES
3.000 INCHES NOMINAL
STEEL CORROSION RESISTING
A11 SQUARE
CLASS 01-398-3878 CONNECTOR,PLUG,ELECTRICAL 5935 An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE
JACK, TIP
PLUG, TELEPHONE
PLUG TIP
INSERT, ELECTRICAL CONNECTOR
CONNECTOR BODY (as modified)
and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL
WIRING HARNESS (as modified)
and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR. F0210
71785 N7709611200
1221-103 BODY STYLE
OVERALL LENGTH
OVERALL DIAMETER
POLARIZATION METHOD
INSERT POSITI 35A STRAIGHT SHAPE
22.35 MILLIMETERS NOMINAL
9.91 MILLIMETERS NOMINAL
KEYWAY 01-398-3879 CASE,CARTRIDGE 1395 An item designed to hold an ammunition primer and propellant, and to which a projectile may be affixed. Its profile and size conform to that of the chamber of the weapon in which the round is fired except for recoilless rifles. For a loaded cartridge case, see CARTRIDGE (as modified). 76478 700799 CARTRIDGE SIZE FOR WHICH DESIGNED
END LINK
SPECIAL FEATURES
III END ITEM IDEN 9.000 MILLIMETER
NOT INCLUDED
PLASTIC, UN-PRIMED
FATS BROWNING 9MM HP, TRAINI 01-398-3880 EXPANSION JOINT,PIPE 4730 73680 PTFE215-6 DESIGN TYPE
END CONNECTION TYPE
BOLT HOLE QUANTITY
BOLT HOLE DIAMETER
FLANGE SPOOL
FLANGED
8
0.750 INCHES NOMINAL
13.875 INCHES NOMINAL
IRON 01-398-3881 1560-01-424-8084 1560 01-398-3882 VALVE,SAFETY RELIEF 4820 A valve designed to automatically release excessive pressures. It is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. It is not designed for regulation of continuously fluctuating loads. It may be inline or cartridge (manifold) design. Excludes VALVE (1), RELIEF, PRESSURE AND TEMPERATURE. 35795
35795
35795 C3751
1385 B OF M 2385RS423
2385RS423 MATERIAL
STYLE DESIGNATOR
FLOW CONTROL DEVICE
III END ITEM IDENTIFICATION STEEL COMP M15 BODY
NICKEL ALLOY STEM
A1A STRAIGHT THRU FLANGED ENDS
STEM
CP 01-398-3883 ADAPTER,STRAIGHT,PIPE TO TUBE 4730 An adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line. 90526 3810-1 MATERIAL
CONNECTION TYPE
THREAD SERIES DESIGNATOR
NOMINAL THREAD SIZE COPPER ALLOY OVERALL
THREADED INTERNAL PIPE 1ST END
THREADED EXTERNAL TUBE 2ND 01-398-3884 HOSE,AIR DUCT 4720 A flexible, tubular item of light wall construction. It must have single or multiple layers of nonmetallic material, but may contain metal wire reinforcement, foil type liner, and/or woven or braided cover. It is designed to convey under low pressure gaseous material, such as air and fumes, and light weight solid materials, such as dust, powders, and fibers. For items with couplings, see HOSE ASSEMBLY, AIR DUCT. For items of sleeve section design rated for high pressure use, see SLEEVE, SEAL, COUPLING. Excludes hose, nonmetallic. 81518 CWY-S-NR-1X-6.0 MATERIAL
STYLE DESIGNATOR
CROSS-SECTIONAL SHAPE STYLE
INSIDE DIAMETER
CONNEC PLASTIC POLYAMIDE SINGLE PLY
A8 BALL AND SOCKET
B3 ROUND
6.000 INCHES NOMINAL 01-398-3885 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 06540
1YGB8 9232-A-171-17
9232-A-171-17 MATERIAL
STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAMETER
BODY INSIDE D ALUMINUM OVERALL
17C SOLID
0.3700 INCHES MINIMUM AND
0.3800 INCHES MAXIMUM
0 01-398-3886 SPACER,SLEEVE 5365 A tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. It is designed to maintain a predetermined distance between assembled parts. The item may be with or without flange(s) of any peripheral shape. The overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (When the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). For items having other than a round or hexagon peripheral shape, see SPACER, PLATE. Excludes items with lubricating features, see BEARING, SLEEVE and BUSHING, SLEEVE. See also BUSHING, TAPERED
SPACER, RING
WASHER, FLAT
and WASHER, (as modified). 06540
1YGB8 9255-N-171
9255-N-171 MATERIAL
STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAMETER
BODY INSIDE D PLASTIC POLYAMIDE OVERALL
17C SOLID
0.2500 INCHES NOMINAL
0.5000 INCHES NOMIN 01-398-3887 PIN-RIVET 5320 A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque. 73197 HSTM10-04-19 MATERIAL
HEAD STYLE
HEAD HEIGHT
HEAD MAJOR DIAMETER
SHANK STYLE
FASTENER LE TITANIUM OVERALL
A34 FLAT CHAMFER
0.9 MILLIMETERS MINIMUM AND
1.2 MILLIMETERS 01-398-3888 HOSE,AIR DUCT 4720 A flexible, tubular item of light wall construction. It must have single or multiple layers of nonmetallic material, but may contain metal wire reinforcement, foil type liner, and/or woven or braided cover. It is designed to convey under low pressure gaseous material, such as air and fumes, and light weight solid materials, such as dust, powders, and fibers. For items with couplings, see HOSE ASSEMBLY, AIR DUCT. For items of sleeve section design rated for high pressure use, see SLEEVE, SEAL, COUPLING. Excludes hose, nonmetallic. 81518 CWY-S-NR-1X-5.0 MATERIAL
STYLE DESIGNATOR
CROSS-SECTIONAL SHAPE STYLE
INSIDE DIAMETER
CONNEC PLASTIC POLYAMIDE SINGLE PLY
A8 BALL AND SOCKET
B3 ROUND
5.000 INCHES NOMINAL 01-398-3889 PIN,STRAIGHT,HEADED 5315 A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC. 96906 MS20392-2P25 MATERIAL
STYLE DESIGNATOR
CHAMFER LENGTH
DIAMETER
UNDER HEAD LENGTH
PIN CHA STEEL COMP XM-13 OVERALL
L193 STRAIGHT
0.046 INCHES MAXIMUM
0.184 INCHES MINI 01-398-3890 PIN,STRAIGHT,HEADED 5315 A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC. 96906 MS20392-1P13 MATERIAL
STYLE DESIGNATOR
CHAMFER LENGTH
DIAMETER
UNDER HEAD LENGTH
PIN CHA STEEL COMP XM-13 OVERALL
L193 STRAIGHT
0.062 INCHES MAXIMUM
0.122 INCHES MINI 01-398-3891 CONNECTOR,PLUG,ELECTRICAL 5935 An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE
JACK, TIP
PLUG, TELEPHONE
PLUG TIP
INSERT, ELECTRICAL CONNECTOR
CONNECTOR BODY (as modified)
and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL
WIRING HARNESS (as modified)
and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR. 96906 MS3459W32-17SN BODY STYLE
OVERALL LENGTH
OVERALL DIAMETER
MATING END QUANTITY
CONTACT POSIT 7A STRAIGHT SHAPE, INTERNAL COUPLING
2.125 INCHES MAXIMUM
2.463 INCHES MAXIMUM 01-398-3892 CONNECTOR,PLUG,ELECTRICAL 5935 An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE
JACK, TIP
PLUG, TELEPHONE
PLUG TIP
INSERT, ELECTRICAL CONNECTOR
CONNECTOR BODY (as modified)
and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL
WIRING HARNESS (as modified)
and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR. 96906 MS3459W32-17S BODY STYLE
OVERALL LENGTH
OVERALL DIAMETER
MATING END QUANTITY
CONTACT POSIT 7A STRAIGHT SHAPE, INTERNAL COUPLING
2.125 INCHES MAXIMUM
2.463 INCHES MAXIMUM 01-398-3893 CONNECTOR,PLUG,ELECTRICAL 5935 An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE
JACK, TIP
PLUG, TELEPHONE
PLUG TIP
INSERT, ELECTRICAL CONNECTOR
CONNECTOR BODY (as modified)
and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL
WIRING HARNESS (as modified)
and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR. 96906 MS3459W32-17SW BODY STYLE
OVERALL LENGTH
OVERALL DIAMETER
MATING END QUANTITY
CONTACT POSIT 7A STRAIGHT SHAPE, INTERNAL COUPLING
2.125 INCHES MAXIMUM
2.463 INCHES MAXIMUM 01-398-3895 NIPPLE,TUBE 4730 A straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets. 30780
45681 6HTX-SS
6HTX-SS MATERIAL STEEL CORROSION RESISTING OVERALL 01-398-3896 7030-01-447-3660 7030 01-398-3897 REGULATOR,VOLTAGE 5963 A component within a single inclosure or provided with a single mounting specifically designed to control automatically the voltage output of an electrical system within certain required limits, regardless of variations of the effective load or of input voltages within a specific range. Does not include items in which regulation is accomplished solely by transformer action. See also REGULATOR SET, VOLTAGE. Excludes REGULATOR, ENGINE GENERATOR. 62445 117-9005 01-398-3898 TAPE PROGRAM,AUTOMATIC DATA PROCESSING 7030 A thin flexible strip of material in roll form, having a magnetic coating on one surface upon which is recorded the sequence of instructions required by a computer for solving a particular problem. It is stored in a cartridge, cassette, or reel which is designed to be inserted into the tape transport of a computer. See also DISK PROGRAM, AUTOMATIC DATA PROCESSING. For disks or tapes haivng no prerecorded data, see DISK, FLEXIBLE and TAPE, ELECTRONIC DATA PROCESSING. 68477
68477 WP 5.1 FOR VAX
ZANOVWP51 01-398-3899 FILE,DISK,FLEXIBLE 7045 A rigid container designed to store and/or transport DISK, FLEXIBLE. It may be square or rectangular in shape and may have indexing separators. Excludes BOX, FILING
and the like. 0SX51 6720 01-398-3900 FILE,DISK,FLEXIBLE 7045 A rigid container designed to store and/or transport DISK, FLEXIBLE. It may be square or rectangular in shape and may have indexing separators. Excludes BOX, FILING
and the like. 0SX51 1710 01-398-3901 SOFTWARE KIT 7030 A collection of items not having the same basic name, designed to enhance the operation of automatic data processing equipment. May include such items as DISK PROGRAM, AUTOMATIC DATA PROCESSING
TAPE PROGRAM, AUTOMATIC DATA PROCESSING
EXPANDER CARD, COMPUTER, AUTOMATIC DATA PROCESSING
and instruction manuals. 0CDA2
0CDA2
0CDA2 NORTON ANTIVIRUS 3.0
07-00-01035-IN
07-00-01039 01-398-3902 GENERATOR,ENGINE ACCESSORY 2920 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT. 62445
62445 117-7328
117-9755 01-398-3903 COMPUTER,DIGITAL 7021 A computer which processes information represented by combinations of discrete or discontinuous data. It is a computer for performing sequences of arithmetic and logical operations, not only on external data but also on its own internally stored instructions, in contrast to a continuous data, analog computer. It may be designed for specific and/or combination operation, such as asynchronous, automatic, fixed program, and the like. May include handheld computer. Excludes peripheral hardware. 09975 B38-GXL 01-398-3904 MONITOR,TELEVISION 5820 An item for the display of images transmitted over a closed electrical circuit by a compatible television camera. The item may include an audio channel, but does not include the radio frequency components required for reception of video signals from a television transmitting set. For items that include these components, see RECEIVER (1), TELEVISION. For items that provide similar data by means of other than closed circuit television, see INDICATOR, VIDEO. 09975 EGV300-COL SPECIAL FEATURES DISPLAY 14 IN. COLOR ERGO 01-398-3905 TAPE,ELECTRONIC DATA PROCESSING 7045 A thin flexible strip of material with a layer of magnetic coating on one surface on which character information is recorded while processing at electronic speeds. The information is recorded in the form of magnetized spots, for storage or reproduction in printed or punched card form. May be in roll form or encased in a cartridge or cassette. For items not specifically designed for use in electronic data processing see TAPE, SOUND RECORDING. For prerecorded disk or tape computer programs see DISK PROGRAM, AUTOMATIC DATA PROCESSING and TAPE PROGRAM, AUTOMATIC DATA PROCESSING. 09975 PCT525-INT SPECIAL FEATURES BACK-UP TAPE, 525 MB, FOR PERSONAL COMPUTER 01-398-3906 EXPANDER CARD,COMPUTER,AUTOMATIC DATA PROCESSING 7025 INC 41220 CANCELLED ON 042195 A circuit card which expands the functional use of a computer. Includes memory cards, controller cards, interface cards and the like. 09975 MPM1-4M 01-398-3907 EXPANDER CARD,COMPUTER,AUTOMATIC DATA PROCESSING 7025 INC 41220 CANCELLED ON 042195 A circuit card which expands the functional use of a computer. Includes memory cards, controller cards, interface cards and the like. 09975 SG400-C 01-398-3908 BUSHING,SLEEVE 3120 A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE
BUSHING, TAPERED
SPACER, SLEEVE
INSULATOR, BUSHING
and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. 07482 5051M34P11 MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
STYLE DESIGNATOR
OVERALL LENGTH NICKEL ALLOY 718 OVERALL
AMS 5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
22 01-398-3909 WINDOW,MARINE 2040 A single or multi-piece item(s), curved or flat, with or without frame(s), of transparent material. Designed for mounting in a boat or ship cabin, door, bridge or the like, for protection from water, wind and other foreign matter and to allow visibility. 81100
81100 KS-27906 PC. NO. 4
KS-27906-4 01-398-3910 BUSHING,SLEEVE 3120 A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE
BUSHING, TAPERED
SPACER, SLEEVE
INSULATOR, BUSHING
and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. 80205 NAS537B3P028 MATERIAL
SURFACE TREATMENT
STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAM COPPER ALLOY 642 OVERALL
CADMIUM AND
CHROMATE OVERALL
17C SOLID
0.2755 INCHE 01-398-3911 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 14632 796356-5 PART NAME ASSIGNED BY CONTROLLING AGENCY
END ITEM IDENTIFICATION
THE MANUFACTU FM DEMOD 300/500
QKD
14632
796356-5 01-398-3912 BUSHING,SLEEVE 3120 A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE
BUSHING, TAPERED
SPACER, SLEEVE
INSULATOR, BUSHING
and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. 80205 NAS537B3P031 MATERIAL
SURFACE TREATMENT
STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAM COPPER ALLOY 642 OVERALL
CADMIUM AND
CHROMATE OVERALL
17C SOLID
0.3055 INCHE 01-398-3913 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 14632 726009-24 01-398-3914 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 14632 726010-11 01-398-3915 BUSHING,SLEEVE 3120 A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE
BUSHING, TAPERED
SPACER, SLEEVE
INSULATOR, BUSHING
and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. 80205 NAS537B4P081 MATERIAL
SURFACE TREATMENT
STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAM COPPER ALLOY 642 OVERALL
CADMIUM AND
CHROMATE OVERALL
17C SOLID
0.8055 INCHE 01-398-3916 BOOK 7610 A collection of two or more sheets of any length or shape, written or printed. The sheets are fastened together between covers and may be permanently bound or punched for permanent loose-leaf binding or stored on electronic media, containing no programs or software. Does not include maintenance, installlation, and/or operating instructions applicable to one or more related pieces of equipment, see MANUAL, TECHNICAL. Do not use if a more specific name exists, such as BIBLE
DICTIONARY
and HYMNBOOK. See also BOOK SET. 28181
28181
89875 T38497A
38497
94-9-6-34 DE 01-398-3918 BACKSHELL,ELECTRICAL CONNECTOR 5935 An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions. 05395
06324 S30529AS1405C2
402AS001NF1405LC2 01-398-3919 CIRCUIT CARD ASSEMBLY 5998 A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single PRINTED CIRCUIT BOARD or TERMINAL BOARD upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as AMPLIFIER (as modified)
POWER SUPPLY
or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as AMPLIFIER SUBASSEMBLY
POWER SUPPLY SUBASSEMBLY
or the like. For an assembly of electrical/electronic components mounted on other than a single PRINTED WIRING BOARD, see ELECTRONIC COMPONENTS ASSEMBLY. Excludes PRINTED CIRCUIT BOAR 14632 726010-12 01-398-3920 VALVE,CHECK 4820 A valve permitting flow in one direction only. It does not have a stem, except when equipped with a lever and weight and has no pressure adjustment. It may be inline or cartridge (manifold) design. 08441 0021727501 VALVE OPERATION METHOD
MOUNTING POSITION
END ITEM IDENTIFICATION AUTOMATIC
VERTICAL
4440-01-369-4722 01-398-3921 BUSHING,SLEEVE 3120 A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE
BUSHING, TAPERED
SPACER, SLEEVE
INSULATOR, BUSHING
and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. 42280
42280 BK-5446-VMZ
15-3024-11 STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAMETER
BODY INSIDE DIAMETER
F 22C SOLID
1.4375 INCHES NOMINAL
0.8790 INCHES NOMINAL
0.5625 INCHES NOMINAL; 01-398-3922 BACKPLANE ASSEMBLY 5998 An insulating panel upon which two or more CONNECTOR, RECEPTACLE, ELECTRICAL, are mounted, and completely processed electrical conductor paths are deposited, etched, or printed in various paths. It provides or completes a circuit between two or more CIRCUIT CARD ASSEMBLY or ELECTRONIC COMPONENTS ASSEMBLY. It may be designed for panel or chassis mounting, or for insertion into a CONNECTOR, RECEPTACLE, ELECTRICAL. Includes motherboards. For items containing processed electrical conductor paths and contacts for plug-in connecting facilities, see PRINTED WIRING BOARD. See also PRINTED CIRCUIT BOARD
CIRCUIT CARD ASSEMBLY and CABLE ASSEMBLY, PRINTED, FLEXIBLE. 07397
57958 C5163231
C5163231-1 PART NAME ASSIGNED BY CONTROLLING AGENCY
END ITEM IDENTIFICATION CIRCUIT CARD ASSEMBLY-RECORDER MOTHERBOARD
RD-634/UYH-15 RECORDER-REPRODUCER,SO 01-398-3923 BUSHING,SLEEVE 3120 A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE
BUSHING, TAPERED
SPACER, SLEEVE
INSULATOR, BUSHING
and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. 96906 MS14238C07-018 MATERIAL
SURFACE TREATMENT
STYLE DESIGNATOR
OVERALL LENGTH
BODY OUTSIDE DIAM STEEL COMP 630 OVERALL
PASSIVATE OVERALL
22C SOLID
0.2420 INCHES NOMINAL
0.5 01-398-3924 CLIP,SPRING TENSION 5340 A preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available. 14304 919-0063 01-398-3925 CRUTCH 6515 An item used as an aid in ambulation. 11544 5180 DESIGN TYPE
MATERIAL AND LOCATION
LENGTH
TIP MATERIAL
SPECIAL FEATURES CANE
ALUMINUM TUBE
66.000 INCHES MINIMUM AND
76.000 INCHES MAXIMUM
RUBBER
W 01-398-3926 CRUTCH 6515 An item used as an aid in ambulation. 11544 5181 DESIGN TYPE
MATERIAL AND LOCATION
LENGTH
TIP MATERIAL
SPECIAL FEATURES CANE
ALUMINUM TUBE
56.000 INCHES MINIMUM AND
68.000 INCHES MAXIMUM
RUBBER
W 01-398-3927 TIRE,PNEUMATIC,VEHICULAR 2610 A mechanical device made of rubber, chemicals, fabric and steel or other materials, which, when mounted on a vehicular wheel, provides the traction and contains the fluid that sustains the load. Tube type tires are a form to inclose an inner tube containing air under pressure. Tubeless tires incorporate carcass materials and construction to provide fluid retention equal to that of a conventional tire and tube. 01CK3 053710100 SPECIAL FEATURES 2 PLY
BELTED
BLACK
RUBBER
20 X 700 X 8
TUBELESS
KNOBBY TREAD
REPLACEMENT 01-398-3928 STUFFING TUBE 5975 An item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s). S3172 1009.06 MATERIAL
SURFACE TREATMENT COPPER ALLOY OVERALL
NICKEL OVERALL 01-398-3929 O-RING 5331 A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION. S3956 3794351 01-398-3930 GASKET 5330 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT
SHIM
BEARING, WASHER, THRUST
and SPACER RING. Excludes DISK, VALVE
SEAL, NONMETALLIC ANGLE
SEAL, NONMETALLIC CHANNEL
SEAL, NONMETALLIC SPECIAL SHAPED SECTION
SHIELDING GASKET, ELECTRONIC
and RING, SEALING JAR. S3956
45152 3709997
5HS315 III END ITEM IDENTIFICATION HEMTT FAMILY (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS) 01-398-3931 WIRING HARNESS 6150 An item consisting of two or more individually insulated conductors (solid, stranded, or tinsel) of a definite length, with or without shielding, held together by lacing cord, metal bands, or similar type binding. The individual conductors are usually identified by color, or by alphabetic or numeric codes or symbols. The item may include fittings which provide for connection to other items. Excludes items which are branched, forked, jacketed, sleeved, or contained in a common covering. Also excludes CABLE ASSEMBLY (as modified)
HARNESS, ELECTRICAL EQUIPMENT
LEAD ASSEMBLY, ELECTRICAL
and WIRING HARNESS, BRANCHED. 98748 DAA3514W0038UNT NUCLEAR HARDNESS CRITICAL FEATURE
III END ITEM IDENTIFICATION HARDENED
B-2SE 01-398-3932 O-RING 5331 A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION. 45152
S3956 4HS694
960170 III END ITEM IDENTIFICATION HEMTT FAMILY (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS) 01-398-3933 O-RING 5331 A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION. S3956 960167 01-398-3934 INTERFACE UNIT,COMMUNICATION EQUIPMENT 5895 A self-contained item or group of items, which permit the transfer of information between various types of communications support equipment and/or systems. Adjustment, monitoring, and display functions may be included. Excludes MODEM (as modified). 67094 LM100-920 END ITEM NAME
END ITEM SOURCE
END ITEM IDENTIFICATION
THE MANUFACTURERS DATA; TAPE IF CONVERTER
67094
QGR
67094
LM100-920 01-398-3935 HOLDER ASSEMBLY,ELECTRICAL CONTACT BRUSH 5977 An item consisting of two or more HOLDER, ELECTRICAL CONTACT BRUSH on a common mounting or mounted on each other, or one HOLDER, ELECTRICAL CONTACT BRUSH mounted on a bracket. May include facilities for applying pressure to the brush(es) and may also be furnished with the brush(es). For items consisting of two or more brush holders (boxes) cast as an inseparable unit, see HOLDER, ELECTRICAL CONTACT BRUSH. See also RING, HOLDER, ELECTRICAL BRUSH. S0232 MTV003562 01-398-3936 MARKER,IDENTIFICATION 7690 A flexible item designed to be affixed to an object by adhesion. It may be any configuration and preprinted with legendary characters, symbol(s), letter(s), numeral(s), or coding signification. It may or may not be coated with a reflectorized substance. It does not contain data which indicates contents, destination or similar signification. May be in roll form if perforations or markings are provided for detaching items of a specific length. Excludes LABEL
TAPE, IDENTIFICATION
TAPE, PRESSURE SENSITIVE ADHESIVE
and SIGN FACE, ADHESIVE. S6038 559657 01-398-3937 PARTS KIT,SEAL REPLACEMENT,MECHANICAL EQUIPMENT 5330 A parts kit consisting of numerous items. The kit may contain seals, gaskets, packing, and/or retainers for repairing mechanical equipment. Excludes kits including tools, collars, pins, sleeves and associated hardware. Excluds PARTS KIT (1), SEAL REPLACEMENT, ARTILLERY. 75160
75160 AH143520
AH144594 01-398-3938 RETAINER,PACKING 5330 An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE. D9182
02697
73699 8-273
8-273N300-90
9000-035 ITEM 8 01-398-3939 SEAL,PLAIN 5330 A pliable rubber or composition ring-shaped element, split or jointless (solid) not encased in a metal shell, but having a spring, spreader and/or molded-in reinforcement. It is designed to be pressmounted between fixed and movable or moving parts to form a tight and effective seal. D9182
7K168
73699 18701000-312B
18701000-312B-N4257
9000-035 ITEM 30 01-398-3940 RING,WIPER 5330 A circular, single or multipiece, rigid, metallic or nonmetallic item having a centrally located hole with a sharp edge on the inside periphery. It is supplied in various cross-sectional shapes and is designed to be installed in a cylinder, shock strut, or similar device to remove excess oil, dirt, ice, and/or foreign material from a piston, ram, or sliding rod. Excludes PACKING, PREFORMED
RING, PISTON
and SEAL RING, METAL. D9182
30781
73699 D1000
4615D1000
9000-035 ITEM 10 01-398-3941 BEARING UNIT,BALL 3130 An assembled unit, composed of a housing incorporating a single or multiple row ball bearing(s), designed to meet various or specific conditions of mounting. 71956
9G100 124199
124199 BORE DIAMETER
MATERIAL
STYLE DESIGNATOR
BOLT CIRCLE DIAMETER
FLANGE THICKNES 0.6250 INCHES NOMINAL
STEEL BEARING
IRON CAST HOUSING
RUBBER SYNTHETIC SEAL; 01-398-3942 SYNTHESIZER,ELECTRICAL FREQUENCY 5895 An item with the combined functions of a FREQUENCY DIVIDER and a FREQUENCY MULTIPLIER. It provides a multiplicity of discrete output signals harmonically related to a standard source frequency, that may be utilized in radio receivers, transmitters, musical instruments, test equipment, density of rapidly selectable individual communication frequency bandwidth. See also GENERATOR, REFERENCE SIGNAL. Excludes FREQUENCY DIVIDER
FREQUENCY MULTIPLIER
and KEYBOARD INSTRUMENT, ELECTRONIC. 67094 LM100-870 CIRCUIT CONSTRUCTION TYPE
AVERAGE LIFE MEASUREMENT
CONNECTION TYPE AND LOCATIO SOLID STATE
NOT RATED
RECEPTACLE, COAXIAL RIGHT SIDE
3 RECEPTACLE, COAXIAL EX 01-398-3943 STANDOFF,THREADED,SPACING 5340 A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified)
use maximum dimensions(s) for compliance. 80205 NAS1831A4C48 CROSS-SECTIONAL SHAPE
WIDTH ACROSS FLATS
STYLE DESIGNATOR
LENGTH
SPECIFICATI HEXAGON
0.246 INCHES MINIMUM AND
0.254 INCHES MAXIMUM
8 LEFT INTERNAL AND RIG 01-398-3944 RING,RETAINING 5325 A resilient metal item, circular or nearly circular, which is designed to be inserted into an internal or external groove and retained by its own spring action, or it may have external prongs or projections designed to be inserted into a hole and retained by spring action of the prongs which grip by imbedding into the material. For items having internal prongs which perform the same function, see PUSH ON NUT. It is used to keep and/or lock a part(s) in position, as a ball bearing on a shaft or in a housing. See also CLIP, RETAINING and PIN, LOCK. Excludes RING, CONNECTING, ROUND. 45152
D9182
S3956 4HS732
914472
914472 III END ITEM IDENTIFICATION HEMTT FAMILY (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS) 01-398-3945 SPRING,HELICAL,COMPRESSION 5360 An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE. S3956
45152 3792348
4HS714 END ITEM IDENTIFICATION NSN 2320-01-097-0260 HEMTT (HEAVY EXPANDED MOBILITY TACTICAL TRUCK) 01-398-3946 PLUG,MACHINE THREAD 5365 An item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED. 02570
11649
12190 SS-16-HPST
SS-16-HPST
42593-208 MATERIAL
STYLE DESIGNATOR
HEAD DIAMETER
HEAD HEIGHT
OVERALL LENGTH
CONNECTI STEEL CORROSION RESISTING OVERALL
C15 PLUG, MACHINE
1.500 INCHES NOMINAL
0.16 01-398-3947 DRAPE,SURGICAL 6530 An item used in general, orthopedic and surgical procedures. 5U428 PD301-1020 MATERIAL
OVERALL LENGTH
OVERALL WIDTH
OPENING TYPE
OPENING QUANTITY
CENTER PLASTIC, POLYETHYLENE
406.0 MILLIMETERS NOMINAL
406.0 MILLIMETERS NOMINAL
ROU 01-398-3948 COMPUTER,AUTOMATED INFORMATION SYSTEM,CRYPTOLOGIC 5811 A computer designed to operate within an Automated Information System (AIS) supporting the cryptologic effort. These support functions include safeguarding Service Cryptologic Element (SCE) organic information and communications, terrestrial, airborne, and afloat. 7X430
11874 4/40FC-24-P40/X571/X660/X300
9321012-3 01-398-3950 BEARING,SLEEVE 3120 A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE
SPACER, SLEEVE
and WASHER (as modified). Excludes PIN, HOLLOW. 50632
53711
53711
53711
53711 KJB487116V
211015517
211066712
211094360
566-6404315-16 MATERIAL
STYLE DESIGNATOR COPPER ALLOY OVERALL
17C SOLID 01-398-3951 CONVERTER,FREQUENCY,ELECTRONIC 5963 An electronic device having frequency mixing circuits and an integral oscillator which mixes the incoming frequency(ies) with the oscillator frequency, the resultant frequency(ies) being a combination of the two sources. Includes equipment that performs these functions at either radio or power line frequencies. Excludes items that change frequency by means of rotating equipment or rectifier and switching or keying circuitry. 67094 LM100-924 CIRCUIT CONSTRUCTION TYPE
AVERAGE LIFE MEASUREMENT
CONNECTION TYPE AND LOCATIO SOLID STATE
NOT RATED
RECEPTACLE, COAXIAL RIGHT SIDE
4 RECEPTACLE, COAXIAL EX 01-398-3952 CONVERTER,FREQUENCY,ELECTRONIC 5963 An electronic device having frequency mixing circuits and an integral oscillator which mixes the incoming frequency(ies) with the oscillator frequency, the resultant frequency(ies) being a combination of the two sources. Includes equipment that performs these functions at either radio or power line frequencies. Excludes items that change frequency by means of rotating equipment or rectifier and switching or keying circuitry. 67094 LM100-910 CIRCUIT CONSTRUCTION TYPE
AVERAGE LIFE MEASUREMENT
CONNECTION TYPE AND LOCATIO SOLID STATE
NOT RATED
RECEPTACLE, COAXIAL RIGHT SIDE
3 RECEPTACLE, COAXIAL EX 01-398-3953 BAND,EXERCISE,PHYSICAL THERAPY 6530 An item designed to be used for exercising the upper and lower body for developing strength, motion and coordination of muscles, and other numerous applications, such as physical therapy and occupational therapy. May be cut to desired length. Excludes BAND SET, EXERCISE, PHYSICAL THERAPY. 3CXF7
Z2N11
1T615
1T615 C71-6102
NC55002-100
NC55002-100
THERA-TUBE MATERIAL
COLOR
EXTENDED LENGTH
SPECIAL FEATURES
III PART NAME ASSIGNED BY CO RUBBER, LATEX
RED
100.000 FEET NOMINAL
THERA-TUBE
RUBBER LATEX TUBING
MEDIU 01-398-3954 DRAPE,SURGICAL 6530 An item used in general, orthopedic and surgical procedures. 5U428 PD202-1010 MATERIAL
OVERALL LENGTH
OVERALL WIDTH
FEATURES PROVIDED
ADHESIVE AREA LENGTH PLASTIC, POLYETHYLENE
610.0 MILLIMETERS NOMINAL
457.0 MILLIMETERS NOMINAL
DIS 01-398-3955 DEVELOPER,PHOTOGRAPHIC 6750 A chemical substance which forms a developing solution that produces a visible image on exposed photographic sensitized surfaces. It does not include DEVELOPER, X-RAY FILM PROCESSING. 0K5T6 AFD 25 PHYSICAL FORM
UNIT PACKAGE CONTENT FORM
UNIT PACKAGE YIELD
MATERIAL TYPE FOR POWDER
SINGLE UNIT FOR MIXING
1.000 GALLONS
FILM AND
PAPER AND
PLATE
BLACK 01-398-3956 CONVERTER,SIGNAL DATA 1280 An electronic device which converts a data modulated signal of one form to a data modulated signal of another form. 80058
72314 CV-4280/AAQ-23
1395AE7001 CIRCUIT CONSTRUCTION TYPE
INCLOSURE TYPE
SPECIAL FEATURES
III END ITEM IDENTI SOLID STATE
ENCASED
ALTERED ITEM FROM NSN 1280-01-224-9344 CV-3958/AAQ-6
AN/A 01-398-3957 SENSOR UNIT ASSEMBLY 1280 72314 1395AB3001 GENERAL CHARACTERISTICS ITEM DESCRIPTION
III END ITEM IDENTIFICATION
THE MANUF NHA IS THE FLIR SENSOR ASSEMBLY
AN/AAQ-23 FLIR,AN/ASQ-151, B-52H
72314
1395AB 01-398-3958 SENSOR ASSEMBLY,FLIR SET 1280 72314 1395AA7001 GENERAL CHARACTERISTICS ITEM DESCRIPTION
III END ITEM IDENTIFICATION
THE MANUF COMPRISED OF FOUR SRUS: THE GIMBAL ASSEMBLY
THE SENSOR UNIT
SENSOR SUPPORT ELE 01-398-3959 BAFFLE,GEARBOX,AIRCRAFT GAS TURBINE ENGINE 2840 52661
77445 4081627-01
4081627-01 MATERIAL
SPECIAL FEATURES
CRITICALITY CODE JUSTIFICATION
III END ITEM IDENTIF STEEL CORROSION RESISTING
ECP NO. 93NA120 ADDED 6 HOLES TO BAFFLE AND AN OIL DE 01-398-3960 SLEEVE,WRAP-AROUND,PNEUMATIC 6515 An item constructed of a breathable inner/outer cotton polyester shell for patient comfort. It is designed to increase venous blood flow in the lower extremities of the inactive recumbent patient in order to help prevent deep vein thrombosis and pulmonary embolism. This item is color coded for edging and may be designed with or without air chamber. It is also compatible for use with the athrombic pump system intermittent compression device. 25611
89875 112-476
94-08-01-019 MB-T 01-398-3961 SLEEVE,WRAP-AROUND,PNEUMATIC 6515 An item constructed of a breathable inner/outer cotton polyester shell for patient comfort. It is designed to increase venous blood flow in the lower extremities of the inactive recumbent patient in order to help prevent deep vein thrombosis and pulmonary embolism. This item is color coded for edging and may be designed with or without air chamber. It is also compatible for use with the athrombic pump system intermittent compression device. 25611
89875 112-478
94-08-01-011 MB-T 01-398-3962 SLEEVE,WRAP-AROUND,PNEUMATIC 6515 An item constructed of a breathable inner/outer cotton polyester shell for patient comfort. It is designed to increase venous blood flow in the lower extremities of the inactive recumbent patient in order to help prevent deep vein thrombosis and pulmonary embolism. This item is color coded for edging and may be designed with or without air chamber. It is also compatible for use with the athrombic pump system intermittent compression device. 25611
89875 112-479
94-08-01-012 MB-T 01-398-3963 STARTER KIT,FINGER TRAP,ORTHOPEDIC 6515 An assortment of one of each size in either a double or single configuration finger traps. The item is designed for use in arthroscopic surgery of the forearm, wrist, and hand. 00GR3
89875 30522-999
94-08-01-029-MB-T FEATURES PROVIDED
SPECIAL FEATURES
III PART NAME ASSIGNED BY CONTROLLING AGENC STERILE
STERILE
DOUBLE
COMES W/AN ASSORTMENT OF SIZES
USED IN ARTHROSCOPIC S 01-398-3964 STENT KIT,PANCREATIC 6515 A collection of items designed to be used to endoscopically drain an obstructed pancreatic duct. May include wire guide, positioner, radiopaque stent, and other related items. 0DES3
0DES3
89875 GEENEN
GEPD-5-9
94-8-23-12 AH 01-398-3965 STENT KIT,PANCREATIC 6515 A collection of items designed to be used to endoscopically drain an obstructed pancreatic duct. May include wire guide, positioner, radiopaque stent, and other related items. 0DES3
0DES3
89875 GEENEN
GEPD-5-7
94-8-23-11 AH 01-398-3966 STENT KIT,PANCREATIC 6515 A collection of items designed to be used to endoscopically drain an obstructed pancreatic duct. May include wire guide, positioner, radiopaque stent, and other related items. 0DES3
0DES3
89875 GEENEN
GEPD-7-12
94-8-23-14 AH 01-398-3967 SHIELD,BUNION 6515 A soft felt, foam rubber like material designed with an elastic loop which positions the shield correctly. Item is used to absorb pressure and friction over the bony prominence often associated with hallux abducto valgus. Excludes PAD,PROTECTIVE,TOE
SEPARATOR,TOE
SPLINT,BUNION
and SPLINT,TOE. 1EU19
1EU19
1EU19
89875 BERKEMANN
42294
42294BR
94-8-29-19 AH 01-398-3968 TAG,MASS CASUALTY INCIDENT 6530 0Y0F5 MCI-TAG GENERAL CHARACTERISTICS ITEM DESCRIPTION
III PART NAME ASSIGNED BY CONTROLLING TRIAGE DESIGN
TAG
ARE COLOR CODED
FIRST PRI RED TAG
SECOND PRI YELLOW TAG
T 01-398-3969 DILATION KIT,PANCREATIC 6515 A coaxial group of items designed to dilate the accessory papilla. May include guiding catheter, radiopaque catheter, cope wire guide, and other related items. 0DES3
0DES3
89875 VENNES
VPDS-1
94-8-23-10 AH 01-398-3970 WELDMENT,DRAWBAR 3930 11201 DV316E-0008 MATERIAL
GENERAL CHARACTERISTICS ITEM DESCRIPTION
III END ITEM IDENTIFICATION STEEL
ITEM CONSISTS OF ONE PLATE, 5 LG, 2.75" W, 0.25" THK WELDED TO BOTTOM OF